List of products by brand ABB

REG devices for switching and dimming via ABB i-bus® from 2, 4 or 8 independent lamp groups from electr. Switching devices with 1-10V control interface. With potential-free load relays (16A-AC1) the supply voltage of the ballasts can be used per channel via ABB i-bus® or manually turn on and off. Switch state indicator available. No power supply required.

For controlling thermoelectric actuators in heating/cooling systems at 24...230 W AC. The outputs are short-circuit and overload-proof and can be controlled by manual operation during commissioning.

Records up to 4 pluggable modules. It controls its function and communicates as a bus participant. Any module type can be inserted into each slot. Manual operating device for testing the module function.

forms the interface between KNX installations and IP networks and works according to the KNXnet/IP specification (tunneling). With the ETS, KNX devices can be programmed via LAN. 5 tunneling servers are available for this and for other clients (e.g. visualizations). The IP address of the IPS/S can be set or received by a DHCP server. The power supply is via 12..30 W DC or alternating via Poe to IEEE 802.3af Class 1.

The following values are output via a seven-segment display with up to 7 digits: active energy (class 1) and reactive energy (class 2) for import and export, power, currents, voltages (L-L; L-N), frequency, cos phi, power factor and apparent power, both per phase and total. The communication can take place via the integrated infrared interface for connecting a KNX module. The energy meter has 2 fixedly configured inputs and outputs. The output can optionally be used as a pulse output for outputting the active or reactive energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The inputs serve to control the tariffs or to count external pulses. The resettable intermediate counter allows the measurement of individual intervals. In addition, the counter records up to 4 tariffs. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.

The following values are output via a seven-segment display with up to 7 digits: active energy (class 1), power, currents, voltages (L-L; L-N) and frequency, both per phase and total. The communication can take place via the integrated M-bus interface or via the infrared interface for connecting a KNX module. The energy meter has an output. This can optionally be used as a pulse output for outputting the active energy or as an alarm output. Up to 25 alarm values (swell values with time delay) can be set here. The counter is calibrated according to MID and approved according to IEC. The installation width is 4 DIN modules.

For controlling a maximum of four 230 W AC independent drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

Switches independent electrical consumers via potential-free contacts 4 ABB i-bus®. The manual operation of the contact is possible for each output. The switching state of the contact is displayed. The 16A-AC1 series is suitable for switching ohmic, inductive and capacitive loads.

For controlling a maximum of four 230 W AC independent drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

Power supply with integrated throttle. Fast diagnosis by LED display for operational readiness and fault. The bus connection takes place via the enclosed bus terminal.

The KNX voltage supply 640 ma generates and monitors the KNX system voltage (SELV). With the integrated throttle, the bus line is decoupled from the voltage supply. The voltage output is short-circuit-proof and overload-proof. The two-color LED indicates the status of the device. The device has an additional short-circuit-proof and overload-proof 30 W DC voltage output. This can be used for feeding a further bus line (in conjunction with a separate throttle). The voltage supply has a wide-range input for the supply voltage in the range 85Å265 W AC,50/60 Hz.

The DALI USB interface between PC (USB) and DALI,Supply: from DALI line and USB interface,Power consumption: ma 6 (DALI line),Inputs: USB (Personal Computer) 1,Outputs; DALI 1,temperature: permissible ambient temperature 0-50°C

To control a maximum of four independent 24 W DC drives for positioning blinds, roller shutters, awnings and other hangings as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

For controlling a maximum of four 230 W AC independent drives for positioning blinds, roller shutters, awnings and other hangings, as well as for controlling doors, windows and ventilation flaps. With automatic driving time determination and manual operation directly on the device. No auxiliary voltage required. The outputs are interlocked electromechanically. Functions: On/off, lamella adjustment/stop, position and scene control, safety functions, sun protection and heating/cooling automatic, status messages.

The device records eight AC/DC signals in the voltage range of 10...230 V. The input state is displayed over 8 yellow LED’s. The binary inputs allow the detection of 8 independent input signals. Each channel has a button for manual operation. The devices are used by ABB i-bus® supplies and does not require additional power supply.