Metz

// Stable steel plate housing // Housing upper part powder-coated in RAL9010 // easy installation and removal of the housing upper part by screw-free fastening // Potential compensation via flat plugs possible // Additional cable strain relief on the housing lower part with cable tie // The housing is suitable for direct wall mounting, as a desktop and with support rail adapter mini for support rail mounting // The housing bottom of the 3-port and 4-port version can be removed. Here there is the additional fastening option via a 60 mm hole track // Optionally available and usable in all housings: FO extension set for module and Keystone AP housing 130861-MSK-E // Optionally available for housings 2 x 12 Port: Tension relief for patch cables 130861-24ZE-E // Variants: 3, 4, 6, 8, 12, 16 and 2 x 12 PortsProduct description on the Manufacturer page

70 mm / 100 mmProduct description on the Manufacturer page

IP44 splash housing for two individual modules in modular design // IP44 protection only in closed state (without plugged patch cable) // cable feed for one or two cables from above // break-proof // colour greyProduct description on the Manufacturer page

RJ45 Connection unit E-DAT module in flange housing according to ISO/IEC 24702 and IEC 61076-3-106 Var. 6 // Cat.6A component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011Product description on the Manufacturer page

Particularly suitable for non-shielded and shielded Class EA systems // fully shielded Cat.6A patch cable AWG 26/7 // two shielded RJ45 connectors, wiring 1 - 1 // cable type: S/FTP 4x2xAWG 26/7 PIMF // Cable sheath LSHF(LSOH), halogen-free // Cat.6A Component Test according to ISO/IEC 11801 Ed. 2.2 (2011-06) and IEC 61935 Ed. 3.0 (2010-07), GHMT certified // Class EA Link up to 500 MHz according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1: 2011-09 // for 10GBit Ethernet(IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT can be slightly sprayed with integratedProduct description on the Manufacturer page

for the connection/extension of data cables up to Cat.7A // in conjunction with Cat.6, Cat.6A, Cat.7A and Cat.7A cables and Cat.6 connection technology, the class EA according to ISO/IEC 11801 Ed.2.2:2011-06 is met // connection of data lines AWG26/1 - 22/1 (one-wire) // cable connection possible from one or two sides // cable sharingProduct description on the Manufacturer page

Rigid connection unit with E-DAT module // Cat.6A component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA according to ISO/IEC 11801 Ed.2.2 209 x 294 // Integrated dust protection flaps (also available in colour) // Color of cover parts perlwhite RAL 1013 or pure white RAL 9010, surface matt texture // Variants: 1 port, 2 port, 3 port // Colour variations: pure white and pearl whiteProduct description on the Manufacturer page

Rigid connection unit with E-DAT module // Cat.6A component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA 11801 Ed 209 x 294 // Integrated dust protection flaps (also available in color) // Color of the cover parts perlwhite RAL 1013 or pure white RAL 9010, surface matt texture // compatible with design central pieces of switch programs (Attention 3 Port central pieces currently only available from JUNG) // Not suitable for installation in standard under plaster and hollow wall cups! // Variants: 1 port, 2 port white and 3 port //Product description on the Manufacturer page

R & D & D & D The module is protected from direct contact by a cover. During assembly in protective-insulated distributors, protection class II thus remains. For this purpose, the potential compensation spring must be removed. // Integrated dust protection flap (also available in colour)Product description on the Manufacturer page

Particularly suitable for non-shielded and shielded Class EA systems // fully shielded Cat.6A patch cable AWG 26/7 // two shielded RJ45 connectors, wiring 1 - 1 // cable type: S/FTP 4x2xAWG 26/7 PIMF // Cable sheath LSHF(LSOH), halogen-free // Cat.6A Component Test according to ISO/IEC 11801 Ed. 2.2 (2011-06) and IEC 61935 Ed. 3.0 (2010-07), GHMT certified // Class EA Link up to 500 MHz according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1: 2011-09 // for 10GBit Ethernet(IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT can be slightly sprayed with integratedProduct description on the Manufacturer page

Particularly suitable for non-shielded and shielded Class EA systems // fully shielded Cat.6A patch cable AWG 26/7 // two shielded RJ45 connectors, wiring 1 - 1 // cable type: S/FTP 4x2xAWG 26/7 PIMF // Cable sheath LSHF(LSOH), halogen-free // Cat.6A Component Test according to ISO/IEC 11801 Ed. 2.2 (2011-06) and IEC 61935 Ed. 3.0 (2010-07), GHMT certified // Class EA Link up to 500 MHz according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1: 2011-09 // for 10GBit Ethernet(IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT can be slightly sprayed with integratedProduct description on the Manufacturer page

Particularly suitable for non-shielded and shielded Class EA systems // fully shielded Cat.6A patch cable AWG 26/7 // two shielded RJ45 connectors, wiring 1 - 1 // cable type: S/FTP 4x2xAWG 26/7 PIMF // Cable sheath LSHF(LSOH), halogen-free // Cat.6A Component Test according to ISO/IEC 11801 Ed. 2.2 (2011-06) and IEC 61935 Ed. 3.0 (2010-07), GHMT certified // Class EA Link up to 500 MHz according to ISO/IEC 11801 Ed.2.2: 2011-06, DIN EN 50173-1: 2011-09 // for 10GBit Ethernet(IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT can be slightly sprayed with integratedProduct description on the Manufacturer page

RJ45 sockets // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EAEC 209 x 294 // Integrated dust protection flaps (also available in colour) // compatible with design central pieces of switch programs // Suitable for installation in standard under-put cups and hollow wall cups // Cover parts pure white RAL 9010 or pearl white RAL 1013 // Variants: 1 port pure white, 1 port perlwhite, 2 port pure white, 2 port perlwhiteProduct description on the Manufacturer page

RJ45 sockets // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008)Product description on the Manufacturer page

RJ45 sockets // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EAEC 209 x 294 // Integrated dust protection flaps (also available in colour) // compatible with design central pieces of switch programs // Suitable for installation in standard under-put cups and hollow wall cups // Cover parts pure white RAL 9010 or pearl white RAL 1013 // Variants: 1 port pure white, 1 port perlwhite, 2 port pure white, 2 port perlwhiteProduct description on the Manufacturer page