List of products by brand Protec

Self-adhesive digits and letters polymer stabilized film made of soft PVC, self-adhesive on carrier film for easy bonding, for long-term labels such as house number lights and markings in the indoor and outdoor areas, bonding temperature: min. +8° C, Detection range: 25 m, Label dimensions: 100 mm x 140 mm Height: 120 mm Version: B Colour: black

Self-adhesive digits and letters polymer stabilized film made of soft PVC, self-adhesive on carrier film for easy bonding, for long-term labels such as house number lights and markings in the indoor and outdoor areas, bonding temperature: min. +8° C, Detection range: 25 m, Label dimensions: 100 mm x 140 mm Height: 120 mm Version: C Colour: black

Heat detectors heat detectors can save lives and belong to any household, signal triggering: heat/heat, alarms safely and reliably at too high temperature, continuous monitoring: constantly monitors the air temperature, detects: no smoke, no gas or fire, especially for smokey and humid areas where permanent steam development occurs, such as kitchen, bathroom, garage, sleeping room, etc. 24 hours protection, easy and easy assembly, assembly recommendation: On the ceiling or above on a wall, mounting: wireless, heat sensor reacts at over 57 °C, 85dB alarm signal (extra loud,) test button for function testing, incl. 9 volt battery, battery life approx. 1 year, battery control indicator: warning message with too weak battery, operating temperature: 0 - 70 °C, operating humidity: 25 - 95 %, dimensions: Ø107 x 43 mm Colour: pure white RAL number (similar): 9010

Mounting kit for smoke detectors and heat detectors with this magnetic adhesive system is easy, fast and clean installation of a smoke detector or heat detector without screws or drilling, especially for camping, boat or special ceilings (concrete,) everywhere mountable, without tools, fits almost all smoke detectors, Ø of mounting plate: 70 mm, Ø detector: 80 mm, mounting: support plate (without magnets): Remove the protective film, attach to the ceiling and press for at least 10 seconds, magnetic plate: Remove the protective film, attach to the smoke/heat detector and at least. Apply 10 seconds of light pressure, the smoke/heat detector with the magnetic plate is then attached to the carrier plate, assembly area: stable, dry, dust-free and greasy, Not for: vinyl wallpaper, polystyrene, non-stick and silicone coatings, installation requirements for smoke detectors according to Wds note, material: steel. Load capacity: 2.1 kg.

End sleeves Without plastic sleeve according to DIN 46228 Part 1. Surface: galvanized. Material: Copper. Rated cross-section: 95.0 mm2 sleeve length: 25 mm

DL AC 400 W, DC 250 W, electr. Characteristics according to DIN WDE 0636-3, gg - Full range protection for general use, cable and cable protection, max. AC 50ka, DC 8kA, Dimensions: Ø13, L=36 mm, E16, Ø Foot contacts: PSI DL 6A, PSI DL 10A: 8 mm, PSI DL 16A: 10 mm, PSI DL 20A: 12 mm Rated current: 6 A

For the time-saving laying of cables in pipe systems, Max. Tensile load capacity: 200kg, Material: twisted monofilament (breakproof,) Diameter: 4.5 mm, Band thread: M5 thereby compatible with the existing accessories of 3 mm and 4.5 mm glass fiber tape, Content: 1 Spring guide head 11 mm, 1x Tensile M5, 1x cable pull-in stock 6-9 mm, Dimensions box: 24x30x7 cm

For the time-saving laying of cables in pipe systems, Max. Tensile load capacity: 200kg, Material: twisted monofilament (break-proof,) Diameter: 4.5 mm, Band thread: M5 thereby compatible with the existing accessories of 3 mm and 4.5 mm glass fibre band, Content: 1 Spring guide head 11 mm, 1x Tensile M5, 1x cable pull-in stock 6-9 mm, Dimensions box: 24x30x7 cm

Tool bag Combination tool bag made of high-strength nylon, splash-proof floor, 90° foldable front pocket, 2 laterally placed pockets with Velcro closure, adjustable carrying strap, lined inner pocket for laptop and document compartment, with removable middle part, removable tool board with pockets, inner dimension: 440x320x180 mm, soak size: 450x340x200 mm. Charge: 12kg

Full rubber angle connector switch off Full rubber angle connector with ON/OFF switch 6 A, heavy industrial design, cable insertion max. 12 mm, rated voltage: AC 250 W, rated current: 16 A, design: DIN 49 441-2-AR2, contacts: Cuzn 37, note: 1-pole switching. Connection cable for H07RN-F max. 3g1.5mm2 Version: Angle plug Color: black Connection technology: Screw clamp Material: Full rubber Protection type (IP): IP44

DL AC 400 W, DC 250 W, electr. Characteristics according to DIN WDE 0636-3, gg - Full range protection for general use, cable and cable protection, max. AC 50ka, DC 8kA, Dimensions: Ø13, L=36 mm, E16, Ø Foot contacts: PSI DL 6A, PSI DL 10A: 8 mm, PSI DL 16A: 10 mm, PSI DL 20A: 12 mm Rated current: 20 A

TNDZ D-Safety Inserts 500 W, TNDZ träg, AC/DC 500W, electr. Characteristics according to DIN WDE 0635, träg/gG - Full range protection for general use, cable and cable protection, max. AC 4ka, DC 1.6kA, Dimensions: Ø13, L=50 mm, E16, Ø Foot contacts: PSI TNDZ 6A: 6.0 mm, PSI TNDZ 10A: 8.0 mm, PSI TNDZ 16A: 9.9 mm Rated current: 6 A