List of products by brand OBO BETTERMANN

PYROSIT NG 2-component fire protection foam in cartridge, including 2 mixing tubes. To create cable and combination enclosures processing with cartridge guns FBS-PH or FBS-PA.

With threaded rod, U-disc and hexagonal nut axis made of brass 50 pieces.

The V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44). A dynamic separation device and optical status display characterize the modularly pluggable arresters. The SurgeController is particularly suitable for potential equalization in main and lower distributions, depending on the type in the area of TN networks. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

Set iron with hand protection for OBO dowels 903/RB Ø 4 mm.

sliding nut for use with profile rails CM3015, CM3518 and AM3518 100 pieces

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

To attach components to plasterboard or fiber composite panels. Mind. Plate thickness: 12 mm 100 pieces

Mounting for general use with mounting holes 6 mm Ø, suitable for wall and ceiling mounting. The injection-molded fastening element can be fastened with impact dowel or gas pressure nail device. The recommended fixing distance with full occupancy is 50-60 cm.

100 pieces plasterboard screw Ø6x25, Zn 3483239To attach components to plasterboard or fiber composite panels. Min. plate thickness: 5 mm

Fire galvanized flat round screw with square attachment including galvanized combination nut. For universal fastening of construction components. Use of the article only in dry atmospheres.

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

The upper part of the V20 overvoltage arrester made of halogen-free plastic is suitable for overvoltage protection potential compensation according to VDE 0100-443 (IEC 60364-4-44) and serves as a substitute for the V20 SurgeController. A dynamic separation device as well as an optical status display characterize the modularly pluggable arresters. Thanks to the high performance varistors, the leakage capacity is up to 40 kA (8/20) per pole. The vibration-proof latching and the voltage and type coding ensure safety and avoid confusion between upper and lower parts. The wedge-shaped design of the contacts allows simple insertion and even simpler removal of the upper parts. Additional technical product information can be obtained quickly and easily via the QR code applied to the power shield.

Steel hardened, bare without thread. 200 pieces.

potential compensation rail according to VDE 0618, part 1 suitable for potential compensation according to DIN VDE 0100-410/-540 and flash protection potential compensation according to DIN VDE 0185-305. The clamping rail 10 x 10 mm consists of nickel-plated brass, the contact-proof terminal blocks made of galvanically galvanized steel, the cover hood and the rail blocks made of gray polystyrene. The cover hood is plombable / inscribable. The potential compensating rail is capable of energizing up to 100 kA (10/350) and has a tie bar with screw securing against self-lockers (e.g. required in industry and ex areas). Connection options: 7 single- or multi-wire lines 2.5-25 mm2 or fine-wire lines up to 16 mm2 (max. Ø 7 mm), 2 single or multi-wire lines 25-95 mm2 or fine-wire lines up to 70 mm2 (max. Ø 13.5 mm) and 1 flat conductor 30 x 35 mm.

bumper connectors for gratings in screwed design, for straight connections of grating channels and for the production of molded parts, inclusive flat round screw FRS M6 x 20 with combination nut.