List of products by brand Protec

PROTEC.class PSHK 40-2 collection holder 50 pieces
2-7 days
For wall and ceiling mounting suitable. Material: polyamide. Flat design. Temperature resistance: -30°C to +80°C. Hole: 6 mm. Recommended laying distances: 50 cm to 70 cm. Maximum permissible load: 2 kg. Halogen-free. Material: plastic. Color: light grey Number of lines NYM 3x1.5: 40
€75.45
PROTEC.class PND 1050 Nylon Dowel 10x50 VE 50
2-7 days
Plastic dowel use with wood or chipboard screws, temperature resistance: -40°C to +75°C, suitable for concrete B25, solid brick, natural stone, block brick, with collar / rim: PNDK 526, 631, 841, 1060. Material quality: Nylon. Length: 50 mm Hole diameter: 10 mm
€5.78
PROTEC.class PSK 525H connector 5 x 0.2 - 2.5 mm2 40 pieces
2-7 days
Plug-in clamp with lever EN 60998-1:2004, EN 60998-2-2:2004, plug-in clamp for rigid, multi-wire and flexible conductors, for rigid conductors it is not necessary to open/close the lever before inserting the conductor, for flexible conductors, several wire cross sections compatible in one clamp, material housing and lid: polycarbonate, material insert: copper, material spring: stainless steel, insulation length 10 mm. Ambient temperature: T85, Protection type: IP20, Lever colour: blue, Test opening: Phase tester and test pin (max. Ø 2 mm,) View window for checking the clamping point leads to increased safety during assembly, high draw-off forces, time-saving, screw-free technology, easy handling Number of clamping points: 5 Colour: transparent Rated cross-section from/to: 0.2 - 2.5 mm2 Rated voltage: 450 W Rated current: 24 A
€23.07
PROTEC.class PSH 30SP collection holder with dowel 50 pieces
2-7 days
Collector brackets with dowel polypropylene. suitable for wall and ceiling mounting. Mounting distance with full occupancy 50 to 60 cm. Hole 6 mm. Halogen-free. Material: plastic. Color: light grey. with dowel 6x40 mm. Drill depth 45 mm Test temperature 960° C. Flame resistant according to DIN WDE 0471/DIN IEC 695 Part 2-1 Max. Load capacity: 1100 N Number of lines NYM 3x1.5: 30
€82.10
PROTEC.class PNDK 1060 Nylon dowel m. Collar 10x60 50 pieces
2-7 days
Plastic dowels use with wood or chipboard screws, temperature resistance: -40°C to +75°C, suitable for concrete B25, solid brick, natural stone, block brick, with collar / rim: PNDK 526, 631, 841, 1060. Material quality: Nylon. Length: 60 mm Hole diameter: 10 mm
€12.17
PROTEC.class PKB-S 7.5 x 360 natural cable tie VE 50
2-7 days
For use in the interior, stainless steel tongue, material: polyamide 6.6, petrol-resistant, halogen-free, application temperature range: -40°C to +85°C, UL approval, band closure: steel nose width of the band: 7.5 mm band length: 360 mm Max. Bundle diameter: 101 mm
€17.17
PROTEC.class PKB-S 7.5 x 360 s. Cable tie VE 50
2-7 days
For outdoor use, halogen- and silicone-free, UV- and weather-resistant, stainless steel tongue, material: polyamide, petrol-resistant width of the band: 7.5 mm Band length: 360 mm Max. Bundle diameter: 101 mm
€17.17
PROTEC.class PNG 42 nail instrumentedosis 60mm / 42mm high 50 pieces
2-7 days
With nail strap for UP mounting, flame resistance 650°C according to WDE 0606 Part 1 / DIN IEC 695 Part 2-1, standard distance of screw domes 60 mm, standard distance combination 71 mm, fully insulated spacer, non-rotational, introduction for IEC pipe up to max. M20, Halogen-free version: without screws Diameter: 60 mm Depth: 42 mm Colour: black With nail straps: Yes
€26.61
PROTEC.class PSK 8 plug clamp 8 x 0.5-2.5mm2 transp. 50 pieces
2-7 days
Compact design, high spring force, for solid copper conductors of 0.5 mm2 - 2.5 mm2, temperature resistance: -30°C to +110°C, self-extinguishing according to UL 94V-2, no plugging bare lines possible, with test slot Number of clamping points: 8 Colour: transparent Nominal cross-section from/to: 0.5 - 2.5 mm2
€21.05
PROTEC.class PSGS 5 x 16 threaded screw DIN 7985 50 pieces
2-7 days
Thread screws Lens head DIN 7985 Lens head DIN 7985, similar to ISO 7045, Material quality: 4.8, Drive: Cross-slotpsgsk incl. Nut, in blister, surface: galvanically galvanized, head shape: lens head, thread to head, metric rule thread. Material: Steel Version: PH 2 Length: 16 mm Thread: M5
€4.12
PROTEC.class PSGS 5 x 20 threaded screw DIN 7985 50 pieces
2-7 days
Thread screws Lens head DIN 7985 Lens head DIN 7985, similar to ISO 7045, Material quality: 4.8, Drive: Cross-slotpsgsk incl. Nut, in blister, surface: galvanically galvanized, head shape: lens head, thread to head, metric rule thread. Material: Steel Version: PH 2 Length: 20 mm Thread: M5
€4.66
PROTEC.class PNG 63 nail instrumentedosis 60mm / 63mm high 50 pieces
2-7 days
With nail strap for UP mounting, flame resistance 650°C according to WDE 0606 Part 1 / DIN IEC 695 Part 2-1, standard distance of screw domes 60 mm, standard distance combination 71 mm, fully insulated spacer, non-rotational, introduction for IEC pipe up to max. M20, Halogen-free version: without screws Diameter: 60 mm Depth: 42 mm Colour: black With nail straps: Yes
€52.18