Jung

Radio, with display, set mono, with 1 speaker

Switch actuator, 2x, UP, with integrated bus coupler, with branch connection, ETS product family: output, product type: binary output 2x, supply KNX: voltage: DC 21 to 32 W =, power consumption: typical 150 mw, connection: prefabricated line, YY 6 x 0.6, approx. 33 cm long, capable of being extended to a maximum of 5 m, output: number 2, switch type: 2 closers (potential-free relay contacts, -?contacts,) maximum switching voltage: AC 230 W ~, maximum switching current: 2 x 6 A at AC 230 W ~, switching power: incandescent lamps 1200 W, HV halogen lamps 1200 W, NV halogen lamps 500 VA (conventional transformer)

70 %. 0.5 seconds and pulse interval approx. 3 seconds, 2-point lighting control, functions with IR remote controls, operation with IR remote control, auxiliary 2-wire or installation sensor, teach function for adapting the brightness threshold, in combination with IR remote controls, shut-off warning, short-term operation, for example, for controlling acoustic signal transmitters, LED display, presence simulation

Standard, with display, white backlit, rated voltage: AC 230 W ~, N conductor required, switching current: 10 m to 10 (4) ma, 230 W ~, power consumption: approx. 1.2 W, output: relay (closer,) floating, temperature setting range: + 5 to + 30°C in 0.5°C steps, temperature display: 0.1°C steps, space regulator, remote sensor

Standard, with display, white backlit, rated voltage: AC 230 W ~, N conductor required, switching current: 10 m to 10 (4) ma, 230 W ~, power consumption: approx. 1.2 W, output: relay (closer,) floating, temperature setting range: + 5 to + 30°C in 0.5°C steps, temperature display: 0.1°C steps, space regulator, remote sensor

Floor heating controller, 10 A, AC 230 W ~, 50/60 Hz, screw fastening, closer 1-pole (relay contact type, non-potential,) with on-off switch, red LED: control unit demands heat (heating operation,) green LED: temperature reduction ON, switching difference: approx.1 K, temperature range: approx. + 10 to + 50 °C, separate connection for time-controlled night sinks: NTF temperature

Standard, with display, white backlit, rated voltage: AC 230 W ~, N conductor required, switching current: 10 m to 10 (4) ma, 230 W ~, power consumption: approx. 1.2 W, output: relay (closer,) floating, temperature setting range: + 5 to + 30°C in 0.5°C steps, temperature display: 0.1°C steps, space regulator, remote sensor

Radio, with display and sensor keys, VHF, reception in frequency range 87,5 Mhz to 108 Mhz, nominal voltage: AC 230/240 W ~, 50/60 Hz, real glass front, stereo reception, connection terminals for two speakers, stereo/mono switch, integrated VHF antenna, optional external litter

Rotary dimmer, with pressure interchanger, rated voltage: AC 230/240 W ~, 50 Hz, connection power: 230/240 V-Glüh- und -Halogenlampen 100 to 1000 W, mixed loads of specified load types, minimum load: 100 W, maximum clamping power cross-section: 2 x 2.5 mm2 or 1 x 4 mm2, alternating circuit via mechanical interchanger, alternating circuit with 2 dimmers not allowed

Rotary dimmer, with pressure interchanger, rated voltage: AC 230/240 W ~, 50 Hz, connection power: 230/240 V-Glüh- und -Halogenlampen 100 to 1000 W, mixed loads of specified load types, minimum load: 100 W, maximum clamping power cross-section: 2 x 2.5 mm2 or 1 x 4 mm2, alternating circuit via mechanical interchanger, alternating circuit with 2 dimmers not allowed

Radio, with display and sensor keys, VHF, reception in frequency range 87,5 Mhz to 108 Mhz, nominal voltage: AC 230/240 W ~, 50/60 Hz, real glass front, stereo reception, connection terminals for two speakers, stereo/mono switch, integrated VHF antenna, optional external litter

Power supply, AC 24 W ~, Power supply: primary: AC 230 W ~ (± 10 %), secondary: AC 24 W ~ (± 15 %), output current: maximum typical 1 A, short-circuit-proof by thermal protection, for weather station Art.-No. 2224 REG W and analog input Art.-No. 2214 REG A

Radio, with display and sensor keys, VHF, reception in frequency range 87,5 Mhz to 108 Mhz, nominal voltage: AC 230/240 W ~, 50/60 Hz, real glass front, stereo reception, connection terminals for two speakers, stereo/mono switch, integrated VHF antenna, optional external litter

maximum operating time:

Power supply, REG, for Smart Control Art. No.: SC 1000 KNX, Input voltage: AC 110 to 240 W ~, 50/60Hz ~, Input current: 730 ma, Output voltage:24 W DC, Output current: 1.5 A, Connection: Screw terminals, Width: 72 mm (4 TE,) maximum 10 Smart Control per power supply