List of products by brand ABB

For controlling a maximum of four 230 W AC independent drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

Records up to 4 pluggable modules. It controls its function and communicates as a bus participant. Any module type can be inserted into each slot. Manual operating device for testing the module function.

forms the interface between KNX installations and IP networks and works according to the KNXnet/IP specification (tunneling). With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and for other clients (e.g. visualizations). The IP address of the IPS/S can be set or received by a DHCP server. The power supply is via 12..30 W DC or alternating via Poe to IEEE 802.3af Class 1.

The following values are output via a seven-segment display with up to 7 digits: active energy (class 1) and reactive energy (class 2) for import and export, power, currents, voltages (L-L; L-N), frequency, cos phi, power factor and apparent power, both per phase and total. The communication can take place via the integrated infrared interface for connecting a KNX module. The energy meter has 2 fixedly configured inputs and outputs. The output can optionally be used as a pulse output for outputting the active or reactive energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The inputs serve to control the tariffs or to count external pulses. The resettable intermediate counter allows the measurement of individual intervals. In addition, the counter records up to 4 tariffs. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.

The following values are output via a seven-segment display with up to 7 digits: active energy (class 1), power, currents, voltages (L-L; L-N) and frequency, both per phase and total. The communication can take place via the integrated M-bus interface or via the infrared interface for connecting a KNX module. The energy meter has an output. This can optionally be used as a pulse output for outputting the active energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.

For controlling thermoelectric actuators in heating/cooling systems at 24...230 W AC. The outputs are short-circuit and overload-proof and can be controlled by manual operation during commissioning.

REG devices for switching and dimming via ABB i-bus® from 2, 4 or 8 independent lamp groups from electr. Switching devices with 1-10V control interface. With potential-free load relays (16A-AC1) the supply voltage of the ballasts can be used per channel via ABB i-bus® or manually turn on and off. Switch state indicator available. No power supply required.

The media distributors of the UK600 series are designed for under-put assembly. They convince with many new and unique technical features. Thus, an up to 200 % larger connection space allows easy and efficient installation of the devices. Through the generous space, all conceivable devices such as routers or other media modules find their safe place. Modular perforated plate mounting plates allow easy installation of the devices and an integrated rotatable 3-way socket ensures the power supply. With an optional removable frame, the UK600 is turned to eye-catching and integrated into any environment. The distributions can be used in undercut and hollow wall mounting and have a WDE license plate. Applicable standards: DIN 43871, DIN EN 60670-24, WDE 0606-24

Fault current protection devices (Rccbs) offer personal and property protection as well as protection against electrically ignited fires according to DIN WDE 0100-410 and DIN WDE 0100-530. The F200 series fault current circuit breakers ensure protection with sinusoidal alternating currents and pulsating currents with a smooth DC fault current proportion of up to 6 ma against ground. As well as fault protection (protection in indirect contact) and fire protection (with I?n = 300 ma). They meet product standards IEC/EN 61008-1, 61008-2-1, 61543 (WDE 0664 10, 11, 30) and F200 A to 100 A UL 1053. Areas of use are household, commercial and industrial applications. The extensive range of accessories offers you everything you need for your installation tasks. Numerous authorisations make the F200 fit for worldwide use. Optimum compromise between safety and operational continuity thanks to the interference resistance against unintentional triggering with impact current strength (shaft current form 8/20 μs) = 5000 A. selectivity with downstream devices with a smaller dimension fault current of, for example, 30 ma (see selectivities tables in the subchapter TECHNICAL details for fault current protection devices (RCDs)).

For switching 4 independent 127 V~/230 W~ consumers. Each contact has an auxiliary voltage-independent manual operation via which the contact position is additionally displayed. The bus connection takes place via the enclosed bus terminal.

Overvoltage protection devices SPD type 2 with the QuickSafe® thermal monitoring are designed for protection in indirect lightning effects and in switching overvoltages. They are built as close as possible to the feed point of the electrical system. All OVR T2 consist of a base part and an interchangeable protection module. They are equipped with a mechanical function display and the TS variants have a potential-free alternating contact. They are compatible with the System per M compact series and can be saved with them via phase rails. Main application in sub-distributions and end circuits.

Switches independent electrical consumers via potential-free contacts 4 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 10AX-AC1 series is particularly suitable for switching ohmic, inductive and capacitive loads, as well as fluorescent lamp loads (AX) according to DIN EN 60669.

For controlling 4 independent blind or roller shutter drives. The outputs are locked against each other. The bus connection takes place via the enclosed bus terminal.

Defective arc protection (AFDD) with FI/LS switch (RCBO) according to IEC/EN 62606 (WDE 0665-10) and IEC/EN 61009-1 (WDE 0664-20), IEC/EN 61009-2-1 (WDE 0664-21) provide protection against serial and parallel fault arcs, protection against overcurrent (overload or short circuit), protection against sinusoidal alternating currents; Protection against overvoltage (internal only for AFDD) and protection against electrically ignited fires according to DIN WDE 0100-420. Mandatory areas of application according to DIN WDE 0100-420 are in single-phase AC voltage systems with In = 16 A in sleeping or living spaces of homes and day facilities for children, disabled or old people or barrier-free homes, as well as in rooms or places with fire risk (with special fire risk, fire hazards of plants), predominantly/mainly from combustible building materials (classification of the combustability of building materials). It is recommended to use Afds in rooms with sleeping facilities, rooms or places with a fire-promoting structure and high connection power terminal circuits. In general, the AFDD is also recommended to increase fire protection against electrically ignited fires. LED indicator to identify the cause of triggering. Feeding from above or below as desired, transverse wiring, for example to FI protection switches in the rear terminal area, is possible. Accessory of the system per M compact®. IEC/EN 61009 Icn=6kA. AFDD+RCBO DS-ARC1 is 1polig protected (LS), switching 2polig.

The KNX voltage supply 320 ma generates and monitors the KNX system voltage (SELV). With the integrated throttle, the bus line is decoupled from the voltage supply. The voltage output is short-circuit-proof and overload-proof. The two-color LED indicates the status of the device. The voltage supply has a wide-range input for the supply voltage in the range 85Å265 W AC, 50/60 Hz.