OBO

20 piecesGrid trough corner connector for creating grid trough arch elements of individual size on site, including flat round screw and combination nut.

End piece for closing the GK device installation channels.

Clamp for fastening gratings on wall or handle booms, inclusive flat round screw FRS M6 x 20 with combination nut.

bumper connectors for gratings in screwed design, for straight connections of grating channels and for the production of molded parts, inclusive flat round screw FRS M6 x 20 with combination nut.

bumper connectors for gratings in screwed design, for straight connections of grating channels and for the production of molded parts, inclusive flat round screw FRS M6 x 20 with combination nut.

25 pieces pack hollow wall instrumentedosis. Dimensions according to DIN 49073-1, for plate thickness 7-35 mm. Standard combination distance 71 mm, possibility for wiring with the aid of connection connectors for combinations between device cans and device connection cans, 8 openings for NYM lines, data lines and pipes Ø 20 mm Device cans can also be used as connection cans according to VDE 0606-1 with double screw fastening and screw cap, protection class IP30.

Hammer head screw for profile rail MS 41, with toothing, fixation by 90° rotation.

Universal label for self labeling with waterproof and light-fast felt pen for all OBO partitions. For proper labelling, including 2 plug-in plugs.

Clamp for fastening cable conductors.

The nail anchor N can be used for multiple fastenings of non-supporting systems in torn and uncracked concrete and combines the advantages of a bolt anchor with an even simpler assembly. The nail anchor only needs to be inserted into the hole. The subsequent application of a torque is not necessary. When the load occurs, the nail anchor spreads independently and anchors in the borehole. European Technical Approval ETA-11/0240, including characteristic values under fire effect up to fire resistance R 120.

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

The Ratelle cable channel system Magic (RKSM) is the world's first completely screwless channel system. The RKSM has a beaded longitudinal bottom hole 7 x 20 mm for boom mounting. From width 200 mm, a cross-sicking improves 7 x 32 mm cable ventilation and facilitates assembly. The center hole 11 mm allows direct threaded rod suspension and a continuous side hole 7 x 20 mm serves as a connector hole. All system components and channel types are equipped with the innovative Magic connector, from the channel to the molding. The combination of both advantages makes assembly easier and more time-saving. The continuous potential compensation is guaranteed without additional components. The Magic longitudinal connector set (to order separately) allows the combination of the Magic cable channels with conventional OBO cable channels of the same width. The magnetic shield attenuation is 20 dB without lid and 50 dB with lid. Tested and approved in functional maintenance systems of classes E30 to E90 according to DIN 4102 part 12. Remove assembly variants and approval data from usability certificates.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 10 x M25 seals, or the seals were cut in with a knife at the intended points in order to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 136x102x57 Cover with labeling field and sealable.

The cable branch boxes consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. Lines can be installed directly through the 7 x M25 5 x M32 seals, or the seals were cut in with a knife at the intended locations to produce an insertion opening for pipes or pipes. Alternatively, cable screw connections can be plugged through the openings instead of the seals and can be constricted from the inside with a counter nut. The cable branch boxes can be equipped with sheet metal screws 3,5x9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: 176x135x67 Cover with labeling field and sealable.

The T-series cable branch boxes are all UV-resistant. They consist of a thermoplastic polypropylene with plug-in seals made of ethylene vinyl acetate EVA. This plastic is soft, that is, it can move. Thus, lines can either be installed directly through the 4 x M25 seals or the seals can be cut in with a knife at intended points in order to produce an insertion opening for lines or for pipes. In addition, cable screw connections can be inserted through the openings instead of the seals and can be constricted from the inside with a mating nut. The cable branch boxes can be screwed onto both an M6 thread and with sheet metal screws 3,5 x 9,5 in openings on the floor mounted on mounting plates. Lights internal dimensions: Ø63x45 mm cover with label field.