List of products by brand Protec

Conductor terminals for mounting on DIN rails, e.g. for small installation distributors and counters acc. WDE 0603 Clamping points: 7 or 12. Clamp: brass, cross section 6 mm x 9 mm. Screws: M5, steel, galvanized/passivated (Cr-VI-free). Housing: polyamide, impact resistant, flameproof. Corners rounded. Line connection: 1 ... 16 mm2 rigid / 1 ... 10 mm2 fine-wired with wire end sleeve (round pressing or square pressing, trapezoidal pressing up to 6 mm2) screw connection, recommended. Applying torque 1.2 Nm.- Standards / Requirements: Connecting material for low voltage circuits for household and similar purposes WDE 0613, EN 60998. Mounting: On DIN support rail according to EN 50022 / EN 60715. Nominal current: 63 A. Insulation voltages: 690 W (distributor and control cabinet inlet, degree of contamination 2). 500 W pollution level 3) Uimp = 6 kw. Touch protection: IP00 Type additive Ä-F2 –: IP20, fingerproof. Screw terminal. Combi-cross slot Z2 (positive).

Plug SCHUKO® 2-pin + PE, 16 A / 250 W, protective contact DIN 49441, connection line up to 3 x 1.5 mm2 SCHUKO plug made of thermoplastic, 2 polig + earth, 16A 250W, according to DIN 49440/441, color black Color: black Plug direction: straight connection technology: screw clamp protection type (IP): IP20

Coupling, PWTSC protective contact DIN 49440, 2-pin + PE, 16 A / 250 W, connection line up to 3 x 1.5 mm2. PPKU 08: With Knickschutztülle. Plug-in direction: straight connection technology: screw clamp Color: grey Material: plastic Material quality: PWTSC Protection type (IP): IP20 RAL Number: 7035 SCHUKO coupling, 2 polig + earth, 16A 250W, according to DIN 49440/441, made of PWTSC, grey

Rubber plug connection line up to 3 x 1.5 mm2, 2-pin + PE, 16 A / 250 W, protection contact DIN 49441, with French/Belgian earth color: black plugging direction: straight connection technology: screw clamp Material: rubber-SCHUKO plug, 2 polig + earth, 16A 250W, according to DIN 49440/441, color black, protection type spray-proof IP44EE 7

Suitable for cable screw connections PKWM thread size metric/PG: 25 thread type: metric material quality: polyamide halogen-free: Yes fiberglass reinforced: Yes incline: 1.5 RAL: 7035 Key width: 32 mm

Diaphragm sleeve 2 Components Polypropylene / thermoplastic elastomer, dustproof, for use with mating nut or in existing thread, silicone-free, plug-in length: 9.5 mm, glow wire test: 750° nominal size: M 20 cable-Ø: 1 - 13 mm protection type (IP): IP66 Material: plastic Halogen-free: Yes Colour: light grey

Diaphragm sleeve 2 Components Design of polypropylene / thermoplastic elastomer, dustproof, for use with mating nut or in existing thread, silicone-free, plug-in length: 9.5 mm, incandescent wire testing: 750° nominal size: M 25 cable-Ø: 1 - 18 mm protection type (IP): IP66 Material: plastic Halogen-free: Yes Thread length: 9.5 mm Thread type: metric Colour: light grey

Counter troughs for Hammerfuß®-Bügelschellen Material: Polypropylene. Halogen-free. Color: black. Independently of the rail, universally usable by pushing on a leg of the stirrup. UV resistant. MVE: 1 piece. Cable Ø: 8 - 12 mm

Counter troughs for Hammerfuß®-Bügelschellen Material: Polypropylene. Halogen-free. Color: black. Independently of the rail, universally usable by pushing on a leg of the stirrup. UV resistant. MVE: 1 piece. Cable Ø: 12 - 16 mm

Counter troughs for Hammerfuß®-Bügelschellen Material: Polypropylene. Halogen-free. Color: black. Independently of the rail, universally usable by pushing on a leg of the stirrup. UV resistant. MVE: 1 piece. Cable Ø: 52 - 58 mm

Ring shape insulated ring shape according to DIN 46234 and similar, for conductors according to WDE 0295 class 2 (multi-wire conductor,) 5 (flexible conductor) and 6 (high-flexible conductor,) Cu-ETP according to DIN EN13599, soldered, galv. Sn, heat resistant to +125°C, suitable tool: Art. No. 05104229. MVE from 10 mm2: 1 piece nominal cross-section from/to: 16.0 - 16.0 mm2 thread M: 6

DL AC 400 W, DC 250 W, electr. Characteristics according to DIN WDE 0636-3, gg - Full range protection for general use, cable and cable protection, max. AC 50ka, DC 8kA, Dimensions: Ø13, L=36 mm, E16, Ø Foot contacts: PSI DL 6A, PSI DL 10A: 8 mm, PSI DL 16A: 10 mm, PSI DL 20A: 12 mm Rated current: 10 A

Diaphragm sleeve 2 Components Polypropylene / thermoplastic elastomer, dustproof, for use with mating nut or in existing thread, silicone-free, plug-in length: 9.5 mm, glow wire test: 750° nominal size: M 16 cable-Ø: 1 - 9 mm protection type (IP): IP66 Material: plastic Halogen-free: Yes Colour: light grey

Wiring bridges AE/AE. For wiring of LS,- FI,- and similar switching devices. For example, for installation small distributors and counter positions according to WDE 0603. EN 60439-1 / WDE 0660, part 500. WDE 0100, part 523: 6 mm2: max. 54 A, 10 mm2: max. 73 A. Rated voltage: 450 / 750 W. Insulation material: PWTSC (type of lead H07V-K). Head: Flexible. Cable end: Aderend sleeve on both sides. Color: black. Length: 133 mm cross-section: 10 mm2

Device connection box for the wall connection of electric stoves and similar applications (transition of rigid wiring to flexible wiring). Snap lid. Clamps with color coding corresponding to valid vein colors. VDE 0606-1 / EN 60670-1, 2005-10 and VDE 0606-22 / EN 60670-22, 2007-07. Cross-section: 5 x 25 mm2. PHAD: Double cable outlet. Line connection: feed line: max. 4 mm2 rigid/multiplier; outlet: max. 2,5 mm2 with a core end sleeve; Screw connection (jack clamp). Number of clamping points: 5. Mounting: In standard switch box ø 60 mm, PHAD alternative screw fastening on plaster. Touch protection: fingerproof IP20. Safety: corners rounded assembly type: plaster/underput