List of products by brand Berker

High definition socket Berker S.1/B.3/B.7 polar white, mattHigh definition socket (HDMI) Berker S.1/B.3/B.7 polar white, matt video bandwidth max. 165 MHz resolution max. 1080p (1920 x 1080 px) frequency range (vertical) 50 - 85 Hz transmission rate max. 8,16 GBit/s For the connection of digital devices for the transmission of high-resolution audio and video signals, for example from an SAT receiver, DVD or BD player to a display device, such as LCD or plasma screen. Notices from cable and device manufacturers for maximum HDMI cable length! - Gold-plated contacts - without spreader claws - with HDMI double jack type A, supports HDMI technology (V 1.3 with Deep Color)

High definition socket with 90° socket Berker S.1/B.3/B.7 polar white, mHigh definition socket (HDMI) with 90° connector Berker S.1/B.3/B.7 polar white, matt video bandwidth max. 165 MHz resolution max. 1080p (1920 x 1080 px) frequency range (vertical) 50 - 85 Hz transmission rate max. 8,16 GBit/s For the connection of digital devices for the transmission of high-resolution audio and video signals, for example from an SAT receiver, DVD or BD player to a display device, such as LCD or plasma screen. Note information from cable and device manufacturers for maximum HDMI cable length! - Gold-plated contacts - without spreader claws - 90° angled rear bushing - with HDMI double bushing type A, supports HDMI technology (V 1.3 with Deep Color) of signal transmission) in connection cable. Recommended installation in Electronic-Dose from the company. Kaiser

3 x Cinch/S video socket Berker S.1/B.3/B.7 polar white, glossyFrequency range Audio 20 ... 20 KHz, frequency range Video max. 160 MHz, gilded contacts, without spreader claws

Power supply with frame Berker S.1 polar white, mattPower supply with frame Berker S.1 polar white, matt 100 - 240 V~, 50 - 60 Hz output voltage 24 V= output current 250 mA input current max. 180 mA operating temperature -5 - +40 °C Approval according to EN 60335, EN 60950 For installation in commercial built-in cans according to DIN 49073-1 IP40 (contact protection from 1mm, no water protection). For the voltage supply of the emergency call system components with 24 V=. - central piece connector - suitable for multiple combinations - with screw terminals

Power supply with frame Berker S.1 polar white, glossyPower supply with frame Berker S.1 polar white, glossy 100 - 240 V~, 50 - 60 Hz output voltage 24 V= output current 250 mA input current max. 180 mA operating temperature -5 - +40 °C Approval according to EN 60335, EN 60950 For installation in commercial built-in cans according to DIN 49073-1 IP40 (contact protection from 1mm, no water protection). For the voltage supply of the emergency call system components with 24 V=. - central piece connector - suitable for multiple combinations - with screw terminals

socket SCHUKO with control LED and labeling field Berker S.1 / B.3 / B.7 polarsocket SCHUKO with control LED and labeling field Berker S.1/B.3/B.7 polar white, matt increased contact protection VDE 0620-1 16 A, 250 V~ power consumption approx. 0.275 W Connection clamps according to IEC 60884-1 Connection clamps according to VDE 0620-1 Designed according to DIN 49440 Labeling field height for P-touch band 6 mm. - with screw-lift clamps

Connection terminals: according to VDE 0620-1Type of construction: according to DIN 49440Rated voltage: 250 V ACRated current: 16 ALabeling fieldincreased contact protectionwith screw-release clampsLabeling field height for P-touch band 6 mm.polar white glossy

socket SCHUKO with FI protection switch Berker S.1/B.3/B.7 polar white, mattsocket SCHUKO with FI protection switch Berker S.1/B.3/B.7 polar white, matt - with increased contact protection VDE 0620-1 16 A, 250 V~, 50/60 Hz Rated fault current 30 mA Trigger time = 30 ms Short-circuit strength 3 kA (for pre-locking 20 AgL) Impact resistance 250 A (8/20) μs Suitable for use according to DIN VDE 0100-410 Tested according to VDE 06648. - for the protection of plugged and downstream consumers - type A for alternating and pulsating direct currents - with plug-in terminals

Rated voltage: 250 V ACFrequency: 50/60 HzRated current: 16 AMeasurement error current: 30 mATrigger time: ≤ 30 msShort-circuit strength (for pre-securing 20 AgL): 3 kAImpact current strength: 250 A (8/20) μsType of construction: according to DIN 49440Connection terminals: according to VDE 0620-1Tested according to VDE 0664 (EN 61008)increased contact protectionto protect inserted and downstream consumersType A for alternating and pulsating direct currentswith connectorsBY S.1/B.3/B.7polar white glossyFor use in old plants with stock protection without additional protection requirements.Wired sockets are also protected.

Central piece with dust protection slides and labeling field Berker B.3 / B.7 anthrCentral piece with dust protection slides and labeling field Berker B.3/B.7 anthracite, matt - for support plates with colored receptacles 2x Designed for support plate 2x labeling field height for P-touch band 6 mm.

Rocket with red lens and imprint Heating Emergency switch" Berker S.1/B.3/B.7 red,"Rocket with red lens and imprint Heating Emergency switch Berker S.1/B.3/B.7 red, matt - for windshield switch off/exchange, cross - for windshield - for control circuit - for pushbutton-BA 1x and group push button-BA 1x or glass pane-protected heater emergency switches from the Arsys, wg Up IP44, Aquatec IP44 programs. Not suitable for heating systems > 50 kW.

socket Berker S.1/B.3/B.7 red,mattsocket Berker S.1/B.3/B.7 red, matt 16 A, 250 V~ connection terminals according to VDE 0620-1 connection terminals according to IEC 60884-1 design according to DIN 49440 , with plug-in terminals.