Tool and accessories

Replacement belt for cable intake systems. Suitable for PK67xxE. Fiberglass with 2 initial sleeves M8, 1 initial bulb Ø18 mm and 1 skull. Colour: yellow Length: 60 m

Cable retractor Pocket Ø: approx. 25 cm. Weight: approx. 1 kg. Edge height: approx. 50 cm. Removable dome for receiving the drum with a small inner diameter (from about 13 mm). Material: polyamide load: 190 kg

Tool Case Basic high impact ABS hard shell case, 2 tool plates with insert compartments, 2 lockable metal tipper, variable bottom shell, internal dimension: 460 x 315 x 169 mm, external dimension: 490 x 365 x 188 mm,weight: 4.5 kg, Max. Loading: 25 kg Version: empty

Suitable for applications behind drywalls, suspended ceilings, under floors and wherever there are no cable shafts, empty pipes or other cable guides. Push rods are made of a glass fiber reinforced plastic. The push rods can be extended as desired by means of threaded sleeves. The different push rods allow different bending radii. Cables, cables can be pushed or pulled. In the set are included. 3 push rods Ø 8 mm, length 1 m, 2 push rods Ø 6 mm, length 1 m, initial bulb, pull eye, hook, chain, magnet, adapter M6 on M5 Material: glass fiber

Scope of application: non-insulated cable shoes with closed crimp sleeve (W-Pressure) up to 16 mm2 / AWG 6: DIN 46234, DIN 46230, DIN 46341 and tube cable shoes up to 10 mm2 / AWG8, shock connector, ergonomically shaped soft handle with anti-slip, unlockable forced lock, easy handling, surface incubated, Included

Scope of application: red / blue / yellow / insulated cable shoes, pin cable shoes, flack plugs, flat plug sleeves, round plugs, round plug sleeves, shock and parallel connectors. Ergonomically shaped soft handle with anti-slip, easy handling, unlockable forced bead, easy handling, surface incubated, including stripping and cutting insert

Scope of application: non-insulated flat plugs and flat plug sleeves for DIN plug widths F2,8, F4,8, F6,3, F9.5, ergonomically shaped soft handle with anti-slip protection, unlockable forced lock, easy handling, surface incubated, including stripping and cutting insert

Step drill HSS HSS steel (DMO5) polished, scoring: cross-cut grinding according to DIN 1412C, tip angle: 118°, step angle: 90°, surface: bare. 3-point surface for perfect holding of tools in drill chuck Min. Drill-Ø: 6.5 mm Max. Drill Ø: 40.5 mm

Combination scissors For exact right-angle cutting of composite and plastic pipes in a Ø 12 to 25 mm, cutting of corrugation protection pipe on the outside diameter, without damage to the inner pipe, clean, smooth and burr-free cutting surfaces, easy cutting of the protective pipe even in the assembly state by short cutting paths (90°), possibility for attaching a calibrating mandrel, e.g

Mechanical hand-cable scissors Cable scissors for cutting one, multi- and fine-wire cable made of aluminum and copper, lightweight clean cut through new cutter geometry, forged and hardened head, short construction, low weight, For cables up to 150 mm2, Not suitable for wire ropes and steel wire Length: 500 mm

Pelikanschere For cable and baseboards for free cutting of plastic panels, cable channels and baseboards. Cut length of 110 mm and additionally extendable support. Optimum lever ratio, replaceable cutter made of hardened special steel. Version: Channel scissors Cutting: smooth Length: 110 mm

PKSLS8E: Hole saws Ø 22,35,51,57,68,76 mm / Pictures PLSA95, PLSA11 (Electricians) Content PKSLS9S: Hole saws Ø 19,25,32,38,44,57,68 mm / Pictures PLSA95, PLSA11 (Sanitary) Total number of tools: 8

PKSLS8E: Hole saws Ø 22,35,51,57,68,76 mm / Pictures PLSA95, PLSA11 (Electricians) Content PKSLS9S: Hole saws Ø 19,25,32,38,44,57,68 mm / Pictures PLSA95, PLSA11 (Sanitary) Total number of tools: 9

4-cutting hammer drill SDS-Max Quick penetration into hardest concrete, spiral construction (KVS,) symmetrical 4-cutting head construction (one main cutting, two secondary cutting,) central guide in the drill hole, minimized friction in the drill hole, drill dust removal by the large dimensioned drill dust grooves of the double conveyor spiral, dynamic core reinforcement, for modern drill hammers of class 5. 150 mm deep pre-drilling, for concrete, masonry, natural stone, Note: Ø 12 Ö 15 mm 2-snow, from Ø 16 mm 4-snow diameter: 35 mm cutting length: 450 mm Total length: 570 mm

For the time-saving laying of cables in pipe systems, Max. Tensile load capacity: 200kg, Material: twisted monofilament (break-proof,) Diameter: 4.5 mm, Band thread: M5 thereby compatible with the existing accessories of 3 mm and 4.5 mm glass fibre band, Content: 1 Spring guide head 11 mm, 1x Tensile M5, 1x cable pull-in stock 6-9 mm, Dimensions box: 24x30x7 cm