List of products by brand Protec

Soldering connector with shrink hose insulation for more and fine-wired conductors, soldering tins two-layer insulation with thermoplastic inner adhesive, after shrinking a waterproof connection, shrink temperature: 130°C, temperature range -55°C to 125°C, pass resistance (ohm cm): greater than or equal to 10 high 15, pass resistance (KV/mm): greater than or equal to 25, stress resistance > 600W, Max.: 12W

Flat plug sleeves with shrink hose insulation brass (cuzn,) metallic insulation support Cu-ETP, galv. Sn, two-layer insulation with thermoplastic inner adhesive, after shrinking a waterproof connection, shrink temperature: 100° C., impact strength: 30kV/mm, elongation strength: 27 Mpa, expansion: 450.% length change: max. 10.% gravity (density ratio) 0.95 cm3. Plug dimensions: flat 6,3x0,8 mm. Matching tool: PCSW crimp pliers (Art. 05104819). Nominal cross-section of/to: 0.5 - 1.5 mm2 Colour of insulation: red

Flat plug sleeves with shrink hose insulation brass (cuzn,) metallic insulation support Cu-ETP, galv. Sn, two-layer insulation with thermoplastic inner adhesive, after shrinking a waterproof connection, shrink temperature: 100° C., impact strength: 30kV/mm, elongation strength: 27 Mpa, expansion: 450.% length change: max. 10.% gravity (density ratio) 0.95 cm3. Plug dimensions: flat 6,3x0,8 mm. Matching tool: PCSW crimp pliers (Art. 05104819). Nominal cross-section of/to: 1.5 - 2.5 mm2 Color of insulation: blue

Flat plug with shrink hose insulation brass (cuzn,) metallic insulation support Cu-ETP, galv. Sn, two-layer insulation with thermoplastic inner adhesive, after shrinking a waterproof connection, shrink temperature: 100° C., impact strength: 30kV/mm, elongation strength 27 Mpa, extension 450,% length change max. 10.% gravity (density ratio) 0.95 cm3. Plug dimensions: flat 6,3x0,8 mm. Fitting tool: PCSW crimp pliers (Art. 05104819). Nominal cross-section of/to: 0.5 - 1.5 mm2 Colour of insulation: red

Flat plug with shrink hose insulation brass (cuzn,) metallic insulation support Cu-ETP, galv. Sn, two-layer insulation with thermoplastic inner adhesive, after shrinking a waterproof connection, shrink temperature: 100° C., impact strength: 30kV/mm, elongation strength 27 Mpa, extension 450,% length change max. 10.% gravity (density ratio) 0.95 cm3. Plug dimensions: flat 6,3x0,8 mm. Fitting tool: PCSW crimp pliers (Art. 05104819). Nominal cross-section of/to: 1.5 - 2.5 mm2 Color of insulation: blue

Plaster plate screws according to EN 14566:2008 + A1:2009/Class 48/TMN, Drive: Cross slot - Philips (PH), surface: phosphated. Head shape: trumpet head. Material: steel. Thread-Ø: 3.9 mm. Length: 55 mm Version: PH 2, coarse thread

Quick-mounting screws with drill tip Gib plate screws according to EN 14566:2008 + A1:2009/Class 48/TSD, Drive: Cross slot - Philips (PH), fine thread, head shape: trumpet head, surface: phosphated.Gewinde-Ø: 3.5 mm. Version: PH 2. With lace. Material: steel Length: 25 mm

Suitable for: C20/25 to C50/60. For fastening: pipe and ventilation lines, brackets, ladders, cable trays, suspended ceilings, steel structures such as grids or formwork supports. Fast mounting with high holding force. Low drilling effort and easy impact with the hammer or machine. Metric internal thread for the use of commercially available screws and threaded rods. For use as multiple fastening of non-supporting systems in concrete. Length: 30 mm Thread: M8 Hole-Ø: 10 mm

Solventable cable tie material: LDPE (Low Density polyethylene / Soft polyethylene). Is an economical cable tie for light loads that can be re-released and reusable. For indoor use. Halogen- and silicone-free. Resistance to oils, fats and automotive fuels. Color: red. Application temperature: -30°C to +65°C, short term to +85°C Bundle-Ø mm: 3-26 Tensile force: 70 - 100 N B x L: 3.5x120 mm

Solventable cable tie material: LDPE (Low Density polyethylene / Soft polyethylene). Is an economical cable tie for light loads that can be re-released and reusable. For indoor use. Halogen- and silicone-free. Resistance to oils, fats and automotive fuels. Color: red. Application temperature: -30°C to +65°C, short term to +85°C Bundle-Ø mm: 4-61 Tensile force: 135 - 200 N B x L: 3.8x240 mm

Solventable cable tie material: LDPE (Low Density polyethylene / Soft polyethylene). Is an economical cable tie for light loads that can be re-released and reusable. For indoor use. Halogen- and silicone-free. Resistance to oils, fats and automotive fuels. Color: red. Application temperature: -30°C to +65°C, short-term to +85°C Bundle-Ø mm: 5-83 Tensile force: 155 - 250 N B x L: 4.4x320 mm

Solventable cable tie material: LDPE (Low Density polyethylene / Soft polyethylene). Is an economical cable tie for light loads that can be re-released and reusable. For indoor use. Halogen- and silicone-free. Resistance to oils, fats and automotive fuels. Color: red. Application temperature: -30°C to +65°C, short term to +85°C Bundle-Ø mm: 40-140 Tensile force: 275 - 350 N B x L: 5.6x500 mm