Distribution installation

Legrand FI/LS protection switch DX3, type AC, for alternating fault currents. According to EN 61009-1, VDE 0664-20, undelayed. LS protection switch part: C characteristic. Rated voltage: 230 V~ , Rated switching capacity Icn 6 kA, shock current-proof up to 250 A, Trigger indicator: blue=error current or test key triggering, colorless= short-circuit or hand triggering. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information on the front of each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, with undercut protection for safe insertion of the conductor into elevator terminal, attachment of auxiliary devices possible.

Legrand FI/LS switch DX3, 1-pole with switching neutral conductor, type A, for alternating and pulsating direct fault currents according to EN 61009-1, VDE 0664-20, undelayed, measurement current In 16 A, measurement error current Idn 30 mA.B characteristic, measurement voltage Un 230 VAC, measurement frequency 50 Hz. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information on the front of each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, with undercut protection for safe insertion of the conductor into elevator terminal, attachment of auxiliary devices possible.

Legrand Conductor safety switch DX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 1-pole with switching neutral conductor, C-characteristics, measurement current In 16 A, measurement switching capacity Icn 6 kA according to EN 60898-1, measurement voltage Un 230 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch DX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 1-pole with switching neutral conductor, C-characteristics, measurement current In 13 A, measurement switching capacity Icn 6 kA according to EN 60898-1, measurement voltage Un 230 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand DX3, 4-pin, 63A 400 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand DX3, 3-pin, 63A 400 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand DX3, 1-pole, illuminated, 20A 250 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand DX3, 1-pole, 20A 250 VAC, according to EN 60947-3, EN 60669-2-4. Use category AC-22A. Fastening to DIN profile rail EN 60715 by latching quick fixes, clear information at the front on each device, unambiguous switching position indicator red/green on switching lever (lockable), with labeling window, one-pole displaceable with Legrand Pin comb rails, attachment of auxiliary devices possible.

Legrand Compensation element, 0.5-modulated, mounting on DIN profile rail EN 60715, for heat decoupling between individual distributor devices. For compensation when using half modules. As a blind cover for unused distribution mask fields.

Legrand auxiliary switch, 1 changer, reports the switching state for manual and fault triggering, for LS switches, FI/ FILS protection switches Legrand TX3 and DX3 series. Tool-free assembly by simple latching on the left side of the main device, maximum per main device 3 auxiliary devices or 2 auxiliary devices + 1 command device.

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with switching neutral conductor, C-characteristics, measurement current In 32 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with switching neutral conductor, C-characteristics, measurement current In 25 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with interconnecting neutral conductor, C-characteristics, measurement current In 20 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).

Legrand Safety switch TX3 according to EN 60898-1, VDE 0641-11, EN 60947-2, 3-pin with switching neutral conductor, C-characteristics, measurement current In 16 A, measurement switching capacity Icn10 kA according to EN 60898-1, measurement voltage Un 400 VAC, measurement frequency 50/60 Hz, energy limiting class 3, attachment to hat profile rail EN 607. Circuit protection switches with C-characteristics are provided for line protection in devices with high switch-on currents (e.g. motors and transformers).