List of products by brand ABB

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

ABB Phase rails enable secure and economical cross-wiring of automatic fuses, fault current protection devices and other modular installation devices. The following must be taken into account for a correct phase rail selection: terminal type (double terminal or cage terminal), number of terminals (1, 2, 3, 4, 1+N or 3+N), type of device (automatic, fault current protection devices or modular installation devices), combinations of the different types of device, use of automatic fuses with auxiliary switches mounted on the right and the bottom, phase rail connection cross-section (current loadability), number of modules (extractable phases)

Safe and reliable: Highest degree of insulation IP20, gag lock, pluggable connections. User-friendly. Multifunctional: Mounting the remote drive on both sides possible, A device type for all main functions, remote triggers and undervoltage triggers, auxiliary functions. Easy to install: Both pin and fork connections can be used, high tightening torque 4.5 Nm, Generously dimensioned connection terminals cable protection switch 35mm2.

Modular sockets enable the connection of devices, tools or electrical and electronic non-modular equipment in construction and industrial circuit boards. The product group contains standard versions and extended versions with additional features such as light detectors and hinged lids. The sockets are available in different country standards.

The automatic safety devices of the S 200 series protect cables and cables from overload and short circuit according to DIN WDE 0100-430 and DIN WDE 0100-530. They meet the construction requirements DIN WDE 0641-11 and IEC/EN 60898-1, DIN WDE 0660-101 and IEC/EN60947-2 and UL1077. Their patented connection terminal ensures easy and secure contacting and handling by means of a printing plate. For better visibility conditions during wiring, the connection opening for lines lies above the connection opening for the phase rail. Conductor cross sections up to 35 mm2 can be connected directly to the device via the connection terminal with insulation in protection class IP20. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the S 200 fit for worldwide use. Each device is subjected to three-fold intensive tests on quality and performance before delivery.

Modular sockets enable the connection of devices, tools or electrical and electronic non-modular equipment in construction and industrial circuit boards. The product group contains standard versions and extended versions with additional features such as light detectors and hinged lids. The sockets are available in different country standards.

4-pole contactor ESB25..N with 36 mm width control 3-phase loads up to 25 A and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely bruised and quiet when switching. An auxiliary switch, which can be installed on the left side as an accessory, as well as plombier caps and a spacer supplement the range. ESB25..N have installation design and meet, among others, the EN61095 household standard, they are therefore particularly suitable for distribution installation.

4-pole contactor ESB25..N with 36 mm width control 3-phase loads up to 25 A and are available in different contact conditions and coil voltages. They switch electrical heaters, water heaters, pumps, ventilation and other drives as well as lighting. They operate both with AC and DC control voltages through an integrated coil circuit. The devices are therefore absolutely bruised and quiet when switching. An auxiliary switch, which can be installed on the left side as an accessory, as well as plombier caps and a spacer supplement the range. ESB25..N have installation design and meet, among others, the EN61095 household standard, they are therefore particularly suitable for distribution installation.

Stairlight timers with relapse delay are actuated by buttons, often equipped with a glow lamp. The shift levers are designed for a Glimm lamp current up to 150 ma and are therefore excellently suited for systems in multi-storey buildings. The stairlight time switch with falling-back delay E 232-230 has an electromechanical time relay with synchronous motor drive, with which a high operational reliability in each installation position is ensured. The time range can be set in 15-second steps from one to seven minutes. Switchable after 30s. The multifunctional devices of the product series E 232E-230 Multi 10 and E 232E-8/230 Multi 10 have 10 functions that can be set on the device front.

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

Motor protection switch MS116 with thermal and electromagnetic protection stands for the compact and economical series for engine protection up to 15 kw (400 W) with a module width of 45 mm. The temperature-compensated device has a rotary handle operation with a clear switching position indicator I/0. The rotary handle can be locked in the 0 position by means of a closing device. Auxiliary and signal contacts as well as undervoltage and working current triggers can be installed without tools. 3-phase rails for 65 A or for 100 A and feed-in blocks for 25 mm2 or 35 mm2 permit the joint feeding of several motor protection switches. Protective housing as well as accessories for control cabinet and door mounting supplement the range.

The UK600 series electrical circuit distributors are designed for under-put assembly. They convince with many new and unique technical features. Thus, an up to 200 % larger connection space allows easy and efficient installation of the devices. The removable device carrier can be placed in the distributor according to requirements and thus also guarantees a simple installation. Clever details such as the cable entry sliders with integrated terminal receptacles and the variable use in scale or drywalls underline the high flexibility of the distributors. With an optional removable frame, the UK600 is turned to eye-catching and integrated into any environment. The distributions can be used in undercut and hollow wall mounting and have a WDE license plate. Applicable standards: DIN 43871, DIN EN 60670-24, WDE 0606-24

Sealing cap ESB-PLK40/63 prevents unauthorized manipulation of the connection terminals at 40 A and 63 A installation protectors.

Sealing cap ESB-PLK24 prevents unauthorized manipulation of the connection terminals at 24 A and 25 A installation protectors.