2-7 days
Branch boxes, with clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV resistant type 308, 407 and 607 integrated thread (no counter nut required). Type 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids, seawater. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: Through 4 internal openings outside the sealing area or with type 308 and 407 with quick mounting bracket. 4 unreleasable lid screws. Screw clamps 5-pin. Type 308: Clamp 2.5 mm2, cable insert 8 side, membrane insert, 400 W Type 407: Clamp 4.0 mm2, cable insert 7 side +2 in the bottom, membrane insert, 690 W Type 607: Clamp 6 mm2, cable insert 7 side +3 in the bottom, membrane insert, 690 W Type 1010: Clamp 10mm2, cable insert 10 side +2 in the bottom, with gasket, 690 W14. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 95x95x60 mm For cable Ø: 3-12 mm / M20 Max. Conductor cross section: 4.0 mm2
