Schneider

Error current circuit breaker ID K, 4P, 63A, 30mA, type A. Series: Acti 9 - Product or component type: Earth circuit protection - Short description of the device: ID K - Description of the pole: 4P - Neutral position: left - Network type: AC - Nominal substrate. Idm 500 A, In 500 A - Bed. Measured short-circuit current: with gL63 : Inc 4.5 kA, with K60 : Inc 6 kA.

AMIGO small distributor, 4-row, UP. Product or component type: Cabinet - Width: 330 mm niche, 344 mm frame - Height: 749 mm frame, 710 mm niche - depth: 11 mm frame, 90 mm niche - delivered equipment: Clamping bar (3), type label (1), gypsum board mounting kit (1). Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.

Error current circuit breaker ID K, 4P, 40A, 30mA, type A. Series: Acti 9 - Product or component type: Earth circuit protection - Short description of the device: ID K - Description of the pole: 4P - Neutral position: left - Network type: AC - Nominal substrate. Idm 500 A, In 500 A - Bed. Measured short-circuit current: with gL63 : Inc 4.5 kA, with K60 : Inc 6 kA.

AMIGO small distributor, 3-row, HW. Product or component type: Cabinet - Width: 310 mm Breakouts, 344 mm frame - Height: 570 mm Breakouts, 624 mm frame - depth: 88 mm Breakouts, 11 mm frame - delivered equipment: Clamping bar (3), gypsum board mounting kit (1), label (1). Your benefit:Available in four versions and as a multimedia distributorEasy mountingStable and break resistantSpacious wiring roomsAlongside each other can be arranged flushPrecious line introduction slidersLockable and fast mountable clampsExtendable hat rail from 12 to 14 TEFunctional contact protection coverPreliminaries for cableSpacers available for cleaningFrame horizontal alignmentDoor with elegant snap closureLock interchangeableMobile LibellaSimple door stop change left or rightStorage-friendly cardboard with integrated cleaning protection
.. Applications:HousingConstructionLow-voltage switchgear
.. Your benefit: solution, through 50 years of experience of Schneider Electric and ABN is supported in the development and production of electrical protection devices, measurement and distribution systems Schneider Electric Equipment according to EN 61439-3.. Applications: indoor and outdoor facilitiesElectrical distribution, measurement and multimediaFor residential and commercial buildingsFor a new energy landscape.

Motor protection switch with thermal and magnetic triggering These devices are easy to use and set up, with compact and ergonomic products for requirements in the field of starter motors and stop motors.

0.06 -75 kW In addition to appealing and functional design, the TeSys D shooter offers fast and easy installation with a narrow overall width of 45 or. 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and durable connection.

The A9P54732 by iC40N Circuit breaker 3+N C-Char 32A 6kA

Resi9 fault current circuit breaker. 3 polig + N, 63A, rated fault current 30mA, type A. Conditional rated short-circuit current (Inc/I?c) 10,000A, according to EN 61008. Operating voltage (Ue) 400V AC, operating frequency 50 Hz, neutral position left. Double function terminal for cable and forked comb rail on the underside of the device. Rear hat rail fastening element on the underside of the device. Low-wear and user-independent switching of contacts. Color RAL 9003

Circuit breaker Acti 9 iC60H with switch-off capacity of 10kA according to EN 60898, 3-pin 16A Characteristics D. With mechanical front-side fault indicator for displaying triggers by overload and short circuit. Color RAL 9003. Double connection terminal for cable and pin comb rail on the top and bottom. Intermittent insulation cover. actuation of the hat rail fastening element on the front side of the device for toolless actuation and easy accessibility for the user.

fault current circuit breaker iID, 4P, 63A , 30mA, type A. Series: Acti 9 - Product or component type: ground fault protection - Short description of the device: iID - Description of the pole: 4P - neutral position: left - Network type: AC - nominal underbreast and triggering cap. 1500 A according to EN 61008-1, 1500 A according to IEC 61008-1.

Circuit breaker Acti 9 iC60H with switch-off capacity of 10kA according to EN 60898, 3-pin 6A Characteristics C. With mechanical front-side fault indicator for displaying triggers by overload and short circuit. Color RAL 9003. Double connection terminal for cable and pin comb rail on the top and bottom. Intermittent insulation cover. actuation of the hat rail fastening element on the front side of the device for toolless actuation and easy accessibility for the user.

iID type A / design G, according to ÖVE/ÖNORM E 8601, are made possible by modern technologies and functional properties of simpler and more efficient installations with higher safety. The VisiSafe function guarantees that the following switching elements are always safe, regardless of overvoltage conditions, wear or experience of the operators. The Acti 9 circuit breaker offers protection class 2 on the front side of the device and is the only component of its type with such high safety. The distances between device front and internal active parts are twice as large as required by the standard. In order to optimize efficiency, the error message display with the VisiTrip? function recognizes individual faults in the network, thus allowing rapid diagnosis and offers solutions for minimal downtime. This ensures continuous supply and high electrical interference safety, which is particularly important in critical energy supply, such as in hospitals or data centers. All accessories such as auxiliary contacts, reconnectors, communication interfaces, etc. are optionally available.

TeSys U is the first intelligent engine output of the controls, switching and contactors combined in one device. Compact, simple and modular, it adapts to all applications.

fault current protection switches iID, 4P, 40A , 30mA, type A, SI-superimmunized. Series: Acti 9 - Product or component type: Earthlock protection - Short description of the device: iID - Description of the pole: 4P - Neutral position: left - Network type: AC - Nominal underbreast & triggering cap. 1500 A according to EN 61008-1, 1500 A according to IEC 61008-1.

0.06 -75 kW In addition to appealing and functional design, the TeSys D shooter offers fast and easy installation with a narrow overall width of 45 or. 55 mm. They meet international standards. The power sizes 40 to 65 A are equipped with EverLink terminals. These are patented and ensure a reliable and durable connection.