List of products by brand Protec

Full rubber coupling with cover protective contact DIN 49440, connection line up to 3 x 2.5 mm2, with cover, 2-pin + PE, 16 A / 250 W, with metal snap closure full rubber SCHUKO coupling, with cuff and closure cover, 2 polig + earth, 16A 250W, according to DIN 49440/441, color black, protection type spray water-protected connection IP44, with hammer signs and lines For "release conditions" (according to WDE): Yes Plug direction: straight Connection technology: screw clamp Color: black Material: solid rubber Halogen-free: Yes Protection type (IP): IP44 RAL number: 9005

Triple full rubber coupling PWGK 21: With LED for operating display. Connection lines up to 3 x 2.5 mm2, 2-pin + PE, 16 A, 3-fold design, splash-proof. Triple full rubber SCHUKO coupling with self-closing hinged cover, 2 polig + earth, 16A 250W, according to DIN 49440/441, color black, protection type splash-proof IP44, with hammer sign, for connection of lines up to 3x2.5 mm2 plug-in direction: straight connection technology: screw clamp Suitable for protective contact pin: yes Color: black Material: full rubber Halogen-free: yes Protection type (IP54):

Flange socket SCHUKO® built-in socket, built-in opening 42.5 mm, for replacement requirements, 2-pin + PE, 16 A , 250 W according to DIN 49440 built-in SCHUKO socket, made of thermoplastic, color: blue, 2-pin + earth, 16A 250W, according to DIN 49440, with screw connection, protection type splash-proof IP54, with hammer mark, fourfold flange and hinged cover, line approx

Type of protection according to EN 50262, type of protection according to EN 60529, cable gland including hexagonal counter nut + sealing ring, with integrated sealing lip, silicone-free, application temperature range: -40°C to +100°C thread length: - PKGM12, PKGM16 = 9 mm - PKGM20, PKIP25 = 10 mm - PKGM32 = 12 mm

Branch boxes, with clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV resistant type 308, 407 and 607 integrated thread (no counter nut required). Type 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids, seawater. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: Through 4 internal openings outside the sealing area or with type 308 and 407 with quick mounting bracket. 4 unreleasable lid screws. Screw clamps 5-pin. Type 308: Clamp 2.5 mm2, cable insert 8 side, membrane insert, 400 W Type 407: Clamp 4.0 mm2, cable insert 7 side +2 in the bottom, membrane insert, 690 W Type 607: Clamp 6 mm2, cable insert 7 side +3 in the bottom, membrane insert, 690 W Type 1010: Clamp 10mm2, cable insert 10 side +2 in the bottom, with gasket, 690 W14. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 110x110x66 mm For cable Ø: 5.2-17 mm / M25 Max. Conductor cross section: 6.0 mm2

Branch boxes, with clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV resistant type 308, 407 and 607 integrated thread (no counter nut required). Type 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids, seawater. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: Through 4 internal openings outside the sealing area or with type 308 and 407 with quick mounting bracket. 4 unreleasable lid screws. Screw clamps 5-pin. Type 308: Clamp 2.5 mm2, cable insert 8 side, membrane insert, 400 W Type 407: Clamp 4.0 mm2, cable insert 7 side +2 in the bottom, membrane insert, 690 W Type 607: Clamp 6 mm2, cable insert 7 side +3 in the bottom, membrane insert, 690 W Type 1010: Clamp 10mm2, cable insert 10 side +2 in the bottom, with gasket, 690 W14. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 140x140x82 mm For cable Ø: 6-21 mm / M20-M32 Max. Conductor cross section: 10 mm2

O ~ 20 Ohm, acoustic through-test 0 ~ 250 Ohm, high-performance LED flashlight, contactless voltage testing, voltage strength: 300 W, built-in power alarm, protection: IP 40, power supply: 3x Mignon (type AA,) delivery without batteries, batteries see type. No. 05703716, Dimensions: 120 x 60 x 30 mm Input indicator: optical/acoustically offload >50 W AC/DC: Yes Flashlight function: Yes

Plug-in tester with FI-Test Easy detection of connection errors in 230 volt systems, connection errors are displayed on the device by different lighting configurations of the signal lamps, is tested for the correct connection of the conductors, also usable in classic zeroing, FI-protection test (10, 30, 100, 300, 500 ma,) tripping time FI-tester: 200 ms, display: Optical, 6 test lamps 78 x 53

Capacitive measuring method, no current flow necessary, display: Optically using LED, protection class IP40, housing made of impact-resistant ABS plastic, incl. 2x AAA batteries, replacement batteries see Art. No. 05103714 Length: 160 mm Voltage measurement range: 110 - 1000 W Single-pole phase display: Yes Non-contact voltage detection: Yes Measurement circuit category: CAT III

Up to 100 A tension-free handle tabs made of metal, from 125 A tension-free handle tabs made of metal with center detector, according to DIN WDE 0636 part 2, DIN 43620 and DIN EN/IEC 60269-1 and DIN EN/IEC 60269-2, nominal voltage: AC 500 W, DC 220 W, selectivity inserts factor: 1.6, operating class (gL)-gG

Up to 100 A tension-free handle tabs made of metal, from 125 A tension-free handle tabs made of metal with center detector, according to DIN WDE 0636 part 2, DIN 43620 and DIN EN/IEC 60269-1 and DIN EN/IEC 60269-2, nominal voltage: AC 500 W, DC 220 W, selectivity inserts factor: 1.6, operating class (gL)-gG

Up to 100 A tension-free handle tabs made of metal, from 125 A tension-free handle tabs made of metal with center detector, according to DIN WDE 0636 part 2, DIN 43620 and DIN EN/IEC 60269-1 and DIN EN/IEC 60269-2, nominal voltage: AC 500 W, DC 220 W, selectivity inserts factor: 1.6, operating class (gL)-gG