Muff technology

Non-uniform connection and/or branching sleeve, depending on the clamping type for connections and individual branches of plastic cables and lines from PWTSC, PE, EPR and WPE (for example, N(A)YY, NYM, H05) the gel in the shell takes over insulation and sealing of the connection, tested according to DIN EN 5011)393 (corresponding to type 0239). L x B x H: 180 x 69 x 40 mm Cable diameter Main cable: 9 - 22 mm L cross section Main cable: 3x6 - 5x16 mm2

Incl. Suitable for copper and aluminum conductors, application areas: interior, open air, soil, water and installation equipment etc. Longitudinal and crosswater sealing, good mechanical strength, high-quality transparent, impact-resistant plastic mould shells, immediately ready to use, without cable connectors. Curing time: about 24 hours depending on the outside temperature. Power supply can be switched on immediately after installation of the socket (not to be taken into account). Cable up to mm2: 4 x 25 cable Ø: 14 - 34 mm casting resin: 370 ml

Hot-shrink connection fittings 0,6/1 kw (1,2kV) For 4- and 5-core plastic-insulated cables, made of high-quality crosslinked polyofin, shrinkage rate 4:1, continuous use temperature -40°C to +120°C, non-corrosive and cadmium-free, color: black, delivery length: 400 mm cable up to mm2: 5 x 6/5 x 25 sleeve length: 500 mm

0,6/1 kw (1,2kV) For 4- and 5-core plastic-insulated cables, made of high-quality crosslinked polyofin, shrinkage rate 4:1, continuous use temperature -40°C to +120°C, non-corrosive and cadmium-free, color: black, delivery length: 400 mm cable up to mm2: 4 x 16/4 x 50 sleeve length: 600 mm

Gas and longitudinal water resistant to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 8 - 14 mm Length: 800 mm Minimum diameter Wall breakage: 40 mm Colour: black

Gas and longitudinal water-tight to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 12 - 26 mm Length: 800 mm Minimum diameter Wall breakage: 55 mm Colour: black

Gas and longitudinal water-tight to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 15 - 41 mm Length: 800 mm Minimum diameter Wall breakage: 70 mm Colour: black

Shrink hoses, medium-walled With adhesive inner coating, shrinkage rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm Colour: black Length: 1 m Operating temperature range: -40 - 120 °C With internal adhesive: Yes Shrink rate: 3:1 Shrinkage strength: 34 - 7 mm

Replacement casting resin EG is suitable for the following types of cables: plastic and paper-insulated low-voltage cables up to 1kw. Plastic and paper-insulated telecommunication and message cables. medium-voltage cable as mechanical protection and moisture protection, replacement casting resin for PGM casting resin sleeves, content: 286 ml, 2-component PUR casting resin, in the practical two-chamber mixing bag, good flow behavior. Curing time: about 24 hours depending on the outside temperature. Halogen-free: Yes

Shrink hoses, thin-walled free of lead and cadmium, roll goods in dispenser box, thin-walled, without thermoplastic adhesive, labelable, resistant to chemical influences, resistant to UV radiation, free of paint wetting disrupting substances, non-corrosive, unmeltable, high tensile strength, high cold flexibility, cold flux resistant (heat-shape stable,) High flexibility, halogen-free

Shrink hoses, thin-walled free of lead and cadmium, roll goods in dispenser box, thin-walled, without thermoplastic adhesive, labelable, resistant to chemical influences, resistant to UV radiation, free of paint wetting disruptive substances, non-corrosive, unmeltable, high tensile strength, high cold flexibility, cold flux resistant (heat-shape stable,) High flexibility, halogen-free

Thickness of material: 30 mm