List of products by brand OBO BETTERMANN

200 pieces steel hardened, galvanized and yellow passivated and hostaflon coated. Senkkopf with cross slot (Pozidrive Gr. 2 except Ø 6 mm Pozidrive Gr. 3). The use of the SPRINT screws leads to considerably shortened screw-in times compared to conventional screws. This appreciable advantage is affected by the gripping tip with the 1st gear, which leads to the 2 running thread. Applications: wood, chipboards, rigips plates, plastic dowels.

Screwless clamp for connecting conductors, tested according to EN 60998. The conductor type can optionally be flexible, polygonal or rigid. When using rigid conductors, it is not necessary to open the release lever. The conductor can be inserted directly into the terminal. To hoist the conductors simply open the release lever. The vein can be pulled out easily. The stripping length is 9 mm (+1 mm). The test opening is located on the upper side of the clamp, thereby having a very good access with the phase tester and test pin (max. Ø 2 mm). The maximum permissible ambient temperature according to EN 60998 is 85°C.

Channel bottom with bottom hole for direct wall mounting. The top is to be ordered separately.

20 piecesGrid trough corner connector for creating grid trough arch elements of individual size on site, including flat round screw and combination nut.

SurgeController upper part VDE-tested, plug-in upper part, upper part without tool to separate from the lower part, including thermal and dynamic, severing device and optical defect display, high current conductivity with long service life

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 16 x M32 8 x M40 seals, or the seals were cut in with a knife at the intended locations to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 267x182x110 Cover with labeling field and sealable.

Protection class IP54, rated voltage 660 V, nominal cross section mm2, 2 fastening holes for screws up to 6 mm Ø on the outside of the box, 4 lid screws, 10 breakable inserts with thread M20 x 1,5, preferably for cable fittings with short connection thread. Dimensions: 136 x 111 x 57 mm lights internal dimensions: 125x100x44 by mm.

The V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The SurgeController is particularly suitable for potential equalization in main and lower distributions, depending on the type in the area of TN networks. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

Counter nut according to DIN 46319, with metric thread according to IEC 423 100 pieces.

100 pieces ceiling hook with rolled wood screw thread.

Channel bottom with bottom hole for direct wall mounting. The top is to be ordered separately.

Corrosion-protection binders for covering surface and underground compounds. It consists of petrolatum-coated synthetic fibre fleece with a material thickness of about 1.1 mm. The anti-corrosion binding can be processed cold.

Flat round screw with square extension including combination nut.

Connection module Kat. 6, with an RJ45 slot. Includes an EMC hood, a dust protection cap, a cable tie and a mounting instructions. Suitable for installation in DTG-2RM and DTS-2RM data carriers.

25 pieces pack hollow wall instrumentedosis. Dimensions according to DIN 49073-1, for plate thickness 7-35 mm. Standard combination distance 71 mm, possibility for wiring with the aid of connection connectors for combinations between device cans and device connection cans, 8 openings for NYM lines, data lines and pipes Ø 20 mm Device cans can also be used as connection cans according to VDE 0606-1 with double screw fastening and screw cap, protection class IP30.