Smoke detector Standard KRIWAN Q, 3V DC, white. Smoke detectors with small size and attractive design language according to DIN EN 14604 with additional certification according to the increased testing requirements of Q certification based on vfdb guidelines 14-01 “Vereinigung zur Förderung des deutschen Brandschutz” (vfdb). Increased test criteria against the penetration of foreign bodies and increased protection against damp heat, oxidation and EMC, as well as better temperature change stress. Serves for early detection signaling fires with smoke development in the interior. Processor-controlled function self-test (all 10 sec.) and PGSA technology with independent algorythmic night-riggering when disturbing influences occur, such as dust, to maintain functional safety. Large function and reset button through the entire upper cover of the detector. Acoustic signal (85 dB at 3 m) and red flashing LED for alarming. Acoustic signal for battery wake, pollution or interference with acoustic signaling and yellow LED. Timely limited deactivation function of the smoke detection for suppression of deception alarms of the detector for approx. 12 minutes with automatic reset function in normal operation. Error messages can be delayed by 8 hours for 7 days by acknowledgement on the reset button. The fault of a contaminated detection unit cannot be reset as long as the fault message continues to exist in the evaluation unit. Ceiling mounting or wall mounting according to DIN14676. The detector has a camping/caravan registration. Disassembly and theft protection can be activated, then unlocking only with screw rotation with max. Size of 7mm possible. When turning into the socket, the detector is automatically activated.
Pressure switch 16A 2 closer 230V AC with light indicator grrün 1PLE pressure switch with LED indicator light according to DIN VDE 0632, contact protection according to DIN VDE 0106/100, marking option directly on the device. Nominal current: 16 A Number of modules: 1 Lamp type: LED Rated operating voltage Ue: 230 V Isolation voltage: 250 V Connection type: Screwdriving
Sensor 16A 1 Open 230V AC with light indicator red 1PLE. Sensor with LED indicator lamp according to DIN VDE 632, touch protection according to DIN VDE 0106/100, marking option directly on the device.
Pressure switch 16A 1 Locker 230V AC with light indicator green 1PLE pressure switch with LED indicator light according to DIN VDE 0632, touch protection according to DIN VDE 0106/100, marking option directly on the device. Nominal current: 16 A Number of modules: 1 Lamp type: LED Rated operating voltage Ue: 230 V Isolation voltage: 250 V Connection type: Screwdriving
Summer for DIN rail with protection against short circuit or overload through an integrated thermal switch on the primary side, continuous operation up to 1 hour. Total loss power at rated current:6,5 W
Blade 230V 6,5VA 1PLE Blade transformer with protection against short circuit or overload by integrated thermal switches on the primary side.AC voltage: 230 VNumber of modules: 1Operating temperature: -10 to 40 °CStorage temperature: -25 to 60 °CConnection cross section for flexible conductor: 4mm2Connection cross section for rigid conductor: 6mm2
Blade 8-12V 5VA 1PLEBlade transformer with protection against short circuit or overload by an integrated thermal switch on the primary side. Number of modules: 1 Operating voltage AC: 8/12 V Frequency: 50/60 Hz
16A 250V 2.5PLE socket, QuickConnect socket SCHUKO with increased contact protection according to DIN VDE 0620 for installation in distributor with protection class II for mounting on DIN rail (TS 35) according to DIN EN 60715:2001-09. Rated current: 16 ANumber of modules: 2.5Connection type: plug connectionConnection cross section for rigid conductor: mini 2x1 mm2 - maxi 2x2,5 mm2Height installed product: 75 mmWide installed product: 44 mmDeep installed product: 66 mmRated voltage: 250 V
€11.92
This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Find out more here.