List of products by brand OBO BETTERMANN

100 pieces 8X42 multi-purpose plugs 8x42mm, PA, grey-white, 9002 2347547Also suitable as cavity dowels, with collar against slipping. 3 applied fins take up the torque. Required minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5-fold

Leichter Wand- und Stielausleger mit angeschweißter Kopfplatte zur Befestigung an U-Stielen, Konstruktionen und an Wänden.

Protection class IP54, rated voltage 660 V, nominal cross-section 2.5 ÷ 4 or. 4 mm2 in combination with the clamping block 700/6 M, the box has the nominal cross section 4 mm2, 2 fastening holes for screws up to 5 mm Ø on the outside of the box. 4 cap screws, 7 breakable inserts with thread M20 x 1,5, preferably for cable fittings with short connection thread. Dimensions: 91 x 91 x 51mm lights internal dimensions: 80x80x39 by mm.

Adhesive clip, for clamping on the line

Fire galvanized flat round screw with square attachment including galvanized combination nut. For universal fastening of construction components. Use of the article only in dry atmospheres.

OBO Quick-Schell type 2955/...: for all metric steel armours, as well as light and heavy metric insulating tubes. Suitable for receiving the OBO Quick-Pipe.

OBO Quick-Schell type 2955/...: for all metric steel armours, as well as light and heavy metric insulating tubes. Suitable for receiving the OBO Quick-Pipe.

Steel hardened, galvanized and yellow passivated and hostaflon coated. Senkkopf with T-bit (inner hexagon), the size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25. The use of the SPRINT screws leads to considerably shortened screw-in times compared to conventional screws. This noticeable advantage is affected by the gripping tip with the 1st gear, which leads to the 2-speed thread. Applications: wood, chipboards, rigips plates, plastic dowels.

Protection class IP54, rated voltage 660 V, nominal cross section mm2, 2 fastening holes for screws up to 6 mm Ø on the outside of the box, 4 lid screws, 10 breakable inserts with thread M20 x 1,5, preferably for cable fittings with short connection thread. Dimensions: 136 x 111 x 57 mm lights internal dimensions: 125x100x44 by mm.

Corrosion-protection binders for covering surface and underground compounds. It consists of petrolatum-coated synthetic fibre fleece with a material thickness of about 1.1 mm. The anti-corrosion binding can be processed cold.

Overvoltage arresters type 2 for photovoltaic systems. Error-resistant Y-circuit for use according to VDE 0100-712 (IEC 60364-712). Overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). Discharge capacity up to 40 kA (8/20) per pole and low DC protection level:

The V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The SurgeController is particularly suitable for potential equalization in main and lower distributions, depending on the type in the area of TN networks. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.