Tool and accessories

Connecting sleeve connecting sleeves for cable draw-in systems. Suitable for PK67xxE. For Ø6,7 mm glass fiber profile.

Suitable for cable draw-in systems and PSCH push rod set. PA67-8B with pull eye Ø11 and female thread M8, dimension Ø18 mm, length 55 mm Version: For PK6760E / PK6780E / PK67100E diameter (mm): 6.7

WDE cable scissors VDE-tested according to DIN-EN 60900 / WDE 0682 part 201, With anti-slip, tested for 1000 volts, 2-K handle for optimal grip, surface polished, covered with transparent clear lacquer, ergonomically bent pliers head (25° cranked) and lever-optimized force joint for best force transmission Version: screwed cutting area max.: 70mm2 Length: 220 mm

WDE 3-in-1 piece tested protective insulation 1,000 W AC, WDE- and GS-tested. Manufactured according to IEC 60900:2012. With three processing stations: cutting, covering, stripping. Ergonomic and power-saving sheathing and stripping in the longitudinal direction of the cable and the pliers, by specially cranked head. Side cutters for cutting soft and hard wires but also cables such as NYM lines 3x1,52 - 5x2,52. High quality C70 tool steel, hardened to approx. 64 HRC Length: 170 mm

Can counter Xpress with suction For hard concrete products and highly compacted lime sandstone (quadroblock) etc. (Xpress, color guide system: black,) radius slots in the cover for dust extraction, laser welded segments, thread mount M16 for use in drill hammers with SDS-Plus / TE-C mount, Note: By selecting the right drill bit to the existing material, the service life of the diamond segments can be significantly increased! Please note: Can plugs are to be used without hammering when drilling! Ø: 68 mm Working depth: 65 mm Suitable for use with impact: No With centering drill: No

Can counter Xpress with suction For hard concrete products and highly compacted lime sandstone (quadroblock) etc. (Xpress, color guide system: black,) radius slots in the cover for dust extraction, laser welded segments, thread mount M16 for use in drill hammers with SDS-Plus / TE-C mount, Note: By selecting the right drill bit to the existing material, the service life of the diamond segments can be significantly increased! Please note: Can plugs are to be used without hammering when drilling! Ø: 82 mm Working depth: 65 mm Suitable for use with impact: No With centering drill: No

Cable pull stockings for cable pull-in systems Master Suitable for Pkxxe breakage load: 22.6 kn Installation tension: 11.3 kn For cable diameter from/to: 20 - 30 mm

Cable pull stockings for cable pull-in systems Master Suitable for Pkxxe breaking load: 37.0 kn Installation tension: 18.5 kn For cable diameter from/to: 30 - 40 mm

Cable pull stockings for cable pull-in systems Master Suitable for Pkxxe breaking load: 55.0 kn Installation tension: 27.5 kn For cable diameter from/to: 40 - 50 mm

Cable pull stockings for cable pull-in systems Master Suitable for Pkxxe breaking load: 55.0 kn Installation tension: 27.5 kn For cable diameter from/to: 50 - 65 mm

Water pump pliers 30% enlarged gripping area. Self-clamping significantly improved by optimized jaw design. Refined grading of the Quick-Snap ratchet principle improves ergonomics through optimal leg position. Newly developed spring-driven sliding block ensures faster engagement. Countless teeth in the rear jaw area for aggressive packing. Surface polished. Microstructured surface. Clear lacquered. Handles dipped length: 180 mm span: 42 mm pipe-Ø: 1.5 inches

Water pump pliers 30% enlarged gripping area. Self-clamping significantly improved by optimized jaw design. Refined grading of the Quick-Snap ratchet principle improves ergonomics through optimal leg position. Newly developed spring-driven sliding block ensures faster engagement. Countless teeth in the rear jaw area for aggressive packing. Surface polished. Microstructured surface. Clear lacquered. Handles dipped-coated Length: 250 mm Clamp width: 50 mm Pipe-Ø: 2 inches