Fastening material

Clamps Colorful Screwless Clamps, Material: Plastic, Material of Current Parts / Surface Protection: Brass Galvanized/Steel Spring, Conductor Type: Restricted, Housing: Transparent, Stripping Length: 11 mm, Ambient Temperature max: 60°C, Self-Deleted with Test Slot according to UL 94V-2 Number of Clamps: 4 Colour: Red Nominal Diameter: 0.5 - 2.5 mm2

Clamps Colorful Screwless Clamps, Material: Plastic, Material of Current Parts / Surface Protection: Brass Galvanized/Steel Spring, Conductor Type: Restricted, Housing: Transparent, Stripping Length: 11 mm, Ambient Temperature max: 60°C, Self-Deleted with Test Slot according to UL 94V-2 Number of Clamping points: 5 Colour: Yellow Rated cross-section from/to: 0.5 - 2.5 mm2

Light clamp application for combination of rigid and flexible conductors. Max. ambient temperature: T100. Self-extinguishing according to UL 94V-2. With test slot. Page with release pusher 0.5°2.5 mm2. Side without release pusher 0.752.5 mm2. Number of clamping points: 1 Colour: grey Rated voltage: 450 W Rated current: 24 A Suitable for solid conductors: Yes Suitable for flexible conductors: Yes

Suitable for: C20/25 to C50/60. For fastening: pipe and ventilation lines, brackets, ladders, cable trays, suspended ceilings, steel structures such as grids or formwork supports. Fast mounting with high holding force. Low drilling effort and easy impact with the hammer or machine. Metric internal thread for the use of commercially available screws and threaded rods. For use as multiple fastening of non-supporting systems in concrete. Length: 30 mm Thread: M8 Hole-Ø: 10 mm

For use in almost all building materials, especially for fastening objects to plates and boards. For fastening any objects that can be fastened with wood and chipboard screws. Optimum suitability for simple and double-planned plasterboard walls. Locking edges guarantee good safety against rotation. Collar prevents slipping into the bore. Dowel length: 50 mm Version: Without screw Hole diameter: 10 mm

For use in almost all building materials, especially for fastening objects to plates and boards. For fastening any objects that can be fastened with wood and chipboard screws. Optimum suitability for simple and double-planned plasterboard walls. Locking edges guarantee good safety against rotation. Collar prevents slipping into the bore. Dowel length: 50 mm Version: With screw Hole diameter: 10 mm

Lower head screws with PZ drive Drive: Cross slot - Pozidrive (PZD,) Version available in full and partial thread, Surface: galvanically galvanized Length: 60 mm Thread diameter: 4.5 mm Version: PZD 2, Part thread

Lower head screws with PZ drive Drive: Cross slot - Pozidrive (PZD,) Version available in full and partial thread, Surface: galvanically galvanized Length: 50 mm Thread diameter: 5.0 mm Version: PZD 2, Part thread

Lower head screws with PZ drive Drive: Cross slot - Pozidrive (PZD,) Version available in full and partial thread, Surface: Galvanized Length: 30 mm Thread diameter: 3.5 mm

Ceiling nail Suitable for: concrete. For fastening: cantilever, strips, metal profiles, wire suspensions, chains, ropes, perforated belts, ventilation lines, wooden and metal substructures, ceiling clothing. Fast to mount ceiling fastening with high holding force. Low drilling effort and easy impact with the hammer tested. European technical approval (ETA-06/0259) for use as multiple fastening of non-supporting systems in concrete. MVE: 100 pieces fastening thickness: 5 mm anchoring depth: 32 mm drill depth: 40 mm drill hole diameter: 6 mm

Suitable for: concrete, solid stones, pore concrete, limited for perforated stones and hollow blocks. For fastening objects which can be fastened with wood and chipboard screws. Optimal screw guidance through rib-shaped inner geometry. Fireproof pipe fitting according to technical guidelines for gas pipe installation (TRGI 3.3.7.2.). In the case of pore concrete P2 and P4, the dowel can be tapped without pre-drilling (restriction PMUD 10 drill Ø 6 at P2 or. Ø 8 at P4) Dowel-Ø: 8 mm Length: 38 mm Hole depth: 50 mm

Suitable for: concrete, solid stones, pore concrete, limited for perforated stones and hollow blocks. For fastening objects which can be fastened with wood and chipboard screws. Optimal screw guidance through rib-shaped inner geometry. Fireproof pipe fitting according to technical guidelines for gas pipe installation (TRGI 3.3.7.2.). In the case of pore concrete P2 and P4, the dowel can be tapped without pre-drilling (restriction PMUD 10 drill Ø 6 at P2 or. Ø 8 at P4) Dowel-Ø: 8 mm Length: 60 mm Hole depth: 70 mm