List of products by brand Protec

Insulated end sleeves DIN 46228 part 4, halogen-free and heat-resistant up to 110°C Nominal cross-section: 1.0 mm2 Sleeve length: 10 mm Colour: red

Heat resistant up to 105°C, halogen-free nominal cross-section: 1.0 mm2 core cross-section: 2 x 1.0 mm2 sleeve length: 10 mm Color: red

Heat resistant up to 105°C, halogen-free nominal cross-section: 1.5 mm2 core cross-section: 2 x 1.5 mm2 sleeve length: 12 mm Color: black

Material: polyamide, screw-in nail with flat head, for minor fastenings in construction, metal, sanitary and electrical areas, for fastening light loads, such as angles, plates, sheets, cable channels and any components for non-slower assembly, Removable by drive in the screw head, areas of use: concrete, solid brick, lime sandstone, pore concrete, high hole brick, limestone temperature. Screw nail included Length: 30 mm Hole diameter: 5 mm

Insulated end sleeves DIN 46228 part 4, halogen-free and heat-resistant up to 110°C Nominal cross-section: 1.5 mm2 Sleeve length: 10 mm Colour: black

Plug SCHUKO® 2-pin + PE, 16 A / 250 W, protective contact DIN 49441, connection line up to 3 x 1.5 mm2 Color: white Plug direction: straight connection technology: screw clamp Protection type (IP): IP20 SCHUKO plug made from thermoplastic, 2 polig + earth, 16A 250W, according to DIN 49440/441, color white

Coupling, PWTSC protective contact DIN 49440, 2-pin + PE, 16 A / 250 W, connection line up to 3 x 1.5 mm2. PPKU 08: With Knickschutztülle. SCHUKO coupling, 2 polig + earth, 16A 250W, according to DIN 49440/441, made of PWTSC, grey plug-in direction: straight connection technology: screw clamp Color: grey Material: plastic Material quality: PWTSC Protection type (IP): IP44 RAL number: 7035

Flat design, lid with snap-on closure Device connection box made of thermoplastic for UP installation with spreader claw fastening, flat design, color white, lid with snap-on closure, clamps 5x2.5 mm2, according to WDE 0606 Color: white Suitable for protection type (IP): IP20 Version: with claw carrier Mounting type: Unterputz Mounting type: UP clamps: 5x2.5 mm2 Connecting quality: screw clamp HalogenAL

Material Cans For indoor use, for UP and AP installation, cap with snap closure, temperature resistance: temperatures up to a maximum of 70°C Device socket made of thermoplastic for UP or AP installation with claw support and additional screw fastening, color white, lid with snap closure, clamps 5x6 mm2 - A large connection space is provided according to WDE 0606 Color: white Suitable for protection (20)

Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 85x85x51 mm For cable Ø: 3-12 mm / M20 Max. Conductor cross section: 4.0 mm2

Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 110x110x66 mm For cable Ø: 5.2-17 mm / M25 Max. Conductor cross section: 6.0 mm2

Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 140x140x82 mm For cable Ø: 6-21 mm / M20-M32 Max. Conductor cross-section: 10.0 mm2