Tool and accessories

Can counter Xpress with suction For hard concrete products and highly compacted lime sandstone (quadroblock) etc. (Xpress, color guide system: black,) radius slots in the cover for dust extraction, laser welded segments, thread mount M16 for use in drill hammers with SDS-Plus / TE-C mount, Note: By selecting the right drill bit to the existing material, the service life of the diamond segments can be significantly increased! Please note: Can plugs are to be used without hammering when drilling! Ø: 82 mm Working depth: 65 mm Suitable for use with impact: No With centering drill: No

Special pliers for perforations of paper and thin plastic, for easy marking of test plaques, shape: triangle, jaw depth: approx. 50 mm, nickel-plated length: 145 mm

4-cutting hammer drill SDS-Max Quick penetration into hardest concrete, spiral construction (KVS,) symmetrical 4-cutting head construction (one main cutting, two secondary cutting,) central guide in the drill hole, minimized friction in the drill hole, drill dust removal by the large dimensioned drill dust grooves of the double conveyor spiral, dynamic core reinforcement, for modern drill hammers of class 5. 150 mm deep pre-drilling, for concrete, masonry, natural stone, Note: Ø 12 Ö 15 mm 2-spindle, from Ø 16 mm 4-spin diameter: 32 mm cutting length: 450 mm Total length: 570 mm

Fiber Optic Replacement Tape For PKE cable draw-in and PKES cable draw-in system for cable draw-in set: 05101635 Length: 50 m

Can counter Xpress with suction For hard concrete products and highly compacted lime sandstone (quadroblock) etc. (Xpress, color guide system: black,) radius slots in the cover for dust extraction, laser welded segments, thread mount M16 for use in drill hammers with SDS-Plus / TE-C mount, Note: By selecting the right drill bit to the existing material, the service life of the diamond segments can be significantly increased! Please note: Can plugs are to be used without hammering when drilling! Ø: 68 mm Working depth: 65 mm Suitable for use with impact: No With centering drill: No

4-cutting hammer drill SDS-Max Quick penetration into hardest concrete, spiral construction (KVS,) symmetrical 4-cutting head construction (one main cutting, two secondary cutting,) central guide in the drill hole, minimized friction in the drill hole, drill dust removal by the large dimensioned drill dust grooves of the double conveyor spiral, dynamic core reinforcement, for modern drill hammers of class 5. 150 mm deep pre-drilling, for concrete, masonry, natural stone, Note: Ø 12 Ö 15 mm 2-spindle, from Ø 16 mm 4-spin diameter: 20 mm cutting length: 800 mm Total length: 920 mm

Spare rod set 8 mm replacement set for PSCH push rod set. Push rods made of glass fiber reinforced plastic. Replacement set contains 3 push rods Ø 8 mm length 1 m Material: glass fiber

Spare rod set 6 mm replacement set for PSCH push rod set. Push rods made of glass fiber reinforced plastic. Replacement set contains 3 push rods Ø 6 mm length 1 m Material: glass fiber

Hammer hollow drill bit with inner cone multi-part tool system, suitable in drill hammers with SDS-Max receptacle, drill powder helix reduces friction and increases the service life, special teeth made of hard metal for rapid drilling progress even in hardened rock, hard metal DC quality and special soldering methods, adapter takes hammer drill bit and centering drill on roof shape guide teeth for better tool guidance and more running depth 1:. Nominal size: 80 mm

4-cutting hammer drill SDS-Max Quick penetration into hardest concrete, spiral construction (KVS,) symmetrical 4-cutting head construction (one main cutting, two secondary cutting,) central guide in the drill hole, minimized friction in the drill hole, drill dust removal by the large dimensioned drill dust grooves of the double conveyor spiral, dynamic core reinforcement, for modern drill hammers of class 5. 150 mm deep pre-drilling, for concrete, masonry, natural stone, Note: Ø 12 Ö 15 mm 2-spindle, from Ø 16 mm 4-spin diameter: 32 mm cutting length: 250 mm Total length: 370 mm

HM multipurpose saws Universally usable in drill hammers with SDS-Plus receiving system, in all drills with 3-oven drilling chucks, hard metal teeth supported on both sides and enlarged soldering surfaces guarantee a secure fit and high-strength material connection, for a wide variety of material use: bricks and gas concrete, plasterboard, Fermacell, plastics, plastic-coated wood, chipboard, plywood

Hammer-resistant drill crown with wear-resistant carbide teeth. Careful, high-strength copper soldering of the teeth. Stable steel body for long service life. 6 impact-resistant hard metal plates ensure a high service life due to their wear resistance. Thread connection M16. At least 600 W from Ø 50 mm. Maximum drilling depth about 50 mm. Suitable for percussion drills (6-edge shaft) and drill hammers with SDS-Plus / TE-C mount. For artificial stone, natural stone, masonry. Version: Set - SDS-Plus Dimensions: Ø 82 mm

6-piece conical box. In impact- and break-resistant ABS box. 90° 3-cuts. HSS (DMO5) - steel. Hardness at the cutting part = 64±1 HRC / hardness at the shaft min. 45 HRC. CBN-ground cone and deburring scoop. For all common industrial materials. For example: non-ferrous metals, stainless steel sheets, thermoplastic and thermosetting plastics as well as all common steel sheets.

Thread drill box tap drill cartridge 15-part, high quality HSS (DMO5) - steel, hardness at the cutting part = up to d1 = 3.0 mm min. 61 HRC. 3.0 to 6.0 mm at least 62 HRC. About 6.0 mm 63 HRC / hardness on the shaft min. 45 HRC.Gewind: metric DIN ISO 13. Cutting direction: right-hand cutting. Contents: (thickness - incline mm - thread hole - total length - thread length): M 3 - 0.50 - 2.50 - 40 - 10 M 4 - 0.70 - 3.30 - 45 - 12 M 5 - 0.80 - 4.20 - 50 - 13 M 6 - 1.00 - 5,00 - 50 - 15 M 8 - 1.25 - 6.80 - 5650

Precision cutter made of high-performance CrV steel (40 HRC,) hard-milled and inductive feed hardened, cutting hardness approx. 60 HRC, double eccentric adjustment, knives can be set independently of one another, reinforced pipes for high loads, ergonomic handle, as well as grip safety by positive fit, anti-slip protection front and rear, weight: 1.7 kg Suitable for cutting gratings: Yes cutting knives replaceable: Yes Total length: 460 mm Suitable for max. Bolt diameter: 7 mm