List of products by brand Protec

2017 Test plaques for permanent identification of cables and cables. For cable diameter 8-25 mm. Protection of the plaque by laminate. Marking with PKMP cable marker or PSKZ-D Schaffner control tong. Color: red, Dimensions: 100 x 25 mm, Content: 80 stickers. Version: Cable test plate 2017

Bid sign: Hand protection Bid sign for use of a hand protection, imprint: bib sign 'Use hand protection,' conforms to DIN EN ISO 7010 and A SR A 1.3 (2013,) self-adhesive film, Ø 100 mm, color: blue

Radio receiver for digital timer clocks Implementation of global synchronization of time and location coordinates by means of GPS antenna, thus facilitating the establishment of location determination. The time for regional requirements is synchronized with DCF antenna via the DCF77 radio signal. In conjunction with PDSZN Nezteil for antenna and PDSU21GDJN annual timer or PDSU22GDJN annual timer. Version : For DCF77 Signal

Fire-protection mark: fire detectors long-lasting fire-protection mark for marking the location of fire alarm systems, imprint: fire-protection mark fire alarm, long-after-lighting properties exceed the requirements of DIN 67510 by more than 140%, conforms DIN EN ISO 7010 and A SR A 1.3 (2013,) self-adhesive film, dimensions: 148 x 148 mm

Bidmark: Mask Bidmark for using a mask, imprint: Bidmark 'Use mask,' corresponds to DIN EN ISO 7010 and A SR A 1.3 (2013,) self-adhesive film, Ø 100 mm, color: blue

Bidding sign for the use of eye protection, imprint: bidding mark 'Use eye protection,' corresponds to DIN EN ISO 7010 and A SR A 1.3 (2013,) self-adhesive film, Ø 100 mm, colour: blue

Bid sign: hearing protection Bid sign for use of hearing protection, imprint: Bid sign 'Use hearing protection,' conforms to DIN EN ISO 7010 and A SR A 1.3 (2013,) self-adhesive film, Ø 100 mm, colour: blue

Bid sign: head protection Bid sign for use of head protection, imprint: Bid sign 'Use head protection,' corresponds to DIN EN ISO 7010 and A SR A 1.3 (2013,) self-adhesive film, Ø 100 mm, color: blue

Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 95x95x60 mm For cable Ø: 3-12 mm / M20 Max. Conductor cross section: 4.0 mm2

Patch panel for communication distributor Keystonepatch field suitable for all PROTEC communication distributors (PAPW 36-3K, PAPW 48-4K, PUPHW 42-3K, PUPHWW 56-4K).12 module locations. Dimensions (Hxbxt): 65x266x44 mm. Material: galvanized steel. PWTSC free, halogen-free, silicone-free, heavy metal-free.

WDE Aderend Sleeves Press Pliers Length: 140 mm

Branch boxes, with clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV resistant type 308, 407 and 607 integrated thread (no counter nut required). Type 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids, seawater. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: Through 4 internal openings outside the sealing area or with type 308 and 407 with quick mounting bracket. 4 unreleasable lid screws. Screw clamps 5-pin. Type 308: Clamp 2.5 mm2, cable insert 8 side, membrane insert, 400 W Type 407: Clamp 4.0 mm2, cable insert 7 side +2 in the bottom, membrane insert, 690 W Type 607: Clamp 6 mm2, cable insert 7 side +3 in the bottom, membrane insert, 690 W Type 1010: Clamp 10mm2, cable insert 10 side +2 in the bottom, with gasket, 690 W14. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 95x95x60 mm For cable Ø: 3-12 mm / M20 Max. Conductor cross section: 4.0 mm2