List of products by brand OBO BETTERMANN

Channel bottom with bottom hole for direct wall mounting. The top is to be ordered separately.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall. Each delivery length includes 4 upper clamps.

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 7 x M25 5 x M32 seals, or the seals were cut in with a knife at the intended locations to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 176x135x67 Cover with labeling field and sealable.

potential compensation rail for potential compensation according to DIN VDE 0100-410/-540 as well as lightning potential compensation according to DIN VDE 0185-305. Base plate and cover made of polystyrene, grey, cover hood plombable / inscribable, contact strip made of brass, nickel-plated, steel screws and cantilever, galvanically galvanized, flash current-bearing 50 kA (10/350). Connection options: 7x single- or multi-wire lines up to 25 mm2 or fine-wire lines up to 16 mm2, 1x round conductor Rd 8-10, 1x flat band to FL30 or round conductor Rd 8-10.

The T-series cable branch boxes are all UV-resistant. They consist of a thermoplastic polypropylene with plug-in seals of ethylene vinyl acetate EVA. This plastic is soft, that is, it can move. Thus, lines through the 7×M25 seals can be installed or the seals are cut in with a knife at the intended points in order to produce an insertion opening for lines or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5 x 9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 77x77x46 mm

Cable branch box with clamping cover for indoor and outdoor areas. The screwless, fixed clamping cover allows quick and secure mounting.

SurgeController upper part VDE-tested, plug-in upper part, upper part without tool to separate from the lower part, including thermal and dynamic, severing device and optical defect display, high current conductivity with long service life