List of products by brand Finder

Multifunctional staircase light machine, for DIN rail, 17.5 mm wide, 1 closer for 16 A / 250 W AC, contact material Agsno2, time range 0.5 to 20 min. suitable for continuous light circuit, 8 programs, etc. In addition, there is a service function (function ME, or MP) The MP function additionally includes a shut-off warning. For a key actuation > 5 seconds, the output contact is closed for 60 minutes. This service function can be reset by a new probe actuation > 5 seconds. The contact switches in the voltage zero passage, suitable for L and N circuits, lamp loads: incandescent and halogen lamps 3000 W, energy saving lamps 600 W, LED (230 W AC) 600 W, NV halogen lamps or LED with EEC 600 W, NV halogen lamps or LED with KWG 1500 W, fluorescent lamps with EEC 1500 W, fluorescent lamps connection with KWG 1000 W.

Staircase Light Machine, for DIN rails, 17.5 mm wide, all connections can also be made below, 1 closer for 16 A/250 W AC, contact material Agsno2, 3 functions: time range 0.5 to 20 min, continuous light circuit and service function (with actuation of the probe for more than 5 seconds, the output contact closes for 60 minutes. Switches in voltage zero crossing, suitable for L and N circuits, lamp loads: 3000 W incandescent and halogen lamps, energy saving lamps 600 W, LED (230 W AC) 600 W, NV halogen lamps or LED with EEC 600 W, NV halogen lamps or LED with KWG 1500 W, fluorescent lamps with EEC 1500 W, fluorescent lamps with KWG 1000 AC, connection voltage.

Staircase Lighting Machine (Function Switching wiper,) retriggerable, with zero passage, for DIN rail, 17.5 mm wide, 1 closer for 16 A / 250 W AC, contact material Agsno2, time range 0.5 to 20 min. suitable for N switching, the foot point of the probe and the L connection of the load are at point 3. Lamp loads: incandescent and halogen lamps 3000 W, energy saving lamps 600 W, LED (230 W AC) 600 W, NV halogen lamps or LED with EEC 600 W, NV halogen lamps or LED with KWG 1500 W, fluorescent lamps with EEC 1500 W, fluorescent lamps with KWG 1000 W, connection voltage: 230 W AC All connections on the lower side. For retrofitting existing systems and as a replacement. The probes must be suitable for switching the lamp load.

Insulation switch for external mounting, IP 54, 1 closer for 16 A, max. Switching power at 230 W AC: AC1 3700 VA, AC15 750 VA, Lamp load: incandescent and halogen lamps 2000 W, energy saving lamps 400 W, LED (230 W AC) 400 W, NV halogen lamps or LED with EEC 400 W, NV halogen lamps or LED with KWG 800 W, fluorescent lamps with EEC 1000 W, fluorescent lamps with KWG 750 W, with LED. Switch-on current: 120 A - for 5 ms, including adapter for post mounting, switch-on threshold: 1 to 80 Lux, operating voltage 230 W AC

Dimmer for chassis or can mounting, dimmes step-by-step, 2 modes of operation can be selected via pushbutton: (dimmer and memory function). usable for light bulbs and halogen lamps, Max. Power output circuit: 400 W, thermal overload protection installed, lamp loads: 400 W incandescent and halogen lamps, 400 W NV halogen lamps over EEC 400 W, switch-on time(ED): 100 %, minimum power: 10 W, connection voltage: 230 W AC.

Damping switch for DIN rails, 1 closer floating 16 A/250 W AC, with LED, max. Switching power at 230 W AC: AC1 4000 VA, AC15 750 VA, lamp loads: incandescent and halogen lamps 2000 W, energy saving lamps 400 W, LED (230 W AC) 400 W, NV halogen lamps or LED with EEC 400 W, NV halogen lamps or LED with KWG 800 W, fluorescent lamps with EEC 1000 W, fluorescent lamps with KWG 750 W, adjustable.

Monofunction time relay for DIN rail, 22.5 mm wide, 1 changer for 16 A/250 W AC, contact material Agni, function: response delay, 8 time ranges: 0.05 s - 10 days, supply voltage: 24-240 W AC/DC (50/60 Hz)

Dimmer for DIN rail, with memory function. 2 modes of operation for 3 types of lamps can be selected via selector switches, the minimum brightness is adjustable. Output circuit: 300-500 W. Switch-on period(ED): 100 %, minimum switching power: 3 W. Lamp loads: incandescent and halogen lamps 500 W, NV halogen lamps via ring core transformer 500 W, NV halogen lamps via iron core transformer 500 W, NV halogen lamps via EEC 500 W, dimmable energy saving lamps 100 W, dimmable LED lamps internal temperature.

SSR relays in 17.5 mm housing, input voltage 90 to 265 W AC, 1 closer for 5 A, switch-on current up to 300 A for 10 ms, switching load voltage range 48 to 265 W AC, zero pass switch, lamp loads: AC and halogen lamps 1000 W, energy saving lamps 800 W, LED (230 W AC) 800 W, NV halogen lamps or LEDs with EECHave.

3-phase network monitoring for series installation 400 W AC 50/60 Hz, for DIN rails, 1 changer for 6 A (AC1,) contact material Agcdo, contact voltage 250 W AC, max. Contact voltage 400 W AC, Contact material: Agcdo, Automated design: 17.5 mm wide, Phase succession and phase failure monitoring also for back voltage, Supply voltage Working range 170 - 500 W, LED status display

Electrical thermostat for installation in the control cabinet, adjustable functions and switching thresholds, switch-on temperature range: from +10 to +60°C, switch-on humidity range: 50 to 90% rh, 1 closer 10 A, supply voltage: from 110 to 240 W AC/DC, LED status display, 17.5 mm wide, for support rail 35 mm (EN 60715)

Level monitoring for DIN rails, 1 changer for 16 A, contact material: Agcdo, machine design: 35 mm wide, monitoring of up to 3 sensors, sensitivity 5 to 150 kohm adjustable, delay time 0.5 or 7 seconds selectable, filling or emptying monitoring function selectable, LED status display, supply voltage 230 W AC, relay protection type: IP 20.

Multifunction time relay for DIN rail, 17.5 mm wide, 1 changer for 16 A / 250 W AC, contact material: Agni. Functions: AI: response delay, DI: turn-on wiper, SW: pulse relay (blinker) pulse start, BE: reverse delay, CE: response/relapse delay, DE: pulse shaper (switch-on wiper), time range: 0.1 s - 24 h supply voltage: 12-240 W DC/AC (50/60 Hz,)

Multifunction time relay for DIN rail, 22.5 mm wide, 1 changer for 16 A / 250 W AC, contact material Agni, functions: response delay, turn-on wiper, pulse relay (blinker) symmetrical pulse start, fallback delay, response/relapse delay, turn-on wiper with B1, watchdog function (WD) - turn off when the start contact remains closed for longer than the set time

Electronic control clock for DIN rail, joystick programming or programming via an NFC-enabled smartphone with the Finder Toolbox - Android App. After installation of Finder- App can be read out an existing program or reprogrammed with maximum flexibility. To transfer the data, the timer is touched with the smartphone. LCD display with backlight, 1 changer for 16 A, contact material AgSnO2, max. Switching power at 230 V AC: AC1 4000 VA, AC15 750 VA, lamp loads: light bulbs 2000 W, energy saving lamps 400 W, LED (230 V AC) 400 W, NV halogen lamps or LED with EVG 400 W, NV halogen lamps or LED with KVG 800 W, fluorescent lamps with EVG 1000 W, fluorescent lamps with KVG 750 W.