List of products by brand Jung

Switch actuator, 2x, UP, with integrated bus coupler, with branch connection, ETS product family: output, product type: binary output 2x, supply KNX: voltage: DC 21 to 32 W =, power consumption: typical 150 mw, connection: prefabricated line, YY 6 x 0.6, approx. 33 cm long, capable of being extended to a maximum of 5 m, output: number 2, switch type: 2 closers (potential-free relay contacts, -?contacts,) maximum switching voltage: AC 230 W ~, maximum switching current: 2 x 6 A at AC 230 W ~, switching power: incandescent lamps 1200 W, HV halogen lamps 1200 W, NV halogen lamps 500 VA (conventional transformer)

Rotary dimmer, with pressure interchanger, rated voltage: AC 230/240 W ~, 50 Hz, connection power: 230/240 V-Glüh- und -Halogenlampen 100 to 1000 W, mixed loads of specified load types, minimum load: 100 W, maximum clamping power cross-section: 2 x 2.5 mm2 or 1 x 4 mm2, alternating circuit via mechanical interchanger, alternating circuit with 2 dimmers not allowed

Rotary dimmer, with pressure interchanger, rated voltage: AC 230/240 W ~, 50 Hz, connection power: 230/240 V-Glüh- und -Halogenlampen 100 to 1000 W, mixed loads of specified load types, minimum load: 100 W, maximum clamping power cross-section: 2 x 2.5 mm2 or 1 x 4 mm2, alternating circuit via mechanical interchanger, alternating circuit with 2 dimmers not allowed

Number of hours

Connector, for water-protected devices WG 600

Locking plate

3-wire, application, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 0,3 W, connection: screw clamps, 1 x 0.5 to 4 mm2 or 2 x 0.5 to 2.5 mm2 (inertial and intact without end sleeve) and 1 x 0.5 to 4 mm2 or 2 x 0.5 to 1.5 mm2 (inertial with end sleeve,) total length side contact line: maximum 100 m, ambient temperature: - 5 to + 45 °C, for side contact control of a rotary dimmer

Universal, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: max. 0.2 W, contact type: μ, operation with suitable attachment, automatic control via timer, operation as main point or side point possible, wind alarm locking via the side point input, via side points input, integration into group or central controls is possible, conversion function of the outputs for simplified start-up. 120 s, connection: screw clamps: 0.75 to 4 mm2 (inertial,) 0.75 to 2.5 mm2 (inertial with end sleeve,) connection power: motors: 700 W, ambient temperature: - 5 to + 45°C, for controlling electrically operated blinds, roller shutters and awnings

Rotary dimmer Universal LED, insert, with incremental encoder and auxiliary point input, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 20 mm diameter

Standard, nominal voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: max. 0.2 W, contact type: μ, operation with suitable attachment, automatic control via timer, storage of a ventilation position via the attachment possible, reverse polarity function of the outputs for simplified commissioning from version V01, runtime: approx. 120 s, connection: motors: 700 W, connection: screw terminals: 0.75 to 4 mm2 (indicated,) 0.75 to 2.5 mm2 (finely with core end sleeve,) ambient temperature: - 5 to + 45°C, for controlling electrically operated blinds, roller shutters and awnings

Rotary dimmer standard LED, use, with incremental transmitter, nominal voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 20 mm

D.10

No. 2-wire, application, nominal voltage: AC 230 W ~, mains frequency: 50/60 Hz, connection: screw terminals, 1 x 0.5 to 4 mm2 or 2 x 0.5 to 2.5 mm2 (single and fine-drained without wire end sleeve) and 1 x 0.5 to 4 mm2 or 2 x 0.5 to 1.5 mm2 (skinned with wire end sleeve,) total length of side points:.

Probe dimmer Universal LED, use, with auxiliary input, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 20 mm

Sensor dimmer standard LED, use, rated voltage: AC 230 W ~, mains frequency: 50/60 Hz, standby power: approx. 20 mm