List of products by brand ABB

Small contactors B/BC 6 and B/BC 7 of 4 and 5.5 kw AC-3 (400 W) stand for a series with very small dimensions and with connection variants in screw, soldering and flat plug technology. As a result, and through a variety of contact and coil variants, a very wide range of applications is also available under unfavorable space conditions. With their AC or DC control, they switch power circuits with motors, slightly inductive or non-inductive loads. Attachable accessories are extinguishing elements as well as laterally or front-mounted 2-pin auxiliary switches.

The UK600 series electrical circuit distributors are designed for under-put assembly. They convince with many new and unique technical features. Thus, an up to 200 % larger connection space allows easy and efficient installation of the devices. The removable device carrier can be placed in the distributor according to requirements and thus also guarantees a simple installation. Clever details such as the cable entry sliders with integrated terminal receptacles and the variable use in scale or drywalls underline the high flexibility of the distributors. With an optional removable frame, the UK600 is turned to eye-catching and integrated into any environment. The distributions can be used in undercut and hollow wall mounting and have a WDE license plate. Applicable standards: DIN 43871, DIN EN 60670-24, WDE 0606-24

TF42 are economical, electromechanical motor protection devices for currents up to 38 A. In case of overload, they offer reliable thermal protection of the connected motors. TF42 are normally mounted on a contactor AF09 to AF38, but with the aid of a single setup set, the devices can also be mounted separately on DIN rails. When the motor current set at the current scale is exceeded, the relays disengage via bimetal elements and thus change the switching position of the two auxiliary contacts 1S/1Ö. An upstream contactor is thereby switched off. The relays allow manual or automatic resetting, they have test and stop function as well as a triggered display. The power scale of the devices is plombable. Accessories such as reset buttons and push buttons complement the range. TF42 have trigger class 10, are temperature-compensated and phase failure-sensitive and have an Atex approval.

TF42 are economical, electromechanical motor protection devices for currents up to 38 A. In case of overload, they offer reliable thermal protection of the connected motors. TF42 are normally mounted on a contactor AF09 to AF38, but with the aid of a single setup set, the devices can also be mounted separately on DIN rails. When the motor current set at the current scale is exceeded, the relays disengage via bimetal elements and thus change the switching position of the two auxiliary contacts 1S/1Ö. An upstream contactor is thereby switched off. The relays allow manual or automatic resetting, they have test and stop function as well as a triggered display. The power scale of the devices is plombable. Accessories such as reset buttons and push buttons complement the range. TF42 have trigger class 10, are temperature-compensated and phase failure-sensitive and have an Atex approval.

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

for monitoring the glass surfaces of windows, shop windows and doors, high interference safety, integrated storage display. For operation directly at alarm groups of intrusion alarm centers or safety terminals. Extremely small dimensions. Dimensions: H x B x T = 18 x 18 x 9 mm. Mounting takes place on glass with Loctite glue (LKS). With 5 m connection cable. VdS-Nr. G 194524. Wds Kl. B.

Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current circuit breakers ensure protection with sinusoidal alternating currents and pulsating currents with a smooth DC fault current proportion of up to 6 ma against ground. As well as fault protection (protection in indirect contact), additional protection (with I?n = 30 ma) and fire protection (with I?n = 300 ma). They meet product standards IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and F200 A to 100 A UL 1053. Areas of use are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the F200 fit for worldwide use.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

Protector AF09 to AF96 from 4 to 45 kw AC-3 (400 W) stand for the compact series with AC/DC control and very wide coil voltage ranges. Only 4 coils cover control voltages from 20...500 WDC to 24...500 VAC - without additional required extinguishing elements. They can therefore be used worldwide and only in low variance. They switch power circuits with motors, slightly inductive or non-inductive loads. Flexible exchangeable coil connection terminals allow the connection from above, from below or from above and below. Attachable accessories are 1- and 4-pole auxiliary switches that can be plugged on the front side and 2-pole auxiliary switches that can be mounted on the right and left side. A further auxiliary switch block with 1S+1Ö and coil connections A1 and A2 is available until AF65. All auxiliary contacts are designed as mirror contacts according to IEC60947-5-1 Annex L. Other accessories such as timepieces, wiring aids and locking members, among others, complement the range.

4-pole contactor ESB25..N with 36 mm width control 3-phase loads up to 25 A and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely bruised and quiet when switching. An auxiliary switch, which can be installed on the left side as an accessory, as well as plombier caps and a spacer supplement the range. ESB25..N have installation design and meet, among others, the EN61095 household standard, they are therefore particularly suitable for distribution installation.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.