List of products by brand Protec

Clamping strips N-neck clamping strip 3 x 25 mm2, 14 x 4 mm2, PE connector strip 6 x 25 mm2, 28 x 4 mm2, N/PE connector strip 3 x 25 mm2, 14 x 4 mm2

Soldering tine flux-filled, halogen-containing soft soldering wire. Lead-containing, high temperature resistance, flux-medium residues do not cause any corrosion in non-ferrous metals and can therefore remain on the soldering site. Flow medium according to DIN EN 29454.1, 1.1.2.B and DIN EN 61190-1-3, ROM1. For manual and machine soldering, Sn 60 Pb 40. Flow percentage: 2.5 % Diameter: 1 mm Weight: 250 g

Electromechanical gong: Ding-Dong, dimensions: 116 x 116 x 48 mm, for 9 W battery or transformer 8 W, 1 A, about 75 db (A) - 450 ma, plaster, batteries not included. Protection: IP20 Volume: 75 db Color: white

Plastic material housing with metal blade guide,Cutter 140 mm incl. 1 blade cutter 170 mm incl. 3 blades (1 mounted + 2 blades in the magazine) Version: Replacement blades Length of blade: 170 mm

Fitting key DIN WDE 0636-3. Size: D01 - D03. Suitable for all sleeve adapters D01-D03. Color: red, similar RAL 2002 Material Handle: plastic

Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 100 mm Width: 100 mm Depth: 42 mm Number of inserts: 12

Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 89 mm Width: 43 mm Depth: 37 mm Number of inserts: 10

Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 75 mm Width: 75 mm Depth: 37 mm Number of inserts: 7

Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 85 mm Width: 85 mm Depth: 37 mm Number of inserts: 12

Moisture area outlets, loosely sprinkled thermoplastic flame-retardant material, IP55 with condensation water opening, 4 floor inlets M20, empty without clamps, external fastening points, opening cutter beiligend, halogen-free, operating temperature range -25 °C to 40 °C Length: 85 mm Width: 85 mm Depth: 37 mm Protection type (IP): IP54 Color: grey lid: non-transparent Number of inserts 12

Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 76x76x51 mm For cable Ø: 3-14 mm Max. Conductor cross-section: 2.5 mm2

Incl. Suitable for copper and aluminum conductors, application areas: interior, open air, soil, water and installation equipment etc. Longitudinal and crosswater sealing, good mechanical strength, high-quality transparent, impact-resistant plastic mould shells, immediately ready to use, without cable connectors. Curing time: about 24 hours depending on the outside temperature. Power supply can be switched on immediately after installation of the socket (not to be taken into account). Cable up to mm2: 4 x 10/5 x 6 cable Ø: 7 - 26 mm casting resin: 180 ml