List of products by brand Protec

Up to 100 A tension-free handle tabs made of metal, from 125 A tension-free handle tabs made of metal with center detector, according to DIN WDE 0636 part 2, DIN 43620 and DIN EN/IEC 60269-1 and DIN EN/IEC 60269-2, nominal voltage: AC 500 W, DC 220 W, selectivity inserts factor: 1.6, operating class (gL)-gG

In accordance with DIN WDE 0636 Part 201, DIN 43620 as well as DIN EN/IEC 60269-1 and DIN EN/IEC 60269-2 Nominal voltage: AC 500 W Portable handle tabs made of metal with hinge detectors. Selectivity factor: 1.6. Operating class (gL)-gG: Full range safety inserts (for cable and cable protection) for general applications. Measurement voltage: 500 W. Measurement switch-off capacity: 120 ka. Measurement frequency: 45 Ö62 Hz. Steatit/Cordierite insulating body. Single-piece full contact knives with surface treatment. Anti-magnetic cover plate made of aluminum alloy. Copper melting ladder. Measurement current: 63 A Size: NH2 Power: 6.8 W

NH00 Locking inserts with metal handle tabs NH00 Low-voltage protection, according to DIN WDE 0636 part 2, nominal voltage: 500W AC / 220W DC, width: up to 100A 20 mm / from 125A 30 mm, NH000 to 100A / NH00 from 125A, voltage-carrying grip tab, operating class (gL)-gG full-range safety inserts (for cable and cable protection) for general applications

NH00 Locking inserts with metal handle tabs NH00 Low-voltage protection, according to DIN WDE 0636 Part 2, nominal voltage: 500W AC / 220W DC, width: up to 100A 20 mm / from 125A 30 mm, NH000 to 100A / NH00 from 125A, voltage-carrying grip tab, operating class (gL)-gG full-range safety inserts (for cable and cable protection) for general applications

NH00 Locking inserts with metal handle tabs NH00 Low-voltage protection, according to DIN WDE 0636 part 2, nominal voltage: 500W AC / 220W DC, width: up to 100A 20 mm / from 125A 30 mm, NH000 to 100A / NH00 from 125A, voltage-carrying grip tab, operating class (gL)-gG full-range safety inserts (for cable and cable protection) for general applications Rated current: 63

NH00 Locking inserts with metal handle tabs NH00 Low-voltage protection, according to DIN WDE 0636 part 2, nominal voltage: 500W AC / 220W DC, width: up to 100A 20 mm / from 125A 30 mm, NH000 to 100A / NH00 from 125A, voltage-carrying handle tab, operating class (gL)-gG full-range safety inserts (for cable and cable protection) for general applications

D01 / D02 safety caps (Neozed) According to EN 60269, DIN WDE 0636-3, D0 - rated current 16A - E14 and D02 - rated current 63A - E18 version, with test hole, rated voltage: 400 W AC, 250 W DC Material: porcelain Size: D02

Surface PSKAS M6 - PSKAS M30: Galv. galvanized according to DIN 50961, thick-layer passivated, surface PSKAS M38 - PSKAS M60: Send. galvanized according to EN 10327, tested according to DIN 4102-12 : 1998-11 (part 1: cable laying with clamps) for laying fire protection cables, with good-night connection class. Minimum order quantity: 1 piece. Diameter of/to: 25 - 27 mm

D0 screw caps made of plastic With test hole, AC 400 W, DC 250 W Version: 63 A Material: Plastic For size: D02

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. WDE 0603 Clamping points: 7 or 12. Clamp: brass, cross section 6 mm x 9 mm. Screws: M5, steel, galvanized/passivated (Cr-VI-free). Housing: polyamide, impact resistant, flameproof. Corners rounded. Line connection: 1 ... 16 mm2 rigid / 1 ... 10 mm2 fine-wired with wire end sleeve (round pressing or square pressing, trapezoidal pressing up to 6 mm2) screw connection, recommended. Applying torque 1.2 Nm.- Standards / Requirements: Connecting material for low voltage circuits for household and similar purposes WDE 0613, EN 60998. Mounting: On DIN support rail according to EN 50022 / EN 60715. Nominal current: 63 A. Insulation voltages: 690 W (distributor and control cabinet inlet, degree of contamination 2). 500 W pollution level 3) Uimp = 6 kw. Touch protection: IP00 Type additive Ä-F2 –: IP20, fingerproof. Screw terminal. Combi-cross slot Z2 (positive).

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. WDE 0603 Clamping points: 7 or 12. Clamp: brass, cross section 6 mm x 9 mm. Screws: M5, steel, galvanized/passivated (Cr-VI-free). Housing: polyamide, impact resistant, flameproof. Corners rounded. Line connection: 1 ... 16 mm2 rigid / 1 ... 10 mm2 fine-wired with wire end sleeve (round pressing or square pressing, trapezoidal pressing up to 6 mm2) screw connection, recommended. Applying torque 1.2 Nm.- Standards / Requirements: Connecting material for low voltage circuits for household and similar purposes WDE 0613, EN 60998. Mounting: On DIN support rail according to EN 50022 / EN 60715. Nominal current: 63 A. Insulation voltages: 690 W (distributor and control cabinet inlet, degree of contamination 2). 500 W pollution level 3) Uimp = 6 kw. Touch protection: IP00 Type additive Ä-F2 –: IP20, fingerproof. Screw terminal. Combi-cross slot Z2 (positive).

Zero,- protective conductor and diverter terminal conductor terminals for mounting on DIN support rails, e.g. for installation small distributors and counters acc. WDE 0603. Clamping points: 14 plug connections + 1 screw connection possible to mount behind the clamp cover. Corners rounded. Cable connection: plug connection 12 x 1 ... 2.5 mm2 rigid/multi-reversal or. 0.75 ... 1.5 mm2 with wire end sleeve 2 x 1 ... 4 mm2 rigid/several, plug connection 1 ... 2.5 mm2 with wire end sleeve screw connection (feed line): 1 x 1.5 ... 25 mm2 rigid/several. 1 ... 16 mm2 with wire end sleeve. standards / regulations: connecting material - electrical copper conductors; Safety requirements for screw terminals and screwless clamping points. WDE 0609, Part 1 / EM 60999-1 Connecting material for low voltage circuits for household and similar purposes WDE EN 60998-1; WDE 0613-1. Mounting: On DIN support rail according to EN 50022 / EN 60715 rated current: 80 A (feed line). Insulation voltages: 500 V (degree of contamination 2, overvoltage category III). Contact protection: BGW A2 / WBG4, fingerproof