Jung

Socket, 3x, plaster, 16 A, 250 W ~, with base plate, without strain relief

Key switch, 10 AX, 250 W ~, blind switch 2-pin, for profile half cylinder with approx. 40 mm total length (DIN 18252)

Key switch, 10 AX, 250 W ~, Universal replacement switch 1-pole, no dismantling protection, cylinder- flush cover, at least 55 mm installation depth, for profile half cylinders with a total length of about 40 mm (DIN 18252)

Key switch, 10 AX, 250 W ~, Universal Switch 2-pin, for profile half cylinder with approx. 40 mm total length (DIN 18252)

Cable, pipe and channel insertion, for cable and mini channel

Rotary switch, 16 AX, 250 V ~, 3-step switch, with zero position, with scale disc, screw fastening, without fastening claws, with screw clamps for conductors up to 4 mm2, connection clamps according to DIN VDE 0632 (EN 60 669)

Switching clock, 16 AX, 250 V ~, 2-pin, with scale disc, maximum 15 minutes, screw fastening, without fastening claws, with screw clamps for conductors up to 4 mm2, connection clamps according to DIN VDE 0632 (EN 60 669)

Relay insert 1-channel, rated voltage: AC 230 W ~, 50/60 Hz, connection power: incandescent lamps 2300 W, HV halogen lamps 2300 W, Tronic transformer 1500 W, conventional transformer 1000 W, fluorescent lamps 1200 W (uncompensated,) 920 W (parallel-compensated) and 2300 W (duo circuit), N conductor required

Relay insert 1-channel, rated voltage: AC 230 W ~, 50/60 Hz, connection power: 230 V bulbs 800 W, 230 V halogen lamps 750 W, mixed loads of specified load types, minimum load: 12 W, 100 ma, -?switching contact: floating, suitable for switching a second outer conductor, no SELV, auxiliary junction combination possible, N conductor required

Maximum load: 100 mm

Pulse transmitter, for stairwell automatic switches, for conversion of 3- or. 4-wire staircase circuits on automatic switches, for use with a maximum of 8 automatic switches Standard or automatic switches Universal (with simultaneous use of unilluminated mechanical probes, e.g. 531 U, a maximum of 6 automatic switches), only in conjunction with stairway automat 208 REG

Rotary switch, 10 AX, 250 V ~, blind switch/taster, 1-pole (1 drive), with scale disc, with screw terminals for conductors up to 2.5 mm2, connection terminals according to DIN VDE 0632 (EN 60 669)

Rotary switch, 10 AX, 250 V ~, blind switch/taster, 2-pin (2 drives), with scale disc, with screw terminals for conductors up to 2.5 mm2, connection terminals according to DIN VDE 0632 (EN 60 669)

NV-Triac switch insert "Loudless switching," rated voltage: AC 230 W ~, 50/60 Hz, connection power: 40 to 400 W/VA, 230 V-cooling lamps, 230 V-halogen lamps, conventional transformers 400 W (at least 85 % nominal load,) total load, including transformer loss power 400 W/VA, residual phase cut: approx

Tronic switchgear "Smooth switching," rated voltage: AC 230 W ~, 50/60 Hz, connection power: 50 to 420 W/VA (short-circuit resistant,) 230 V bulbs, 230 V halogen lamps, Tronic transformers, residual phase cut: approx. 2 ms, fuse: electronic, soft start: switch-on currents are limited, power added: ULZ15