Muff technology

Incl. Suitable for copper and aluminum conductors, application areas: interior, open air, soil, water and installation equipment etc. Longitudinal and crosswater sealing, good mechanical strength, high-quality transparent, impact-resistant plastic mould shells, immediately ready to use, without cable connectors. Curing time: about 24 hours depending on the outside temperature. Power supply can be switched on immediately after installation of the socket (not to be taken into account). Cable up to mm2: 4 x 10/5 x 6 cable Ø: 7 - 26 mm casting resin: 180 ml

Fast connections of lines, connecting sleeve with clamping insert and cable screw connection, protection: IP68 (5 bar 30 min,). Condensation water formation possible. flame resistance according to EN 60695-2-11, material: polystyrene with flame protection/clamp insert: polyamide glass fiber reinforced, total length: 134 mm or 165 mm, key width SW1: 26 mm or 32 mm, key width SW2: 27 mm or 33 mm, collar diameter E1: 28 mm or. 33.5 mm, flange diameter E2: 29 mm or. 35.5 mm, clamping area (mm2): 5 x (1.5 - 2.5) or 5 x (1.5 - 6,). 10 mm - 18 mm, colour: grey, type of attachment: only for fixed installation in the cable duct or in the suspended ceilings, fixed installation, temperature resistance: -25°C to +60°C, short to approx. +80°C ladder cross-section from/to: 1.5 - 6 mm2 cable up to: 5 x 6 mm2 number of conductors: 5

Hot-shrink connection fittings 0,6/1 kw (1,2kV) For 4- and 5-core plastic-insulated cables, made of high-quality crosslinked polyofin, shrinkage rate 4:1, continuous use temperature -40°C to +120°C, non-corrosive and cadmium-free, color: black, delivery length: 400 mm cable up to mm2: 5 x 6/5 x 25 sleeve length: 500 mm

Non-uniform connection and/or branching sleeve, depending on the clamping type for connections and individual branches of plastic cables and lines from PWTSC, PE, EPR and WPE (for example, N(A)YY, NYM, H05) the gel in the shell takes over insulation and sealing of the connection, tested according to DIN EN 5011)393 (corresponding to type 0239). Main cable: 9 - 16 mm L cross section Main cable: 1x10 - 1x35 mm2 L x B x H: 145 x 70 x 32 mm

Shrink hoses, medium-walled With adhesive inner coating, shrinkage rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm Colour: black Length: 1 m Operating temperature range: -40 - 120 °C With internal adhesive: Yes Shrink rate: 3:1 Shrinkage strength: 40 - 12 mm

Shrink hoses, thin-walled flexible shrink hose. Application: Cable protection, insulation, marking and finishing. Shrink temperature: min. 90°C. Self-extinguishing. Tensile strength: 13 N/mm2. Weight: 1.45 g/cm3. Impact strength: 20 kV/mm. Colour: black. Length: - 05103069 - 05103072: 15 m in the box - 05103073 - 05103075: 10 m in the box - 05103076: 8 m in the box - 05103077: 5 m in the box - 05103078: 3 m in the box nominal diameter in in inches: 3/4 inch inner diameter before - after shrinkage: 19.1 - 9.5 mm wall thickness after shrinkage: 0.77 mm

Shrink tubing, thin-walled flexible shrink tubing, application area: cable protection, insulation, marking and wrapping, shrink temperature: min. 90 °C, flameproof, self-extinguishing, tensile strength: 13 N/mm2, weight: 1.45 g/cm3, impact strength: 20 kV/mm. Color: blue. Length: - 05103079 - 05103082: 15 m in box - 05103083 - 05103085: 10 m in box - 05103086: 8 m in box - 05103087: 5 m in box

Shrink tubing, thin-walled flexible shrink tubing, application area: cable protection, insulation, marking and wrapping, shrink temperature: min. 90 °C, flameproof, self-extinguishing, tensile strength: 13 N/mm2, weight: 1.45 g/cm3, impact strength: 20 kV/mm, color: brown. Length: - 05103089 - 05103092: 15 m in the box - 05103093 - 05103095: 10 m in the box - 05103096: 8 m in the box - 05103097: 5 m in the box - 05103098: 3 m in the box nominal diameter in in inches: 3/4 inch wall thickness after shrinkage: 0.77 mm inside Ø before - after shrinkage: 19.1 - 9.5 mm

Shrink tubing, thin-walled flexible shrink tubing, application area: cable protection, insulation, marking and wrapping, shrink temperature: min. 90 °C, flameproof, self-extinguishing, tensile strength: 13 N/mm2, weight: 1.45 g/cm3, impact strength: 20 kV/mm, color: green-yellow. Length: - 05103099 - 05103102: 15 m in the box - 05103103 - 05103105: 10 m in the box - 05103106: 8 m in the box - 05103107: 5 m in the box - 05103108: 3 m in the box nominal diameter in in inches: 3/4 inch wall thickness after shrinkage: 0.77 mm inside Ø before - after shrinkage: 19.1 - 9.5 mm

Shrink tubing, thin-walled flexible shrink tubing, application area: cable protection, insulation, marking and wrapping, shrink temperature: min. 90°C, flameproof, self-extinguishing, tensile strength: 13 N/mm2, weight: 1.45 g/cm3, impact strength: 20 kV/mm, color: red. Length: - 05103109 - 05103112: 15 m in the box - 05103113 - 05103115: 10 m in the box - 05103116: 8 m in the box - 05103117: 5 m in the box - 05103118: 3 m in the box nominal diameter in in inches: 3/4 inch wall thickness after shrinkage: 0.77 mm inside Ø before - after shrinkage: 19.1 - 9.5 mm

Hot-shrink connection fittings 0,6/1 kw (1,2kV) For 4- and 5-core plastic-insulated cables, made of high-quality crosslinked polyofin, shrinkage rate 4:1, continuous use temperature -40°C to +120°C, non-corrosive and cadmium-free, color: black, delivery length: 400 mm cable up to mm2: 5 x 1.5/5 x 16 sleeve length: 400 mm

Shrink hoses, thin-walled flexible shrink hose. Application: Cable protection, insulation, marking and finishing. Shrink temperature: min. 90°C. Self-extinguishing. Tensile strength: 13 N/mm2. Weight: 1.45 g/cm3. Impact strength: 20 kV/mm. Colour: black. Length: - 05103069 - 05103072: 15 m in the box - 05103073 - 05103075: 10 m in the box - 05103076: 8 m in the box - 05103077: 5 m in the box - 05103078: 3 m in the box nominal diameter in inches: 3/16 inch inner diameter before - after shrinkage: 4.8 - 2.4 mm wall thickness after shrinkage: 0.51 mm

Shrink hoses, thin-walled flexible shrink hose. Application: Cable protection, insulation, marking and finishing. Shrink temperature: min. 90°C. Self-extinguishing. Tensile strength: 13 N/mm2. Weight: 1.45 g/cm3. Impact strength: 20 kV/mm. Colour: black. Length: - 05103069 - 05103072: 15 m in box - 05103073 - 05103075: 10 m in box - 05103076: 8 m in box - 05103077: 5 m in box - 05103078: 3 m in box nominal diameter in in inches: 1/4 inch inner diameter before - after shrinkage: 6,4 - 3,2 mm wall thickness after shrinkage: 0,64 mm

Shrink hoses, thin-walled flexible shrink hose. Application: Cable protection, insulation, marking and finishing. Shrink temperature: min. 90°C. Self-extinguishing. Tensile strength: 13 N/mm2. Weight: 1.45 g/cm3. Impact strength: 20 kV/mm. Colour: black. Length: - 05103069 - 05103072: 15 m in the box - 05103073 - 05103075: 10 m in the box - 05103076: 8 m in the box - 05103077: 5 m in the box - 05103078: 3 m in the box nominal diameter in in inches: 3/8 inches internal diameter before - after shrinkage: 9.5 - 4.7 mm

Shrink tubing, thin-walled flexible shrink tubing, application area: cable protection, insulation, marking and wrapping, shrink temperature: min. 90 °C, flameproof, self-extinguishing, tensile strength: 13 N/mm2, weight: 1.45 g/cm3, impact strength: 20 kV/mm. Color: blue. Length: - 05103079 - 05103082: 15 m in box - 05103083 - 05103085: 10 m in box - 05103086: 8 m in box - 05103087: 5 m in box