The V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The SurgeController is particularly suitable for potential equalization in main and lower distributions, depending on the type in the area of TN networks. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.
Protection class IP54, rated voltage 660 V, nominal cross section mm2, 2 fastening holes for screws up to 6 mm Ø on the outside of the box, 4 lid screws, 10 breakable inserts with thread M20 x 1,5, preferably for cable fittings with short connection thread. Dimensions: 136 x 111 x 57 mm lights internal dimensions: 125x100x44 by mm.
The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 16 x M32 8 x M40 seals, or the seals were cut in with a knife at the intended locations to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 267x182x110 Cover with labeling field and sealable.
SurgeController upper part VDE-tested, plug-in upper part, upper part without tool to separate from the lower part, including thermal and dynamic, severing device and optical defect display, high current conductivity with long service life
20 piecesGrid trough corner connector for creating grid trough arch elements of individual size on site, including flat round screw and combination nut.
Screwless clamp for connecting conductors, tested according to EN 60998. The conductor type can optionally be flexible, polygonal or rigid. When using rigid conductors, it is not necessary to open the release lever. The conductor can be inserted directly into the terminal. To hoist the conductors simply open the release lever. The vein can be pulled out easily. The stripping length is 9 mm (+1 mm). The test opening is located on the upper side of the clamp, thereby having a very good access with the phase tester and test pin (max. Ø 2 mm). The maximum permissible ambient temperature according to EN 60998 is 85°C.
200 pieces steel hardened, galvanized and yellow passivated and hostaflon coated. Senkkopf with cross slot (Pozidrive Gr. 2 except Ø 6 mm Pozidrive Gr. 3). The use of the SPRINT screws leads to considerably shortened screw-in times compared to conventional screws. This appreciable advantage is affected by the gripping tip with the 1st gear, which leads to the 2 running thread. Applications: wood, chipboards, rigips plates, plastic dowels.
bumper connectors for gratings in screwed design, for straight connections of grating channels and for the production of molded parts, inclusive flat round screw FRS M6 x 20 with combination nut.
potential compensation rail according to VDE 0618, part 1 suitable for potential compensation according to DIN VDE 0100-410/-540 and flash protection potential compensation according to DIN VDE 0185-305. The clamping rail 10 x 10 mm consists of nickel-plated brass, the contact-proof terminal blocks made of galvanically galvanized steel, the cover hood and the rail blocks made of gray polystyrene. The cover hood is plombable / inscribable. The potential compensating rail is capable of energizing up to 100 kA (10/350) and has a tie bar with screw securing against self-lockers (e.g. required in industry and ex areas). Connection options: 7 single- or multi-wire lines 2.5-25 mm2 or fine-wire lines up to 16 mm2 (max. Ø 7 mm), 2 single or multi-wire lines 25-95 mm2 or fine-wire lines up to 70 mm2 (max. Ø 13.5 mm) and 1 flat conductor 30 x 35 mm.
The upper part of the V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44) and serves as a substitute for the V20 SurgeController. A dynamic separation device as well as an optical status display characterize the modularly pluggable arresters. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.
€55.96
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.