Dispensers FR

PROTEC.class PFRAD 4389 empty FR outlet 43x89mm 10 pieces
PROTEC.class PFRAD 4389 empty FR outlet 43x89mm 10 pieces
2-7 days
Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 89 mm Width: 43 mm Depth: 37 mm Number of inserts: 10
€9.99
PROTEC.class PFRAD 8585 empty FR outlet 85x85mm 10 pieces
PROTEC.class PFRAD 8585 empty FR outlet 85x85mm 10 pieces
2-7 days
Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 85 mm Width: 85 mm Depth: 37 mm Number of inserts: 12
€10.43
PROTEC.class PFRAD 7575 empty FR outlet 75x75mm 10 pieces
PROTEC.class PFRAD 7575 empty FR outlet 75x75mm 10 pieces
2-7 days
Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 75 mm Width: 75 mm Depth: 37 mm Number of inserts: 7
€9.11
PROTEC.class PFRAK FR branch box up to 2.5mm IP66
PROTEC.class PFRAK FR branch box up to 2.5mm IP66
2-7 days
Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 76x76x51 mm For cable Ø: 3-14 mm Max. Conductor cross-section: 2.5 mm2
€3.41
PROTEC.class P2KAK 8585 AP/FR branch box 85x85x40
PROTEC.class P2KAK 8585 AP/FR branch box 85x85x40
2-7 days
2 Components Humidity Drainage Box High ease of assembly and easy handling, three penetration membranes on all four sides, rear membrane introduction for lines up to 5 x 2.5 mm2, loss-proof lid, fastening strap for cable tie assembly. Protection: IP 54. Color: grey. Windproof, halogen-free. 12 introductions from behind. Length: 85 mm Width: 85 mm Depth: 45 mm Material: plastic Type of housing passage: sealing membrane
€2.11
PROTEC.class PFRAD 100100 empty FR outlet 10 pieces
PROTEC.class PFRAD 100100 empty FR outlet 10 pieces
2-7 days
Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inserts M20, external fastening points, opening cutter, halogen-free, protection type: IP 54, application temperature range: -25 °C to 40 °C, color: grey. Depth: 37 mm. Length: 100 mm Width: 100 mm Depth: 42 mm Number of inserts: 12
€21.32
PROTEC.class PFRAD 8585 FR outlet loose bulk 50 pieces
PROTEC.class PFRAD 8585 FR outlet loose bulk 50 pieces
2-7 days
Moisture area outlets, loosely sprinkled thermoplastic flame-retardant material, IP55 with condensation water opening, 4 floor inlets M20, empty without clamps, external fastening points, opening cutter beiligend, halogen-free, operating temperature range -25 °C to 40 °C Length: 85 mm Width: 85 mm Depth: 37 mm Protection type (IP): IP54 Color: grey lid: non-transparent Number of inserts 12
€49.95
PROTEC.class PFRAK FR branch box up to 4.0mm IP66
PROTEC.class PFRAK FR branch box up to 4.0mm IP66
2-7 days
Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 85x85x51 mm For cable Ø: 3-12 mm / M20 Max. Conductor cross section: 4.0 mm2
€4.94
PROTEC.class PFRAK FR branch box up to 6.0mm IP66
PROTEC.class PFRAK FR branch box up to 6.0mm IP66
2-7 days
Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 110x110x66 mm For cable Ø: 5.2-17 mm / M25 Max. Conductor cross section: 6.0 mm2
€8.53
PROTEC.class PFRAK FR branch box up to 10.0mm IP66
PROTEC.class PFRAK FR branch box up to 10.0mm IP66
2-7 days
Branch boxes, without clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV-resistant. Type 308, 407 and 607 integrated thread (no mating nut required). Type 108, 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: 4 internal openings (except type 108 with 2 internal openings) outside the sealing area or type 108, 308 and 407 with quick mounting brackets. 4 unreleasable lid screws. Protection type according to EN 60529. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 140x140x82 mm For cable Ø: 6-21 mm / M20-M32 Max. Conductor cross-section: 10.0 mm2
€13.98
PROTEC.class PFRAK branch box 4mm IP66 with clamp
PROTEC.class PFRAK branch box 4mm IP66 with clamp
2-7 days
Branch boxes, with clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV resistant type 308, 407 and 607 integrated thread (no counter nut required). Type 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids, seawater. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: Through 4 internal openings outside the sealing area or with type 308 and 407 with quick mounting bracket. 4 unreleasable lid screws. Screw clamps 5-pin. Type 308: Clamp 2.5 mm2, cable insert 8 side, membrane insert, 400 W Type 407: Clamp 4.0 mm2, cable insert 7 side +2 in the bottom, membrane insert, 690 W Type 607: Clamp 6 mm2, cable insert 7 side +3 in the bottom, membrane insert, 690 W Type 1010: Clamp 10mm2, cable insert 10 side +2 in the bottom, with gasket, 690 W14. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 85x85x51 mm For cable Ø: 3-12 mm / M20 Max. Conductor cross section: 4.0 mm2
€5.95
PROTEC.class PFRAD 8585 ROT empty FR outlet 85x85 10 pieces
PROTEC.class PFRAD 8585 ROT empty FR outlet 85x85 10 pieces
2-7 days
Moisture chamber outlets for safety circuits Thermoplastic flame-retardant material, IP55 with condensation water opening, bottom inlets M20, external fastening points, opening cutters included, halogen-free, design: empty, without clamps, length: 85 mm, width: 85 mm depth: 37 mm, introductions: 12. Color: red
€21.98
PROTEC.class PFRAD 4389 FR branch box loose 30 pieces
PROTEC.class PFRAD 4389 FR branch box loose 30 pieces
2-7 days
Moisture area outlets, loosely sprinkled thermoplastic flame-retardant material, IP55 with condensation water opening, 4 bottom inlets M20, empty without clamps, external fastening points, opening cutter beiligend, halogen-free, operating temperature range -25 °C to 40 °C Length: 89 mm Width: 43 mm Depth: 37 mm Protection type (IP): IP54 Color: grey lid: non-transparent Number of inserts 10
€29.29
PROTEC.class PFRAD 100100 FR outlet loose cut 30 pieces
PROTEC.class PFRAD 100100 FR outlet loose cut 30 pieces
2-7 days
Moisture area outlets, loosely sprinkled thermoplastic flame-retardant material, IP55 with condensation water opening, 4 floor inlets M20, empty without clamps, external fastening points, opening cutter beiligend, halogen-free, application temperature range -25 °C to 40 °C Length: 100 mm Width: 100 mm Depth: 42 mm Protection type (IP): IP54 Color: grey lid: non-transparent Number of inserts 12
€63.27
PROTEC.class PFRAK branch box 6mm IP66 with clamp
PROTEC.class PFRAK branch box 6mm IP66 with clamp
2-7 days
Branch boxes, with clamps Material: polypropylene, fiberglass reinforced. Sealing: thermoplastic elastomer. Housing of two components (robusted housing and elastic insertion membranes). Flame retardant according to EN 60695-2-11. Halogen-free. Impact resistant and UV resistant type 308, 407 and 607 integrated thread (no counter nut required). Type 407, 607 and 1010. Chemical resistance: resistant to alkalis and inorganic acids, seawater. Voltage cracking: low. Temperature resistance: -30°C to +100°C, short to approx. Installation temperature: -5°C to +60°C. Incandescent wire test: 750°C. Colour: grey. Mounting options: Through 4 internal openings outside the sealing area or with type 308 and 407 with quick mounting bracket. 4 unreleasable lid screws. Screw clamps 5-pin. Type 308: Clamp 2.5 mm2, cable insert 8 side, membrane insert, 400 W Type 407: Clamp 4.0 mm2, cable insert 7 side +2 in the bottom, membrane insert, 690 W Type 607: Clamp 6 mm2, cable insert 7 side +3 in the bottom, membrane insert, 690 W Type 1010: Clamp 10mm2, cable insert 10 side +2 in the bottom, with gasket, 690 W14. Protection type: IP 66; IP 67 with screw connections. In the case of design protection IP 66 - sweat water formation possible. By using casting gel or pressure compensation cable screw connections which serve to reduce condensation water, a condensation water formation can be strongly limited and the protection class IP 66 is maintained. Condensation water openings are present at the rear, the protection is reduced when punched out. Minimum order quantity: 1 piece External dimensions: 110x110x66 mm For cable Ø: 5.2-17 mm / M25 Max. Conductor cross section: 6.0 mm2
€12.51