Muff technology

Shrink hoses, medium wall With adhesive inner coating, shrink rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm wall thickness after shrinkage: 1.7 mm Colour: black Length: 1 m With internal adhesive: Yes Shrink rate: 3:1 Shrink: 8 - 2 mm

Shrink hoses, thin-walled free of lead and cadmium, roll goods in dispenser box, thin-walled, without thermoplastic adhesive, labelable, resistant to chemical influences, resistant to UV radiation, free of paint wetting disruptive substances, non-corrosive, unmeltable, high tensile strength, high cold flexibility, cold flux resistant (heat-shape stable,) High flexibility, halogen-free

Shrink hoses, thin-walled free of lead and cadmium, roll goods in dispenser box, thin-walled, without thermoplastic adhesive, labelable, resistant to chemical influences, resistant to UV radiation, free of paint wetting disruptive substances, non-corrosive, unmeltable, high tensile strength, high cold flexibility, cold flux resistant (heat-shape stable,) High flexibility, halogen-free

Shrink hoses, thin-walled free of lead and cadmium, roll goods in dispenser box, thin-walled, without thermoplastic adhesive, labelable, resistant to chemical influences, resistant to UV radiation, free of paint wetting disrupting substances, non-corrosive, unmeltable, high tensile strength, high cold flexibility, cold flux resistant (heat-shape stable,) High flexibility, halogen-free

Shrink hoses, thin-walled free of lead and cadmium, roll goods in dispenser box, thin-walled, without thermoplastic adhesive, labelable, resistant to chemical influences, resistant to UV radiation, free of paint wetting disruptive substances, non-corrosive, unmeltable, high tensile strength, high cold flexibility, cold flux resistant (heat-shape stable,) High flexibility, halogen-free

Shrink hoses, thin-walled free of lead and cadmium, roll goods in dispenser box, thin-walled, without thermoplastic adhesive, labelable, resistant to chemical influences, resistant to UV radiation, free of paint wetting disrupting substances, non-corrosive, unmeltable, high tensile strength, high cold flexibility, cold flux resistant (heat-shape stable,) High flexibility, halogen-free

Replacement casting resin EG is suitable for the following types of cables: plastic and paper-insulated low-voltage cables up to 1kw. Plastic and paper-insulated telecommunication and message cables. medium-voltage cable as mechanical protection and moisture protection, replacement casting resin for PGM casting resin sleeves, content: 286 ml, 2-component PUR casting resin, in the practical two-chamber mixing bag, good flow behavior. Curing time: about 24 hours depending on the outside temperature. Halogen-free: Yes

Shrink hoses, medium-walled With adhesive inner coating, shrinkage rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm Colour: black Length: 1 m Operating temperature range: -40 - 120 °C With internal adhesive: Yes Shrink rate: 3:1 Shrinkage strength: 34 - 7 mm

Shrink hoses, medium-walled With adhesive inner coating, shrinkage rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm Colour: black Length: 1 m Operating temperature range: -40 - 120 °C With internal adhesive: Yes Shrink rate: 3:1 Shrinkage strength: 22 - 6 mm

Shrink hoses, medium wall With adhesive inner coating, shrinkage rate 4:1, resistant to oils, fats, acids, alkalis, salts, solvents and UV rays, wall thickness 2.5 mm, silicone-free, impact strength: 25 kV/mm Colour: black Length: 1 m Operating temperature range: -40 - 120 °C With internal adhesive: Yes Shrink rate: 3:1 Shrinkage strength: 12 - 3 mm

Gas and longitudinal water-tight to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 15 - 41 mm Length: 800 mm Minimum diameter Wall breakage: 70 mm Colour: black

Gas and longitudinal water-tight to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 12 - 26 mm Length: 800 mm Minimum diameter Wall breakage: 55 mm Colour: black

Gas and longitudinal water resistant to 0.1 Mpa, resistant to hydrocarbons, alkaline earths and soil salts, for wall thicknesses up to a maximum of 470 mm, cold flow resistant, UV-resistant cable diameter: 8 - 14 mm Length: 800 mm Minimum diameter Wall breakage: 40 mm Colour: black

0,6/1 kw (1,2kV) For 4- and 5-core plastic-insulated cables, made of high-quality crosslinked polyofin, shrinkage rate 4:1, continuous use temperature -40°C to +120°C, non-corrosive and cadmium-free, color: black, delivery length: 400 mm cable up to mm2: 4 x 16/4 x 50 sleeve length: 600 mm

Hot-shrink connection fittings 0,6/1 kw (1,2kV) For 4- and 5-core plastic-insulated cables, made of high-quality crosslinked polyofin, shrinkage rate 4:1, continuous use temperature -40°C to +120°C, non-corrosive and cadmium-free, color: black, delivery length: 400 mm cable up to mm2: 5 x 6/5 x 25 sleeve length: 500 mm