List of products by brand Metz Connect

Connection unit for individual modules in modular design // Plug direction of module 45° inclined downward // Load relief at module // without cover parts // compatible with design central pieces of switch programs (Achtung 3 Port central pieces currently only available from JUNG) // Variants: 1 /3 Port, 2 PortProduct description on the Manufacturer page

19 inch 1HE module carrier for 24 individual modules in modular design // module carrier front made of silver anodized aluminum // module holder made of plastic with dust protection flaps (further colors available as accessories) removable forward // integrated cable collection, additional strain relief possible // window for enclosed labeling insert // labeling sheet 210 x 297 mm see accessories // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

19 Inch 1HE Module support with 24 E-DAT modules // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA 210 x 297 mm see accessories // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

19 inch 1HE stainless steel module carrier for 24 individual modules in modular design // additional strain relief on the patch panel possible // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules are connected via the stainless steel module carrierProduct description on the Manufacturer page

80W stainless steel module support with 24E-DAT modules // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

RJ45 Connection unit E-DAT module in flange housing according to ISO/IEC 24702 and IEC 61076-3-106 Var. 6 // Cat.6A component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011Product description on the Manufacturer page

R & D & D & D The module is protected from direct contact by a cover. During assembly in protective-insulated distributors, protection class II thus remains. For this purpose, the potential compensation spring must be removed. // Integrated dust protection flap (also available in colour)Product description on the Manufacturer page

IP44 splash housing for two individual modules in modular design // IP44 protection only in closed state (without plugged patch cable) // cable feed for one or two cables from above // break-proof // colour greyProduct description on the Manufacturer page

RJ45 Cable coupling Cat.6 class EA // Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus UPoE) and HDBaseT suitable // full shielded 180° coupling made of zinc die castingProduct description on the Manufacturer page

RJ45 Cable Clutch Cat.6 Class EA // Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 // for 10GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT suitable // full shielded 90° coupling made of zinc die castingProduct description on the Manufacturer page

UP/1180/EN/CProduct description on the Manufacturer page