List of products by brand Protec

Fast connections of lines, connecting sleeve with clamping insert and cable screw connection, protection: IP68 (5 bar 30 min,). Condensation water formation possible. flame resistance according to EN 60695-2-11, material: polystyrene with flame protection/clamp insert: polyamide glass fiber reinforced, total length: 134 mm or 165 mm, key width SW1: 26 mm or 32 mm, key width SW2: 27 mm or 33 mm, collar diameter E1: 28 mm or. 33.5 mm, flange diameter E2: 29 mm or. 35.5 mm, clamping area (mm2): 5 x (1.5 - 2.5) or 5 x (1.5 - 6,). 10 mm - 18 mm, colour: grey, type of attachment: only for fixed installation in the cable duct or in the suspended ceilings, fixed installation, temperature resistance: -25°C to +60°C, short to approx. +80°C ladder cross section from/to: 1.5 - 2.5 mm2 cable up to: 5 x 2.5 mm2 number of conductors: 5

Fast connections of lines, connecting sleeve with clamping insert and cable screw connection, protection: IP68 (5 bar 30 min,). Condensation water formation possible. flame resistance according to EN 60695-2-11, material: polystyrene with flame protection/clamp insert: polyamide glass fiber reinforced, total length: 134 mm or 165 mm, key width SW1: 26 mm or 32 mm, key width SW2: 27 mm or 33 mm, collar diameter E1: 28 mm or. 33.5 mm, flange diameter E2: 29 mm or. 35.5 mm, clamping area (mm2): 5 x (1.5 - 2.5) or 5 x (1.5 - 6,). 10 mm - 18 mm, colour: grey, type of attachment: only for fixed installation in the cable duct or in the suspended ceilings, fixed installation, temperature resistance: -25°C to +60°C, short to approx. +80°C ladder cross-section from/to: 1.5 - 6 mm2 cable up to: 5 x 6 mm2 number of conductors: 5

For use in largely dry interiors, for galvanized steel pipes and copper pipes, tensioning band: W2A, tensioning part: strip steel, carrier part: galvanized, chromated for pipes Ø: 1/8 to 6 inch cross-section of the cable to be connected: 2.5 - 16 mm2 Number of conductors: 1 phase rails 240W For use in feeder circuits according to the invention. UL 508 Application only with UL 489 listed LS switches 1,- 2,- or 3-pin, 16 mm2 E314396 conditions of use on request. Number of phases: 3 Suitable for number of devices: 6 pitch: 17.8 mm cross-section: 16 mm2 length: 116 mm Electrical connection: Pin Insulated: Yes Suitable for N-wire devices: No Suitable for auxiliary switch devices: Yes

Heavy version with snap-in latch and cover, suitable for cable type H05RNH2-F 2x1.5 mm2, nominal voltage: AC 250 W, nominal current: 16 A, design: suitable for plug according to DIN 49 406-R, contacts: Cuzn 37, suitable for contour plug Art.-No. 05103994 Connection technology: screw-in clamp Colour: black Material: Full rubber Protection

Illu light chain For outdoor use, flat cable line green, protection: IP44, with screwed-on solid rubber contour plug, with screwed-on solid rubber end piece, sockets: E27, without lamps. For LED bulbs up to 6W Length m: 10 Number of sockets: 10

Illu light chain For outdoor use, flat cable line green, protection: IP44, with screwed-on solid rubber contour plug, with screwed-on solid rubber end piece, sockets: E27, without lamps. For LED bulbs up to 6W Length m: 10 Number of sockets: 15

Universal For lightweight concrete, masonry, poroton, hollow block and soft limestone (universal, color guidance system: silver,) laser welded segments, threading M16 for use in drill hammers with SDS-Plus / TE-C mount, adapter Konisch for use in drills with M18 x 2.5, large-volume ejection grooves for easy removal of the drill core can be provided! Please note: Can plugs are to be used without hammering when drilling! Ø: 68 mm working depth: 65 mm

For lightweight concrete, medium-hard brick wall, medium-hard lime sandstone (premium, colour guidance system: red,) laser welded segments, threading M16 for use in drill hammers with SDS-Plus / TE-C mount, adapter conical for use in drills with M18 x 2.5, large-volume ejection grooves for easy removal of the drill core can be significantly increased! Please note: Can plugs are to be used without hammering when drilling! Ø: 68 mm working depth: 65 mm

Scatter box with insulated core end sleeves Color identification according to DIN 46228 part 4, heat-resistant up to 105°C, halogen-free, insulation material: polypropylene. Design: Standard. Surface: galvanized. Isolated. Version: Scatter box 0.5 - 2.5 mm2. Material: Copper Fitted with: 50 pcs. 0.5 mm2 white, 100 pcs. 0.75 mm2 grey, 100 pcs. 1.0 mm2 red, 100 pcs. 1.5 mm2 black, 50 pcs. 2.5 mm blue

Scatter box with insulated core end sleeves Color identification according to DIN 46228, part 4, heat-resistant up to 105°C, halogen-free, insulation material: polypropylene, design: standard, surface: tinned. Isolated. Version: Scatter box 4.0 - 16 mm2. Material: Copper Fitted with: 50 pcs. 4.0 mm2 grey, 20 pcs. 6.0 mm2 yellow, 20 pcs. 10.0 mm2 red, 10 pcs. 16.0 mm2 blue

Neutral silicone Special crosslinking speed: 2.5-3 mm/ 24 hours, UV- and temperature-resistant: -50 °C to +150 °C, processing temperature: +5 °C to +40 °C, storage: cool, frost-free, original-closed, 12 months between +5 °C and +25 °C, basis: polysiloxanes, skin formation time: 15 - 20 minutes, content: 310 ml, free from elemental halogenod, chlorine. Color: transparent

Neutral silicone Special crosslinking speed: 2.5-3 mm/ 24 hours, UV- and temperature-resistant: -50 °C to +150 °C, processing temperature: +5 °C to +40 °C, storage: cool, frost-free, original-closed, 12 months between +5 °C and +25 °C, basis: polysiloxanes, skin formation time: 15 - 20 minutes, content: 310 ml, free from elemental halogenod, chlorine. Color: white