Best sellers

Mit hervorragenden Schirmungsmaß und Dämpfungseigenschaften und einem ausgezeichneten Preis/Leistungsverhältnis ist das SK 2000 plus das ideale Kabel für BK-/SAT- oder terrestrische Anlagen. 135 dB typ. Schirmungsmass ( EN 50117) Kopplungswiderstand

Innenleiter steckbar - sehr schnelle Montage.Für Innenleiter 0,65 mm bis 1,1mm geeignet.Sehr kleines Gehäuse.Abgerunde Kanten an der Kabeleinführung.DOCSIS 3.0 ready.Hohe Entkopplung TV – DATA.Bandbreite: 5-1000 MHz.Nach europäischen Richtlinien 2004/108/CE (EMC) and 73/23/CEE (LVD) - 93/68/CEE.Neue BK-Multimedia-Steckdosen nach Kabelnetzbetreiber StandardInnenleiter steckbar - sehr schnelle Montage.Für Innenleiter 0,65 mm bis 1,1mm geeignet.Sehr kleines Gehäuse.Abgerunde Kanten an der Kabeleinführung.DOCSIS 3.0 ready.Hohe Entkopplung TV – DATA.Bandbreite: 5-1000 MHz.Nach europäischen Richtlinien 2004/108/CE (EMC) and 73/23/CEE (LVD) - 93/68/CEE.

Fettfreies, nicht tropfendes, wasserbasiertes Kabelgleitmittel für den Einsatz im Installationsbereich.Schützt auch bei langen, kurvenreichen Zügen sicher vor Kabelmantelschäden.

4-pole contactor ESB25..N with 36 mm width control 3-phase loads up to 25 A and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely bruised and quiet when switching. An auxiliary switch, which can be installed on the left side as an accessory, as well as plombier caps and a spacer supplement the range. ESB25..N have installation design and meet, among others, the EN61095 household standard, they are therefore particularly suitable for distribution installation.

4-pole contactor ESB25..N with 36 mm width control 3-phase loads up to 25 A and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely bruised and quiet when switching. An auxiliary switch, which can be installed on the left side as an accessory, as well as plombier caps and a spacer supplement the range. ESB25..N have installation design and meet, among others, the EN61095 household standard, they are therefore particularly suitable for distribution installation.

2-pole auxiliary switch EH04..N with 9 mm construction width can be mounted on the left side of all installation contactors ESB/EN..N without tools and are available in different contact areas.

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

These devices are specially designed for switching loads and reporting electrical conditions in a low-voltage switchgear. Depending on the contact layout, they are available as half or entire modules. Devices with light detectors have an LED that ensures optimal luminance with very low consumption. For example, such devices are used to switch displays or other electrical components (such as fans, air conditioning systems).

Load disconnector ILTS-E for safety inserts D0 2-63 A – plug-in technology User-friendly safety load disconnector with plug-in technology: latching mechanism and non-detachable safety insert holder. The fuse can only be exchanged if the system is powerless. For D02 safety inserts and D01 safety inserts with reducer. On both sides with two-part frame clamp and user-friendly transverse wiring in the lower clamp. auxiliary switch with display of the switching position.

Stairlight timers with relapse delay are actuated by buttons, often equipped with a glow lamp. The shift levers are designed for a Glimm lamp current up to 150 ma and are therefore excellently suited for systems in multi-storey buildings. The stairlight time switch with falling-back delay E 232-230 has an electromechanical time relay with synchronous motor drive, with which a high operational reliability in each installation position is ensured. The time range can be set in 15-second steps from one to seven minutes. Switchable after 30s. The multifunctional devices of the product series E 232E-230 Multi 10 and E 232E-8/230 Multi 10 have 10 functions that can be set on the device front.

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

SZ-BSK contact protection cap for busbar blocks

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices (FI) and other installation devices. The phase rail PS1/12 comes with a phase with 10 mm2. The phase rail can be used for a cross wiring of a total of 12TE. Please note that this phase rail is not suitable for cutting.