OBO

End piece for closing the WDK channel ends.

potential compensation rail for potential compensation according to DIN VDE 0100-410/-540 as well as lightning potential compensation according to DIN VDE 0185-305. Base plate and cover made of polystyrene, grey, cover hood plombable / inscribable, contact strip made of brass, nickel-plated, steel screws and cantilever, galvanically galvanized, flash current-bearing 50 kA (10/350). Connection options: 7x single- or multi-wire lines up to 25 mm2 or fine-wire lines up to 16 mm2, 1x round conductor Rd 8-10, 1x flat band to FL30 or round conductor Rd 8-10.

Adhesive clamp suitable for pipes with 3/8 to 4 inches diameter. The clamp body, the screws and the clamping strap are made of stainless steel (VA). Connections: max. 2 lines 2,5-25 mm2. RD 8.

Rain pipe clamp - For laying round conductors directly behind the rain pipe - With bead - For round conductor Rd 8-10 - Incl. Hexagonal screw M6 x 20 and mother M6 for tube: 100 Material: Aluminium Weight: 4.1 kg/100 pcs Type: 301 S-AL-100 Art.-Nr.: 5351359

100 pieces 8X40 GRW Angler-Spreizdübel 8x40mm, PA, grey-white, 9002 2349086Required minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5-fold

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall.

Hole band in corrugated form, in practical unrolling box.

The mating nuts meet the requirements according to DIN 46319 and have a metric thread according to IEC 423.

Required minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5-fold 25 pieces

Connecting sleeve with double thread.

Connecting sleeve - With 4 hexagonal screws M6 x 10 Fitting: Rd 8-10 Material: Steel Weight: 8.56 kg/100 St Type: 237 N FT Art.-Nr.: 5328209

Device box for mounting devices with support ring.

Erderspitze suitable as a tip for system ST and BP.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 7 x M25 seals, or the seals are cut in with a knife at the intended points in order to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 100x100x48 Cover with labeling field and sealable.

End piece for closing the GEK-K device installation channels.