Tool and accessories

Meißel SDS-Max Specially hardened steel for optimal service life, wear minimization reduced notch sensitivity, increased surface hardness and fatigue strength cutting width: 25 mm cutting shape: flat chisel length: 400 mm

Hole saw made of bi-metal Coated bi-metal (HS-Co8), flexible, laser-welded connection of alloyed spring steel in the back of the leaf and high-performance quick steel in the toothed cutting area, Vario toothing with 4 and 6 teeth per inch, solid back cover for high smoothness and even, fast cut, precise holes for inlet cans, thread, cable and pipe bushings with Ø from 19 to 92 mm

Hole saw made of bi-metal Coated bi-metal (HS-Co8), flexible, laser-welded connection of alloyed spring steel in the back of the leaf and high-performance quick steel in the toothed cutting area, vario toothing with 4 and 6 teeth per inch, solid back cover for high smoothness and even, fast cut, precise holes for inlet cans, thread, cable and pipe bushings with Ø from 19 to 92 mm

Thread drill box tap drill cartridge 15-part, high quality HSS (DMO5) - steel, hardness at the cutting part = up to d1 = 3.0 mm min. 61 HRC. 3.0 to 6.0 mm at least 62 HRC. About 6.0 mm 63 HRC / hardness on the shaft min. 45 HRC.Gewind: metric DIN ISO 13. Cutting direction: right-hand cutting. Contents: (thickness - incline mm - thread hole - total length - thread length): M 3 - 0.50 - 2.50 - 40 - 10 M 4 - 0.70 - 3.30 - 45 - 12 M 5 - 0.80 - 4.20 - 50 - 13 M 6 - 1.00 - 5,00 - 50 - 15 M 8 - 1.25 - 6.80 - 5650

Combination scissors For exact right-angle cutting of composite and plastic pipes in a Ø 12 to 25 mm, cutting of corrugation protection pipe on the outside diameter, without damage to the inner pipe, clean, smooth and burr-free cutting surfaces, easy cutting of the protective pipe even in the assembly state by short cutting paths (90°), possibility for attaching a calibrating mandrel, e.g

Combination shears For exact right-angle cutting of composite and plastic pipes in a Ø 12 to 25 mm, cutting of corrugation protection pipe on the outside diameter, without damage to the inner pipe, clean, smooth and burr-free cutting surfaces, easy cutting of the protective pipe even in the assembly state by short cutting paths (90°), possibility for attaching a calibrating mandrel, e.g. for Geberit pipes Ø 11.5 and 15 mm

Meißel SDS-Max Specially hardened steel for optimal service life, wear minimization reduced notch sensitivity, increased surface hardness and fatigue strength cutting width: 50 mm cutting shape: spatmeißel Length: 400 mm

Paint marker white lacquer marker white. Waterproof: Yes Thickness: 0.8 mm

Paint marker white lacquer marker white. Waterproof: Yes Thickness: 2 mm

Euro tester According to DIN WDE 0680 part 6:1977-04, single-pin voltage test up to 250 W, color: blue, material blade: tool steel, C 60, continuous hardened, glossy nickel-plated, material grip: ABS Dimension: 150 mm Insulated: Yes

Europrüfer According to DIN WDE 0680 part 6:1977-04, single-pin voltage test up to 250 W, color: blue, material blade: tool steel, C 60, continuous hardened, gloss nickel-plated, material grip: ABS Dimension: 190 mm Insulated: Yes

4-Schneider-Sparpack SDS-Plus Information about the 4-Schneider hammer drills see PHABO44N 4-Schneider hammer drill SDS-Plus, 10 pack recording system: SDS-plus diameter: 6 mm cutting length: 50 mm Total length: 110 mm