Dehn

for upper and lower earth compounds, 60 x 60 mm, screws and nuts M8, with intermediate plate, DIN 48 845 D, for connections Rd/Rd, Rd/FI, FI/FI

for upper and lower earth compounds, 60 x 60 mm, screws and nuts M8, with intermediate plate, DIN 48 845 D, for connections Rd/Rd, Rd/FI, FI/FI

for universal use as cross, T and parallel clamps, two-piece, thread in the bottom part with hexagonal screw M10 DIN 933

Type K12 for main potential compensation, version with VDE characters according to DIN VDE 0100, part 410/540 and DIN EN 62305-3 comb-shaped contact rail, with 12 contact tongues, 10 clamps for Rd 2.5 to 95 mm2 or Rd Ø 10 mm, 1 clamp for Fl up to 4 x 30 mm

for Rd 7-10 Ø and Fl -40, DIN 48852

DEHNcord® Universal and flexible. Two- or one-pole surge arresters in compact design. To protect low-voltage consumer systems from overvoltages. For use in the flash protection zone concept at interfaces 0B - 1 and higher. Function / defect display by green-red marking in the viewing window. Conductor type 2 according to EN 61643-11.Overvoltage arrester DEHNcord L 2P 275Two-pole surge arresters for all 230 V installation systemsConductor type 2 according to EN 61643-11for use in cable duct systems,Underfloor systems and equipment storage boxesDefective indicatorMaximum continuous voltage: 275 V acProtection level: Rated output current: 5 kATotal leakage current: 20 kAMax. net overcurrent protection: 25 A gGor B/C 16 AEnergetic coordination according to DIN EN 62 305-4 Conductors of the Red/Line family

Lightning current-carrying DRL plug magazine 10 DA for almost all applications and expandable with DRL protection plug to the combination arrester, the integrated separating strip contacts allow testing, measuring and patching when plugged protection, the three-pole gas discharge arresters have a fail-safe function with optical display in case of defect

DEHNprotector® combined overvoltage protection for energy and data sides of a digital network connection NT, also suitable for telephone and fax machines, with optical operating and defect display connection input / output: RJ12 socket / RJ12 socket occupancy: 3/4 incl. Accessories suitable for RJ 11/12 and TAE connectors inserter according to the flash protection zone concept at interfaces 2-3 and higher

Combi depot DEHNshield TNC 2553-pin combination conductor for 230/400 V- TN C systems Conductor type 1 + type 2 according to EN 61643-11, width 4TEApplication-optimized use in compact electrical installationsspark gap technology with downstream current limitation Defective indicator Maximum continuous voltage: 255 V AC Protection level: Flash current (10/350): 37.5 kA Energetic coordination according to DIN EN 62305-4 Conductor of the Red/Line family, as well as directly to the terminal

Stationary ladder DEHNshield TT 2554-pole combination conductor for 230/400 V- TT and TN (C) -S systems,Width 4TEConductor type 1 + type 2 according to EN 61643-11Application-optimized use in compact electrical installationsspark gap technology with downstream current limitation Defective indicator Maximum continuous voltage: 255 V AC Protection level: Flash current (10/350): 50 kA Energetic coordination according to DIN EN 62305-4 Conductor of the Red/Line family, as well as directly to the terminal

DEHNshield® multi-pole combination arrester DEHNshield Basic, type 1 + type 2 according to EN 61643-11 based on spark gaps. Space-saving spark gap technology with only 1 TE / pole allows compact design. To protect residential buildings when retrofitting or refurbishment. Enables terminal protection. Meets all requirements of DIN VDE 0100-534 and DIN VDE 0100-443. Can be used directly at the feed point of the electrical system.Combi Devi Shield B TT 255 FM4-pin combination conductor for 230/400 V- TT- and TN (C) -S systems, Width 4 TE, with telecommunication contact Conductor type 1 + type 2 according to EN 61643-11Meets all requirements of DIN VDE 0100-534 and DIN VDE 0100-443spark gap technology with downstream current limitation Defective indicator Maximum continuous voltage: 255 V AC Protection level: Flash current (10/350): 30 kA Energetic coordination according to DIN EN 62305-4 Conductor of the Red/Line family, as well as directly to the terminal

Multi-pole, application-optimized combination arrester DEHNshield, type 1 + type 2 according to EN 61643-11 based on spark gaps. For the protection of residential buildings and for use in special applications. Enables terminal protection. For protection against overvoltages, even with direct flashes. Useable according to the flash protection zone concept at interfaces 0A– 2.

Single-pole surge arrester DEHNguard S, type 2 according to EN 61643-11, consisting of base part and plugged protective module. High device safety due to thermal dynamic control. To protect low-voltage consumer systems from overvoltages. For use in the flash protection zone concept at the interfaces 0B– 1 and higher.Overvoltage arrester DEHNguard S 2751-pole, modular, plug-in surge arresterwidth 1TE, Defective indicatorConductor type 2 according to EN 61643-11Maximum continuous voltage: 275 V ac/350 V dcProtection level: Rated output current: 20 kAShort-circuit strength: 50 kAeffEnergetic coordination according to DIN EN 62305-4 Head of the Red/Line family