Best sellers

for concrete installationfor the production of precise insertions for cables and pipeswith PCB ejectorStamping inserts replaceableDIN EN Tube Ø: 20 mm

Kleinverteiler aus hochwertigem Thermoplast (Polystyrol). Für Aufputz-Anwendungen in Gebäuden oder der geschützten Installation im Freien. Automatengehäuse, mit 54 Teilungseinheiten, zum Einbau von Geräten mit Schnappbefestigung auf DIN-Tragschiene. Kabeleinführung über integrierte elastische Dichtmembranen. Mit transparenter Tür und Kabeleinführungsblende, integriertem Zubehörfach und Abdeckstreifen für den Geräteausschnitt. Schutzart IP 54.

small distributor, vector, APV, IP65, 36PLE, with small distribution channel; Installation small plastic distributor, according to DIN VDE 0603 part 1, according to DIN 43871. For installation of devices up to 63 A according to standard DIN 43 880 with 70 mm or 85 mm installation depth, measuring voltage AC 400 V/50 Hz. Consisting of plastic base with galvanized steel profile rail, embossing for metric line insertion sleeves (top, bottom); lateral embossings for connecting sleeves for connecting two or more distributors side by side. Built-in PE/N clamps quick connector; Top with 46 mm slot. Clear view door front flush, right or left adjustable, lockable, distributor flangeable.Assembly type: plaster / construction Protection class: Protection class II Number of distribution rows: 2 Number of modules: 36

Number



4



Measurement voltage


V
400



Rated current


A
40



Measurement error current


A
0.1



Assembly type



DIN rail



Error current type



A



Selective type



yes



Short-circuit strength (Icw)


KA
10



Impact resistance


KA
5



Frequency



50 Hz



Additional equipment possible



yes



Type of protection (IP)



IP20



Size (according to DIN 43880)



1



Width in division units



4



Installation depth


mm
ANNEX



Short-term delayed type



no

Fire protection switch-LS-combi 230V, 6kA, 1+N, B, 13A Compact (1TE) The FI switch is the fault current protection device for contact protection The patented fault current protection devices of Siemens are an important part of the SENTRON protection components for electrical installation, because they prevent life-threatening current accidents due to safe disconnection of dangerous fault currents against Earth. Electrically ignited fires can already be prevented from arising. Whether by direct stirring of parts which are subject to stress in terms of operation or by indirect stirring of operating means, the protection is achieved above all by rapid switching off. The Siemens FI protection switches 5SV are characterized primarily by: 1. Comprehensive protection for persons and property values against electrical impact. 2. Whether sinusoidal alternating fault currents or smooth direct fault currents - Siemens offers the right type for all requirements and special designs. 3. Reliable safety during installation thanks to the standard protection of grip and touch. 4. Toolless release from the hat rail or from the busbar composite by comfortable slide-hand actuation. 5. Datamatrix code on the front of the device provides quick and easy all information about the FI circuit breaker. 6. Be protected as standard: The fault current protection switches correspond to the requirements of DIN VDE. 7. Optimum technology for your safety - only from Siemens. www.siemens.de/fault current protection. Siemens provides a comprehensive portfolio of protection, switching, measuring and monitoring equipment, distribution systems and switches and sockets for safe, efficient electrical infrastructure in buildings and industry.

Electrical power meter Maximum power 3x80A, Stand-by-loss only 0.5 Watt per path, Row-mounting device for mounting on support rail DIN-EN 60715 TH35 in installation cabinets with protection class IP51, 4 division units = 70 mm wide, 58 mm deep, accuracy class B (1)%, with S0 interface, which measures directly measuring rotary power meter

Design of poles3 + N / PRated leakage current (8/20)KA20Rated voltage ACV335Rated voltage DCV0Maximum permanent voltage ACV335Highest continuous voltage DCV0Max. PV voltageV0Protection levelKV1.6Protection level L-NKV0Protection level N-PEKV0Short circuitnoAssembly typeHat rail 35 mmSize4 THEMax. Conductor cross-section rigid (one/multiple)mm225Max. Conductor cross section flexible (fine)mm20With telecommunication contactnoIntegrated PreservationnoSignaling on the deviceopticalTest class type 2yesType of protection (IP)IP20

19 Inch 1HE Module support with 24 E-DAT modules // Cat.6A Component test according to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), GHMT certified // Compliance with class EA 210 x 297 mm see accessories // Grounding bolt M6 x 10 with nut and toothed disc // incl. 30 cm grounding cable // all fully shielded modules connected by grounding railProduct description on the Manufacturer page

FI-Schutzschalter, 4-polig, Typ A, selektiv, In: 63 A, 100 mA, Un AC: 400 V, mit Nennstrom gegen Überlast vorsicherbar

For the protection of consumer equipment against transient overvoltages caused by direct and indirect flashes, as well as switching operations, application according to IEC 60364-5-53 Section 534, test classes I, II according to IEC 61643-1, SPD type T1, T2 according to EN 61643-11, flash protection class III and IV according to IEC 62305, execution without remote message




Net form



TN-C



Design of poles



3



Rated leakage current (8/20)


KA
25



Rated voltage AC


V
280



Rated voltage DC


V
0



Maximum permanent voltage AC


V
280



Highest continuous voltage DC


V
0



Max. PV voltage


V
0



Protection level


KV
1.5



Protection level L-N


KV
0



Protection level N-PE


KV
0



Short circuit



no



Assembly type



Hat rail 35 mm



Size



THREE TEA



Max. Conductor cross-section rigid (one/multiple)


mm2
25



Max. Conductor cross section flexible (fine)


mm2
0



With telecommunication contact



no



Integrated Preservation



no



Signaling on the device



optical



Test class type 2



yes



Type of protection (IP)



IP20

Number2Measurement voltageV230Rated currentA40Measurement error currentA0.03Assembly typeDIN railError current typeASelective typenoShort-circuit strength (Icw)KA10Impact resistanceKA3Frequency50 HzAdditional equipment possibleyesType of protection (IP)IP20Size (according to DIN 43880)1Width in division units2Installation depthmmANNEXShort-term delayed typeyes

PVC Mantelleitung Verwendung: Für feste Verlegung in trockenen, feuchten und nassen Räumen. Nicht geeignet für die Verlegung im Freien oder in Beton.

erweiterbar um 4 bzw. 8 Teilnehmer mit MSK54G oder MSK58G hohe Störstrahlsicherheit lange Lebensdauer durch optimale Wärmeableitung Für Wand- und Hutschienenmontage LNC - Spannungsversorgung durch Netzteil Ausgleichsverstärkung SAT und terrestrisch Umgebungstemperatur -20 ... +50° C Alle nicht benötigten Ausgänge mit Widerstand FR 75 abschließen Kurzschlusssicher Passender SAT - Verstärker MSV 411G ( 3,5...9,5dB) Passender SAT - Verstärker MSV 511G ( 3,5...9,5dB) Terr. - Verstärker MSV 511G ( 6...10dB) Passender Basisverstärker SAT MSV526NG (20...26dB) Terr. MSV526NG (26dB)