Fastening material

Hexagonal wood screws DIN 571, hexagonal head, surface: galvanically galvanized, partial thread. Material: steel shaft diameter: 10 mm Length: 80 mm Key width: 17 mm

Material: Polyamide, screw-in nail with flat head, for minor fastenings in construction, metal, sanitary and electrical areas, for fastening light loads, such as angles, plates, sheets, cable ducts and any components for non-slower assembly, Removable by drive in the screw head, areas of use: concrete, solid brick, lime sandstone, pore concrete, high hole brick, limestone temperature. Screw nail included Length: 60 mm Hole diameter: 8 mm

Suitable for: concrete, solid stones, pore concrete, limited for perforated stones and hollow blocks. For fastening objects which can be fastened with wood and chipboard screws. Optimal screw guidance through rib-shaped inner geometry. Fireproof pipe fitting according to technical guidelines for gas pipe installation (TRGI 3.3.7.2.). In the case of pore concrete P2 and P4, the dowel can be tapped without pre-drilling (restriction PMUD 10 drill Ø 6 at P2 or. Ø 8 at P4) Dowel-Ø: 8 mm Length: 60 mm Hole depth: 70 mm

Connection clamps According to DIN EN 60998-1 and DIN EN 60998-2-1, Material: Insulated part Polypropylene, Clamp bolt (contact part): Steel, Maximum ambient temperature T110, Halogen-free, Pole easily separable, 12-pin clamping strip, nominal voltage 450W Cross section: 6 - 10 mm2

Connection clamps According to DIN EN 60998-1 and DIN EN 60998-2-1, Material: Insulated part Polypropylene, Clamp bolt (contact part): Steel, Maximum ambient temperature T110, Halogen-free, Pole easily separable, 12-pin clamping strip, nominal voltage: 450W Cross section: 6 - 10 mm2

Iso-dowels, hard foam material: PE polyethylene, For installation in insulation (heat insulation house wall,) polystyrene, For attachment of components (e.g. mailboxes, house signs, lighting, motion detectors, alarm systems, etc. in refrigeration/air construction, insulating construction, prefabricated building, facade construction, electrical installation) in conjunction with wood,- chipboard and metrical screw connection in stainless steel. The cover must then be sealed with silicone to avoid penetration of water, No formation of heat bridges, temperature neutral from -20°C to +100°C, rotting,- ageing and weathering resistant, setting tool included in delivery (for PIDH 50 - Art. No. 05103449 / for PIDH 95 - Art. No. 05103219,)

Hexagonal distance sleeve fire galvanized distance sleeve made of steel, surface: galvanically galvanized. Screw system: hexagonal. Material: steel Length: 25 mm Thread diameter: 6 mm

Suitable for: panels, panels and for hollow wallwork and hollow ceilings with large chambers, limited for perforated materials. For fastening: pictures, lamps, base strips, key boxes, wall shelves, hanging cabinets, towel holders, curtain rails. Multiple split dowel with pre-assembled metric screw. Material: galvanized. Easy assembly with screwdriver or assembly pliers. The spreading support elements guarantee a large bearing surface behind the plate and optimal holding values. The screw can be released again without loss of the holding force of the dowel on the plate. Pmhd4x6s - PMHD6x38S: with metric cross screw. PMHD8x16S + PMHD8x32S: with metric hexagonal screw. All details in the table in mm dowel Øxl: 12x80 screw Øxl: M6x88 plate thickness: 27 - 38

50 % or more. Screw nail included Length: 40 mm Hole diameter: 6 mm

Material: polypropylene. Halogen-free. Colour: natural. Material nail: steel. Number of lines NYM 3x1.5 mm2 : 2. Material disc: plastic. With nail. Nail length: 40 mm nail-Ø: 3 mm

Hexagonal distance sleeve fire galvanized distance sleeve made of steel, surface: galvanically galvanized. Screw system: hexagonal. Material: steel Length: 40 mm Thread diameter: 12 mm

Material: Polyamide, screw-in nail with flat head, for minor fastenings in construction, metal, sanitary and electrical areas, for fastening light loads, such as angles, plates, sheets, cable ducts and any components for non-slower assembly, Removable by drive in the screw head, areas of use: concrete, solid brick, lime sandstone, pore concrete, high hole brick, limestone temperature. Screw nail included Length: 80 mm Hole diameter: 6 mm

Application for the combination of rigid and flexible conductors, temperature resistance: -30°C to +110°C, self-extinguishing to UL 94V-2, with test slot, side with release pusher 0.52.5 mm2 / side without release pusher 0.752.5 mm2 Number of clamping points: 2 Colour: white Rated voltage: 450 W Rated current: 24 A Suitable for solid conductors: Yes Suitable for flexible conductors: Yes

Hexagonal screws DIN 933m, similar to ISO 4017, hexagonal head, surface: galvanized, thread to head, metric thread. Material: steel. Material quality: 8.8 (steel) Length: 30 mm Key width: 13 mm Thread: M8

Hexagonal wood screws DIN 571, hexagonal head, surface: galvanically galvanized, partial thread. Material: steel shaft diameter: 8 mm Length: 50 mm Key width: 13 mm