Sale

Delta Line, titan white Rahmen 2-FACH, 151X80MM

Plug-in for PLS., CLS., PKN., PFIM, PFHM, (with auxiliary switch), any switchgear combinations with or without auxiliary switch possible, only a few components, 2 angle types per rail cross-section for three-phase displacement, common cover profile with end caps for ZV-SS etc. ZV-SS-80AShort-circuit and insulation resistance tested according to IEC/EN 60439-1Measurement current In A: 50Version: flatGalvanized: NoLength mm: 1000Width mm: 8Height mm: 2Flexible: no

Rapid16 30 - 40, black anodized, with grounding pin, mounting type horizontal/vertical, clamping length 50 mm

Verbindungsklemmen nach VDE 0620-1Bauart nach DIN 49440Nennspannung 250 V ACNennstrom 16 A mit Steckklemmenpolarweiß glänzend

Circuit breaker 1polig+N 6kA C-Characteristic 13A 2 Modules Circuit breaker according to DIN VDE 0641 part 11/8.92 , contact protection IP2x according to DIN VDE 0106 part 100 with VDE characters. LS with time-delayed thermal exhaust for overload protection and electromagnetic exhaust for short-circuit protection. Suitable for retrofit installation of additional equipment. Possibility of marking directly on the device and individual removal from the phase rail composite by unlocking the quick attachment of the hat rails. Rated current: 13 ATrigger characteristic: CNominal shutdown capacity: 6 kANumber of poles: 2 PNumber of modules: 2AC voltage: 230/400 VInsulation voltage: 500 VFrequency: 50/60 HzConnection type: screw technologyTorque: 2,8NmTotal loss power at rated current: 4.2 WDevice life, electrical switching games: 4000Machine life mechanical switching games: 20000Operating temperature: -25 to 60 °CStorage temperature: -25 to 80 °CHeight installed product: 83 mmWide installed product: 35 mmDeep installed product: 70 mm

Schletter 129011-000 plastic end cap for Solo05/Profi05

FI-Schutzschalter, 4-polig, Typ A, kurzzeitverzögert, In: 40 A, 30 mA, Un AC: 400 V, mit thermischem Überlastschutz

FI switch 4pin 6kA 40A 30mA type G/A rated current pre-sureableRated current: 40 ANumber of poles: 4 PSensitivity: 30 mAType of differential protection: A GImpact strength: 4 kVNumber of modules: 4AC voltage: 230/400 VInsulation voltage: 500 VFrequency: 50 HzTorque: 2,8NmConnection type: screw technologyTotal loss power at rated current: 6.5 WDevice life, electrical switching games: 2000Machine life mechanical switching games: 4000Connection cross-section with flexible conductor: 16mm2Connection cross section for rigid conductor: 25mm2Operating temperature: -25 to 40 °CStorage temperature: -55 to 70 °CHeight installed product: 83 mmWide installed product: 70 mmDeep installed product: 70 mm

NETZ-0-NOTSTROM Switch, 4 pole, RE, Ith: 63 A, P: 22 kW(AC-23,400V), wire cross section 25 mm2 FOLLOWING TYPE KA63B.K950.VE2.F437 70024348

4x screened, meter print on the cable, perfectly protected against heat, cold and rain

Screen size: 120 dB
Shield: 4-fold
Outer diameter: 7.2 mm
External conductor diameter: 6.0 mm
Insulation diameter: 4.8 mm
Internal conductor diameter: 1.1 mm CCS
Aluminium foil: 2x laminated
Brake: 2x 64 x 0,12 al
Impedance: 75 Ω
Fire protection class: Eca
Hazardous substances: no
TÜV tested
ISO 9001
RoHS-conform
Meter imprint on the cable
Cable length: 100 m / 500 m

Attenuation at 20° C. to 100 m

at 800 MHz: 17 dB
at 2150 MHz: 29 dB

Backflow damping

800 MHz: > 26 dB
for 2150 MHz: > 23 dB

Logistic data
100 meter coil:

Length: 275 mm
Width: 275 mm
Height: 110 mm
Weight: 4 kg

grounding and lightning protection terminal VA M8, clamping region Rd 8-10 mm, connection single/multi-wire 4 - 50 mm2LxBxH: 37 x 32 x 66 mm.

RAPID 16 THE NEW KLEMMENFAMILIE The Schletter module terminal family Rapid16 offers many advantages, such as e.g. better storage by minimal variants and the grounding pin in each module clamp. Rapid16 is designed for all Schletter module support profiles with 8 mm click groove and for module frame heights of 30 - 50 mm. • Minimum variants for all applications • Integrated grounding pin • Optimum storage and fast installation • General structural approval Z14.4-631 • 10 years warranty The clamping area is divided into 2 sizes. The low module terminals can clamp modules with a frame height of 30-40 mm. The higher ones are suitable for frame heights of 40-50 mm. In all center terminals and in the case of the high end terminals, the claws can be rotated and are therefore suitable for vertical and horizontal (linear) module clamping. Exceptions are the end terminals for low module frames. For geometric reasons, rotation is not possible here. Therefore, there is the low end clamp also in the variant “H”. All clamps are also available in black anodized to match these optically to black module frames.