Jung

No. 2-wire, application, nominal voltage: AC 230 W ~, mains frequency: 50/60 Hz, connection: screw terminals, 1 x 0.5 to 4 mm2 or 2 x 0.5 to 2.5 mm2 (single and fine-drained without wire end sleeve) and 1 x 0.5 to 4 mm2 or 2 x 0.5 to 1.5 mm2 (skinned with wire end sleeve,) total length of side points:.

Probe dimmer Universal LED, use, with auxiliary input, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 20 mm

Sensor dimmer standard LED, use, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 20 mm

Not applicable

Switching insert Electronic 1-channel, with auxiliary input, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. Not more than 50 mm

Number of parts:

Cover, 50 x 50 mm, screw fastening, for IAE/UAE sockets and data cans Cat. 5e and Cat. 6 (2 x 8-pin)

Cover, for speaker connectors and chassis connectors

Key switch, 10 AX, 250 W,~ Blind button 2-pin, for profile half cylinder with approx. 40 mm total length (DIN 18252)

Key switch, 10 AX, 250 W,~ blind turntable 1-pole, for profile half cylinders with a total length of approximately 40 mm (DIN 18252)

Key switch, 10 AX, 250 W,~ blind turntable 1-pole, no disassembly protection, cylinder flush cover, at least 55 mm installation depth, for profile half cylinders with approx. 40 mm overall length (DIN 18252)

Key switch, 10 AX, 250 W,~ button (changer) 1-pole, for profile half cylinders with approx. 40 mm total length (DIN 18252)

Tronic switchgear "Smooth switching," rated voltage: AC 230 W ~, 50/60 Hz, connection power: 50 to 420 W/VA (short-circuit resistant,) 230 V bulbs, 230 V halogen lamps, Tronic transformers, residual phase cut: approx. 2 ms, fuse: electronic, soft start: switch-on currents are limited, power added: ULZ15

NV-Triac switch insert "Loudless switching," rated voltage: AC 230 W ~, 50/60 Hz, connection power: 40 to 400 W/VA, 230 V-cooling lamps, 230 V-halogen lamps, conventional transformers 400 W (at least 85 % nominal load,) total load, including transformer loss power 400 W/VA, residual phase cut: approx

Rotary switch, 10 AX, 250 V ~, blind switch/taster, 2-pin (2 drives), with scale disc, with screw terminals for conductors up to 2.5 mm2, connection terminals according to DIN VDE 0632 (EN 60 669)