OBO

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

Hole band in corrugated form, in practical unrolling box.

Light wall and handle with welded head plate for fastening to U-bars, constructions and walls.

Connection clamp system ST, BP, OMEX and LightEarth, on round conductor Rd 8-10, incl. connector 5001/DIN.

Universal clamping block for fastening and connecting circular conductors to constructions - Incl. Hexagonal screw M8 x 25Fitting: Rd 8-10 Material: Steel Weight: 3.4 kg/100 St Type: 324 S-FT Art. No.: 5326303

100 pieces 8X42 multi-purpose plugs 8x42mm, PA, grey-white, 9002 2347547Also suitable as cavity dowels, with collar against slipping. 3 applied fins take up the torque. Required minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5-fold

potential compensation rail according to VDE 0618, part 1 suitable for potential compensation according to DIN VDE 0100-410/-540 and flash protection potential compensation according to DIN VDE 0185-305. The clamping rail 10 x 10 mm consists of nickel-plated brass, the contact-proof terminal blocks made of galvanically galvanized steel, the cover hood and the rail blocks made of gray polystyrene. The cover hood is plombable / inscribable. The potential compensating rail is capable of energizing up to 100 kA (10/350) and has a tie bar with screw securing against self-lockers (e.g. required in industry and ex areas). Connection options: 7 single- or multi-wire lines 2.5-25 mm2 or fine-wire lines up to 16 mm2 (max. Ø 7 mm), 2 single or multi-wire lines 25-95 mm2 or fine-wire lines up to 70 mm2 (max. Ø 13.5 mm) and 1 flat conductor 30 x 35 mm.

Protection class IP54, rated voltage 660 V, nominal cross-section 2.5 ÷ 4 or. 4 mm2 in combination with the clamping block 700/6 M, the box has the nominal cross section 4 mm2, 2 fastening holes for screws up to 5 mm Ø on the outside of the box. 4 cap screws, 7 breakable inserts with thread M20 x 1,5, preferably for cable fittings with short connection thread. Dimensions: 91 x 91 x 51mm lights internal dimensions: 80x80x39 by mm.

Adhesive clip, for clamping on the line

OBO Quick-Schell type 2955/...: for all metric steel armours, as well as light and heavy metric insulating tubes. Suitable for receiving the OBO Quick-Pipe.

OBO Quick-Schell type 2955/...: for all metric steel armours, as well as light and heavy metric insulating tubes. Suitable for receiving the OBO Quick-Pipe.

Steel hardened, galvanized and yellow passivated and hostaflon coated. Senkkopf with T-bit (inner hexagon), the size Ø 3 mm T10, Ø 3.5 mm T15, Ø 4 and 4.5 mm T20, Ø 5 mm T25. The use of the SPRINT screws leads to considerably shortened screw-in times compared to conventional screws. This noticeable advantage is affected by the gripping tip with the 1st gear, which leads to the 2-speed thread. Applications: wood, chipboards, rigips plates, plastic dowels.

Protection class IP54, rated voltage 660 V, nominal cross section mm2, 2 fastening holes for screws up to 6 mm Ø on the outside of the box, 4 lid screws, 10 breakable inserts with thread M20 x 1,5, preferably for cable fittings with short connection thread. Dimensions: 136 x 111 x 57 mm lights internal dimensions: 125x100x44 by mm.

Corrosion-protection binders for covering surface and underground compounds. It consists of petrolatum-coated synthetic fibre fleece with a material thickness of about 1.1 mm. The anti-corrosion binding can be processed cold.

Overvoltage arresters type 2 for photovoltaic systems. Error-resistant Y-circuit for use according to VDE 0100-712 (IEC 60364-712). Overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). Discharge capacity up to 40 kA (8/20) per pole and low DC protection level: