Fastening material

Plastic dowel use with wood or chipboard screws, temperature resistance: -40°C to +75°C, suitable for concrete B25, solid brick, natural stone, block brick, with collar / rim: PNDK 526, 631, 841, 1060. Material quality: Nylon. Length: 30 mm Hole diameter: 6 mm

Suitable for: gypsum board, limited for gypsum fiber boards, solid gypsum boards and pore concrete. For fastening: objects that can be fastened with wood or chipboard screws: pictures, lamps, base strips, key boxes, spice shelves. Time-saving fastening system. Cutting into the building material ensures optimal anchoring. Effortless setting with cross-slot blade, by hand or with electric drill screwdriver. No special setting tool required. Very good centering by dowel tip. No bursting on the back of the plate. Heat resistant. Length: 34 mm. Screw-Ø: 4-5 mm. Material: zinc die casting. PGKDM34S: With screw (Senkkopf, Pozidrive, blue galvanized, 4.0 x 40, full thread)

Plug clamps 7-12 mm For fastening NYM 3x1.5 mm2 or. 5x1.5 mm2, Hole 6 mm Version: simple Length: 30 mm

Fitting bolt without thread, wide collar, shooting bolt quality, use: fixing of sanitary, electrical installation clamps, pipe brackets and perforated belt directly in concrete and solid materials, material: steel collar diameter: 8 mm length: 14 mm collar-Ø: 8 mm

Hexagonal screws DIN 933m, similar to ISO 4017, hexagonal head, surface: galvanized, thread to head, metric thread. Material: steel. Material quality: 8.8 (steel) Length: 50 mm Key width: 13 mm Thread: M8

Hexagonal wood screws DIN 571, hexagonal head, surface: galvanically galvanized, partial thread. Material: steel shaft diameter: 8 mm Length: 80 mm Key width: 13 mm

Plastic dowels use with wood or chipboard screws, temperature resistance: -40°C to +75°C, suitable for concrete B25, solid brick, natural stone, block brick, with collar / rim: PNDK 526, 631, 841, 1060. Material quality: Nylon. Length: 40 mm Hole diameter: 8 mm

Hexagonal distance sleeve fire galvanized distance sleeve made of steel, surface: galvanically galvanized. Screw system: hexagonal. Material: steel Length: 30 mm Thread diameter: 10 mm

Suitable for: concrete, solid stones, pore concrete, limited for perforated stones and hollow blocks. For fastening objects which can be fastened with wood and chipboard screws. Optimal screw guidance through rib-shaped inner geometry. Fireproof pipe fitting according to technical guidelines for gas pipe installation (TRGI 3.3.7.2.). In the case of pore concrete P2 and P4, the dowel can be tapped without pre-drilling (restriction PMUD 10 drill Ø 6 at P2 or. Ø 8 at P4) Dowel-Ø: 10 mm Length: 60 mm Hole depth: 75 mm

Spring folding dowel surface: galvanically galvanized, design: with threaded shaft, material: steel, with washer, With static (smooth) load, if no failure of the anchoring base can occur. Unfortunately, we cannot make any statements regarding loadability values in different fastening objects. Dowel length: 85 mm thread: M3 Max. Load: 75 N

Mounting pliers for metal hollow space dowels Assembly pliers for easy and safe fastening of metal hollow space dowels. They put the screw head of the dowel into the tong receptacle and push the dowel into the pre-drilled hole. By pressing the pliers together, the dowel can be set clean and clamped. Suitable for screw size M4, M5, M6 and M8.

Hexagonal screws DIN 933m, similar to ISO 4017, hexagonal head, surface: galvanized, thread to head, metric thread. Material: steel. Material quality: 8.8 (steel) Length: 40 mm Key width: 13 mm Thread: M8

Protection type according to EN 60529 IP68 to 5 bar (30 min). Optimum sealing and strain relief by patented lamella system. Cable connection with metric and short connection thread, with O-ring on connection thread. Material: brass nickel-plated. Material Clamp cage: polyamide. Material seal: EPDM. Surface: nickel. Application temperature range: -40° C. to +100° C., short to about 120° C. Protection class: IP68 (5 bar 30 min.). IP69. Halogen-free. Thread type: metric. Type of seal: sealing ring. Stroke. Execution of strain relief: A. Increase: 1.5 thread length: - PKWMM12, PKWMM16 = 5 mm - PKWMM20 = 6 mm - PKWMM25 = 7 mm - PKWMM32, PKWMM40 = 8 mm - PKWMM50 = 9 mm - PKWMM63 = 10 mm - PKVMM75 = 12 mm

Composite mortar Plus fire protection test
. ETA for: concrete, high hole brick, reinforcement. Also suitable for: masonry brick, lime sandstone, light concrete stone, lime sandstone, hollow block of light concrete Hbl2, Hbl4, hollow block stone of concrete, hollow body ceilings. Universal, suitable for almost all building materials and a wide range of applications. Powerful 2-component synthetic resin mortar for high loads based on vinyl ester. For spread-pressure and stress-free anchoring. For processing with threaded rods or reinforcement steel. Styrene-free and therefore low-odor, user-friendly processing. Broken cartridges are reusable with a new static mixer. 300 ml cartridges can be processed with commercially available silicone extrusion guns. Store cool and dry, +5°C to +20°C. Do not use the first stroke (about 10 ml). Insert mortar into the borehole only when it is uniformly colored. After use, the cartridge can be closed and stored again and can be reused with a new mixer. 1 compound mortar 300 ml + 2 static mixers.

Hexagonal distance sleeve fire galvanized distance sleeve made of steel, surface: galvanically galvanized. Screw system: hexagonal. Material: steel Length: 30 mm Thread diameter: 8 mm