OBO

Cross connector with 4 hexagonal screws M6 x 16 (VA) Fitting: Rd 8-10 Material: Steel Weight: 11.69 kg/100 St Type: 251 8-10 Art.-Nr.: 5312035

Belt clamp suitable for pipes of 8 to 22 mm diameter. The clamp body and the screws are made of nickel-plated brass, the stainless steel strap (VA). Connections: max. 2 lines 2.5-10 mm2.

Threaded rod according to DIN 976, universally applicable for fastening and connection of construction and construction parts. Within the framework of the standard constructions for the functional maintenance according to DIN 1402 part 12, the threaded rod is often used as a fuse in the wall and ceiling mounting of trays.

Wall and ceiling channel with bottom hole consisting of lower part and upper part for mounting directly on the wall.

Cable holder - With internal thread M8 or. Ø 7 mm - bracket mounted with 2 hexagonal screws - version HD with wood screws (5 x 60) and plastic dowels (8 x 40) Material: Zinc die casting Fit: Rd 8-10 Weight: 6,202 kg/100 pcs Type: 113 Z8-10 Art.-Nr.: 5229960

Connection clamp - With fixed contact clamping screw, nut and fan disk - With bore 10.2 mm - With pre-assembled pressure piece made of zinc die casting - meets the requirements according to DIN EN 62305-3 Fitting: Rd 8-10 Material: Steel Weight: 7.45 kg/100 pcs Type: 5001 DIN-FT Art. No.: 5304105

Erderspitze suitable as a tip for system ST and BP.

End piece for closing the GK device installation channels.

Angler spreader plug 5x25mm, PA, grey white, 9002 2349043 100 piecesRequired minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5-fold

Required minimum screw length = dowel length + component thickness + 1 x screw Ø. Extraction value applies to wood screws with the largest screw diameter in the concrete of class B25. Our security rating recommendation: 5 times 50 pieces

Tape clamp suitable for pipes of 3/8 to 11/2 inches diameter. The clamp body, the screws and the clamping strap are made of stainless steel (VA). Connections: max. 2 lines 2,5-25 mm2. RD 8.

End piece for closing the GEK-K device installation channels.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 7 x M25 seals, or the seals are cut in with a knife at the intended points in order to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 100x100x48 Cover with labeling field and sealable.

Erderspitze suitable as a tip for system ST and BP.

Device box for mounting devices with support ring.